Technical data | |||
Accessory family: | Connection modules | ||
Description: | Connection module AMS50-013 with integrated power supply for 230 V AC/24 V DC, 9-pin device socket and 9-pin device plug, terminal strip for signal distribution, enclosure rating IP 30 |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | BAM100 analogue module for Bulkscan, Fa. Beckhoff, Power supply: 24 V DC (-15%/+20%), Din rail module, 35 mm C-rail, acc. EN50022, Ethernet TCP/IP interface (RJ45), CoLA Communication, Analog signals:â3 x IN: 4 ... 20 mA, 4 x OUT: 4 ... 20 mA | ||
Enclosure rating: | IP 20 |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Facility for connecting two encoders. Connection to Drive Monitor FX3-MOC: Female connector, D-Sub HD, 15-pin. |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Electrical connection box for power, I/Os and RS-232/-422 data (no Ethernet), with three pre-wired M12 cables |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Electrical connection box for power, I/Os and RS-232/-422 data (no Ethernet), with three pre-wired M12 cables |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Electrical connection box for power (sensors, display, buzzer, Ethernet switch) |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Encoder RS-422 terminal for connection of up to eight Ranger E/D or Ruler E to one encoder. |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Outdoor Ethernet-Switch, 8 ports, operating temperature range -40 °C ... +75 °C |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Indoor Ethernet-Switch, 8 ports, operating temperature range 0 °C ... +55 °C |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Single port PCI board for connection to Gigabit Ethernet high-end camera |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | I/O box extension with 2 ethernet ports enabling switch functionality, number of logical input: 4, output: 8 |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | I/O module to add logical output to the I/O extension box, number of logical output = 8, only usage with accessory 6037654 |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | I/O extension module to extend the number of digital inputs in combination with I/O box extension. Number of digital inputs: 2, only usage with accessory 6037654 |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Facility for connecting one encoder (normally used in conjunction with a motor feedback encoder). Connection to Drive Monitor FX3-MOC: Female connector, D-Sub HD, 15-pin. Connection to a second motor feedback splitter box: Female connector, D-Sub, 9-pin. |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Network switch for MSC800 for image output |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Connection box for Power, I/O, with RS-232 interface for connecting the configuration interface and RS-422/-485 interface (switchable) for connecting the multifunctional interface |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Opto media converter with power supply (EU), RJ45 port to opto fibre (SC-type) |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Ranger M/C Connection terminal, Screw connectors for fast I/O and encoder connection, DSUB for camera connection, and plug for 24 V power supply |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | Ranger E/D connection terminal, screw connectors for fast I/O and encoder connection, DSUB for camera connection and plug for 24 V power supply |
At a glance
Data storage for IO-Link version 1.1, sensor configuration without IO-Link master |
Operation via two capacitive pushbuttons |
Transparent signal paths at pins 2, 4, and 5 |
IP 67 housing |
M12 plug connection |
Your benefits
Quick and easy configuration of IO-Link sensors when replacing a device |
Error-free parameter transfer at the sensor without input via keyboard |
Rapid transfer of parameters to any number of sensors |
Easy clip-on mounting |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | IO-Link version V1.1, Port class 2, PIN 2, 4, 5 galvanically connected, Supply voltage 18 V DC ... 32 V DC (limit values, operation in short-circuit protected network max. 8 A) | ||
Enclosure rating: | IP 67 |
At a glance
IO-Link USB gateway for connecting to a PC |
IO-Link versions V1.0 and V1.1 are supported |
Connection to SOPAS and FDT software |
Sensor power supply via USB interface and external power supply unit |
Small housing with operation and status displays |
Your benefits
Quick and easy configuration of IO-Link sensors without a PLC |
Immediate visual display of measured values and output states |
Easy parameter backup and restoration |
Easy analysis of sensor data directly on a PC |
Technical data | |||
Accessory family: | Connection modules | ||
Description: | IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A | ||
Enclosure rating: | IP 20 (EN 60529) |