With the FLOWSIC100 PN16 / CL150 gas flow measuring devices measurements can be carried out at pressures up to 16 bar. The ultrasonic transducers have a high acoustic power and are suited for transmitting measurements in large duct diameters up to 1700 mm or for difficult gas compositions. The sender/receiver units are available as hermetically sealed versions made of stainless steel or titanium. The standard system contains a control unit MCU and 2 sender/receiver units. The MCU is used for input and output of signals, for calculation of reference values (standardization) or mass flows, as well as user-friendly LCD interface.
At a glance
| Corrosion-resistant transducers made of stainless steel or titanium |
| Process pressure up to 16 bar |
| Hermetically sealed ultrasonic transducers |
| Integral measurement over the duct diameter |
| Measurement without pressure loss, therefore no influences on the process |
| Automatic function control with zero and span point check |
Your benefits
| Reliable and accurate measurement also at low gas velocities |
| No movable parts, therefore low maintenance |
| Measurement independent of pressure, temperature and gas composition |
| Representative measuring results due to measurement across the whole duct diameter |
| No influence on the gas flow due to contact-free measurement |
| User-friendly operation and device diagnosis via MCU control unit and SOPAS ET operating software |
Fields of application
| Natural gas industry |
| Chemical and plastics manufacturing industry |
| Petrochemical industry and refineries |
| Cement manufacturing |
| Steel and iron production |
| Pharmaceutical industry |
| Glass industry |
| Food industry |
| Technical data | |||
| Measurement principle: | Ultrasonic transit time difference measurement | ||
| Measured values: | Gas velocity Gas temperature Mass flow Sound velocity Volumetric flow, a. c. Volumetric flow s. c. |
||
| Max. number of measurands: | 1 | ||
| Measuring ranges: | Gas velocity: -40 ... 0 m/s / 0 ... 40 m/s | ||
| Comment: | Continuously adjustable | ||
| Температура процесса: | -40 ... +260 °C versions for lower temperatures on request |
||
| Давление процесса: | -0.5 ... 16 bar | ||
| Dust load: | ≤1 g/m3 | ||
| Nominal pipe size: | 0.15 ... 1.7 m | ||
| Length of measuring path: | 0.2 ... 2 m larger measuring distances on request |
||
| Ambient temperature: | FLSE100 sender/receiver units, MCUP control unit: -40 ... +60 °C | ||
| Electrical safety: | CE | ||
| Enclosure rating: | IP 65 | ||
| Analog outputs: | 1 output: 0/2/4 ... 22 mA, 750 Ω additional outputs if using I/O modules |
||
| Analog inputs: | 2 inputs: 0 ... 20 mA , 0 ... 10 V additional inputs if using I/O modules |
||
| Digital outputs: | 5 floating outputs (change-over contacts) 48 V, 1 A additional outputs if using I/O modules |
||
| Digital inputs: | 4 potential-free contacts additional inputs if using I/O modules |
||
| Interfaces: | Ethernet (option) RS-232 (service interface) RS-485 (option) USB 1.1 |
||
| Bus protocol: | Ethernet TCP/IP (option) Modbus (option) PROFIBUS DP (option) |
||
| Operation: | Via LC-display or software SOPAS ET | ||
| Device version: | Cross-duct version | ||
| System components: | Connection unit Flange(s) with tube FLSE100 sender/receiver units MCUP control unit |
||
| Mounting: | Installation angle 60°, Flange DIN PN16 or ANSI CL150 | ||