- Offers 16 to 30V dc supply voltage with two NPN or two PNP outputs, depending on model
- Allows central monitoring and control of operation status over a DeviceNet control network
- Connects to DeviceNet Bus Network using simple junction boxes or T-connectors
- Determines target object location, overall size, total height or width, using up to two of eight programmable measurement modes
- Provides four configurable scanning methods
- Includes continuous or gated scanning
- Allows control of scan initiation with separate gate input
- Ignores activity in unlimited fields along the length of the array with programmable blanking
- Includes advanced configuration software
DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc.
- Offers 16 to 30V dc supply voltage with one NPN or one PNP output, and either two 0-10V dc or two 4-20 mA analog outputs, depending on model
- Determines target object location, overall size, total height or width, using up to two of nine programmable measurement modes
- Provides four configurable scanning methods
- Includes continuous or gated scanning
- Allows control of scan initiation with separate gate input
- Ignores activity in one or two fields along the length of the array with programmable blanking
- Supports serial communication (ASCII or binary) with a host computer or PLC using RS-232 or RS-485 interface
- Includes advanced configuration software
- Offers 16 to 30V dc supply voltage with either 16 NPN or 16 PNP outputs, depending on model
- Determines target object location, overall size, total height or width, using up to two of ten programmable measurement modes
- Counts the number of clear-to-blocked and blocked-to-clear transitions and then partitions the array into a maximum of 16 regions with two additional measurement modes
- Provides four configurable scanning methods
- Includes continuous or gated scanning
- Allows control of scan initiation with separate gate input
- Ignores activity in unlimited fields along the length of the array with programmable blanking
- Supports serial communication (ASCII or binary) with a host computer or PLC using RS-232 or RS-485 interface
- Includes advanced configuration software
- Offers 16 to 30V dc supply voltage with either two NPN, two PNP, or one NPN and one reed outputs, depending on model
- Determines target object location, overall size, total height or width, using up to two of ten programmable measurement modes
- Provides four configurable scanning methods
- Includes continuous or gated scanning
- Allows control of scan initiation with separate gate input
- Ignores activity in one or two fields along the length of the array with programmable blanking
- Supports serial communication (ASCII or binary) with a host computer or PLC using RS-232 or RS-485 interface
- Includes advanced configuration software
- Available in 10 array lengths, from 130 mm to 1.8 m, to fit a wide range of applications
- Features compact emitter/receiver footprint—just 38 square mm
- Available with 9.5 or 19 mm beam spacing
- Features ranges to 17 m, depending on length and beam spacing
- Detects objects as small as 12.7. to 38 mm, depending on model
- Makes status monitoring easy with indicators visible from three sides
- Features optional heated enclosures for outdoor applications
- Features low-profile, programmable measuring light screen systems for inspections and profiling
- Includes a controller, emitter/receiver pair and interconnecting cables
- Offers programmable controller with a selection of measurement modes, scan modes and output configurations
- Available in heights from 133 to 1819 mm, depending upon model
- Offers emitters/receivers for detecting objects as small as 12.7 mm
- Includes advanced configuration software
- Available in models for central monitoring and control over a DeviceNet control network
- Features optional heated enclosures for outdoor applications
DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc.