Страницы:
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: |  |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 250 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 250 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 0...10 V, 3-wire | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 14 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 4 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.16 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.16 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.16 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Flying leads, 1.5 m, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.16 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.16 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.25 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.25 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.25 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.25 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.4 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.4 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.4 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.6 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 0.6 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 25 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA, 2-wire | ||
| Gauge pressure: | 0 bar ... 0.1 bar up to 0 bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 0.25 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +30 bar | ||
| Performance | |||
| Accuracy: | ≤ ± 0.25 % of span | ||
| Non-linearity: | ≤ ± 0.2 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % Of span (at reference conditions) | ||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | ≤ ± 0.1 % of span | ||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | 1/4'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Flying leads, 3 m, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C, Additionally with flush-mounted membrane and cooling element -20 °C ... +150 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 0...5 V, 3-wire | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 2.5 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 25 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 4 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 0...10 V, 3-wire | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | 1/4'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Flying leads, 1.5 m, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -250 mbar ... 0 mbar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 female | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 0.9 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 0.6 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 female | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 0.6 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 0.6 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | 1/4'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 3 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 5 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 5 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 5 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -30 psi ... 0 psi | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | 1/4'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 14 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +30 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -30 psi ... 160 psi | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 0...10 V, 3-wire | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | 1/4'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 14 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | Plug M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 14 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 14 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | 1/4'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 14 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | ≤ ± 0.2 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % Of span (at reference conditions) | ||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | ≤ ± 0.1 % of span | ||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 16 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 0...10 V, 3-wire | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2Â B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 16 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | M20 x 1.5 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 25 bar | ||
| Температура процесса: | -40 °C ... 125 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/4 A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process temperature up to 125 °C (optional) |
| High shock and vibration resistance |
| Accuracy 0.5% or 0.25% |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Maximum installation flexibility due to availability of a large range of customary thread types |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 25 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | M20 x 1.5 | ||
| Детали, контактирующие с измеряемой средой: | Standard: Stainless steel | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
Страницы: