Страницы:
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 200 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Flying leads, 2 m, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: |  |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 200 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Leitungsausgang, 5 m, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 200 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 200 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 200 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Leitungsausgang, 5 m, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 200 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 2,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 2,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 2,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | 0.6 mm pressure port | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | 0.6 mm pressure port | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | 0.3 mm pressure port | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | 0.3 mm pressure port | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Leitungsausgang, 5 m, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 300 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | R ¼ ISO 7 (DIN2999) | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 3,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 3,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 3,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 500 psi | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 0,6 % der Spanne (bei Nichtlinearität 0,25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ B according to DIN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 500 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 500 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 500 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 500 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 5,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 5,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 5,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 5,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 5,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 8,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 15 psi up to 0 … 8000 psi |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 8,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 15 psi bis 0 … 8000 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 psi ... 8,000 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | 7/16-20 UNF SAE #4 J514 male | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Flying leads, 2 m, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Measuring ranges from 0 bar ... 6 bar up to 0 bar ... 600 bar |
| Various output signals and electrical connections available |
| Common process connections available |
| High overpressure safety. Pressure peak protection available upon request for selected process connections. |
| Circularly welded, hermetically sealed stainless steel membrane |
| Stainless steel housing with enclosure rating up to IPÂ 67 (with round connector M12 x 1) |
Your benefits
| A wide range of variants enables a perfect match to individual requirements |
| Space-saving due to its compact size |
| Time-saving due to quick and simple installation |
| Manufacturing capabilities that are aligned to OEM demands ensure an excellent price-performance ratio for application-specific solutions |
| Wetted parts are made from stainless steel for universal use even with a large variety of corrosive fluids |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA, 2-wire | ||
| Maximum ohmic load RA: | ≤ (L+ - 7 V) / 0.02 A [Ohm] with current output signal | ||
| Время инициализации: | 15 ms | ||
| Performance | |||
| Accuracy: | ≤ ± 1.2 % of span (at room temperature) | ||
| Non-linearity: | ≤ ± 0.6 % of span (best fit straight line, BFSL) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ ± 0.3 % of span (per year) | ||
| Temperature error: | ≤ ± 1.5 % of span | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Measurement deviation of zero signal: | ≤ ± 0.7 % of span | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 13-8 PH, Stainless steel 316L | ||
| Seal: | NBR | ||
| Pressure port: | 3.5 mm Standard | ||
| Материал корпуса: | Stainless steel 316L, PBT GF30 | ||
| Enclosure rating: | IP 67 (according to IEC 60529), for round connector 1) | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Supply voltage: | 8 V DC ... 30 V DC 2) | ||
| Isolation voltage: | 750 V DC | ||
| CE-conformity: | 2004/108/EC, EN 61326-1 emission (group 1, class B) and interference immunity (industrial application) and pressure equipment directive 97/23/EC | ||
| Reference conditions: | According to IEC 61298-1 | ||
| Maximum power consumption: | 25 mA (signal current, maximum 25 mA) | ||
| Класс защиты: | III | ||
| Overvoltage protection: | 36 V DC | ||
| защита от короткого замыкания: | Output QA towards M | ||
| Защита от обратной полярности: | L+ towards M | ||
| RoHS certificate: | |
||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Shock load: | 40 g (6 ms) according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g (20 Hz ... 2000 Hz, 120 min) according to IEC 60068-2-6 (vibration at resonance) | ||
| Ambient operating temperature: | -30 °C ... +100 °C | ||
At a glance
| Measuring ranges from 0 bar ... 6 bar up to 0 bar ... 600 bar |
| Various output signals and electrical connections available |
| Common process connections available |
| High overpressure safety. Pressure peak protection available upon request for selected process connections. |
| Circularly welded, hermetically sealed stainless steel membrane |
| Stainless steel housing with enclosure rating up to IPÂ 67 (with round connector M12 x 1) |
Your benefits
| A wide range of variants enables a perfect match to individual requirements |
| Space-saving due to its compact size |
| Time-saving due to quick and simple installation |
| Manufacturing capabilities that are aligned to OEM demands ensure an excellent price-performance ratio for application-specific solutions |
| Wetted parts are made from stainless steel for universal use even with a large variety of corrosive fluids |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 100 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA, 2-wire | ||
| Maximum ohmic load RA: | ≤ (L+ - 7 V) / 0.02 A [Ohm] with current output signal | ||
| Время инициализации: | 15 ms | ||
| Performance | |||
| Accuracy: | ≤ ± 1.2 % of span (at room temperature) | ||
| Non-linearity: | ≤ ± 0.5 % of span (best fit straight line, BFSL) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ ± 0.3 % of span (per year) | ||
| Temperature error: | ≤ ± 1.5 % of span | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Measurement deviation of zero signal: | ≤ ± 0.5 % of span | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 13-8 PH, Stainless steel 316L | ||
| Seal: | NBR | ||
| Pressure port: | 3.5 mm Standard | ||
| Материал корпуса: | Stainless steel 316L, PBT GF30 | ||
| Enclosure rating: | IP 67 (according to IEC 60529), for round connector 1) | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Supply voltage: | 8 V DC ... 30 V DC 2) | ||
| Isolation voltage: | 750 V DC | ||
| CE-conformity: | 2004/108/EC, EN 61326-1 emission (group 1, class B) and interference immunity (industrial application) and pressure equipment directive 97/23/EC | ||
| Reference conditions: | According to IEC 61298-1 | ||
| Maximum power consumption: | 25 mA (signal current, maximum 25 mA) | ||
| Класс защиты: | III | ||
| Overvoltage protection: | 36 V DC | ||
| защита от короткого замыкания: | Output QA towards M | ||
| Защита от обратной полярности: | L+ towards M | ||
| RoHS certificate: | |
||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Shock load: | 40 g (6 ms) according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g (20 Hz ... 2000 Hz, 120 min) according to IEC 60068-2-6 (vibration at resonance) | ||
| Ambient operating temperature: | -30 °C ... +100 °C | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 0.25 bar up to 0 … 16 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +24 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 0 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1 … +24 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 1.5 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Pressure port: | Front-flush membrane | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -20 °C ... 150 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 0...10 V, 3-wire | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 14 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 40 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 4...20 mA | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1/2 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + NBR O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector (DIN EN 175301-803 A), IP 65 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
At a glance
| Gauge pressure measurement ranges from 0 ... 0.1 bar up to 0 … 600 bar |
| Process connections G1 or G 1/2 with flush-mounted membrane |
| Accuracy 0.5% or 0.25% |
| Process temperature up to 150 °C (optional) |
| High shock and vibration resistance |
| Output signal 4 … 20 mA, 0 … 5 V, or 0 … 10 V |
| Zero and span adjustable |
| Electrical connection M12x1, L-connector according to DIN 175301-803 A or flying leads |
Your benefits
| Reliable and highly accurate measurement technology |
| Wide application range: The flush-mounted membrane enables pressure measurement in specific media such as sludges, slurries, pulp or highly viscous liquids |
| No mechanical wear, fatigue-proof, maintenance-free as no moving parts |
| Simple and cost-saving installation |
| Optimal solution for individual requirements due to very versatile configurability |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | -30 °C ... 100 °C | ||
| CE-conformity: | |
||
| Output signal: | 0...5 V, 3-wire | ||
| Performance | |||
| Accuracy: | |||
| Non-linearity: | |||
| Long-term drift/one-year stability: | |||
| Номинальный температурный коэффициент в диапазоне температур: | Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( | ||
| Rated temperature range: | 0 °C ... 80 °C | ||
| Non-repeatability: | |||
| Response time (10 % ... 90 %): | ≤ 1 ms (≤ 10 ms at medium temperatures below | ||
| Механика/электроника | |||
| Process connection: | G 1 B flush-mounted with O-ring | ||
| Детали, контактирующие с измеряемой средой: | With flush-mounted diaphragm: Stainless steel O-ring: NBR, FPM/FKM optional (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element) | ||
| Seal: | With flush-mounted membrane: wetted parts: CrNi-steel + FPM/FKM O-Ring | ||
| Материал корпуса: | Stainless steel | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | M12 x 1, 4-pin, IP 67 | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M | ||
| Dielectric strength: | 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) | ||
| Protection class III: | |
||
| Weight sensor: | 200 g | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -40 °C ... 100 °C | ||
| Ambient temperature: | -20 °C ... 80 °C | ||
| Shock load: | 1000 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 20 g according to IEC 60068-2-6 (vibration under resonance) | ||
Страницы: