+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

Volume flow measuring device for process applications, FLOWSIC100 Process

 
 

With the FLOWSIC100 EX-Z2-PN16 / CL150 gas flow measuring devices measurements can be carried out at pressures up to 16 bar - also in hazardous areas Zone 2. The ultrasonic transducers have a high acoustic power and are suitable for measurements in large duct diameters up to 1700 mm or for difficult gas compositions. The sender/receiver units are available as hermetically sealed versions made of stainless steel or titanium. A retraction mechanism allows removal of the sender/receiver units during plant operation.

The standard system contains a MCU control unit and 2 sender/receiver units. The MCU is used for input and output of signals, for calculation of reference values (standardization) or mass flows, as well as user-friendly LCD interface.

At a glance

  • Corrosion-resistant transducers made of stainless steel or titanium
  • Explosion-proof version for applications in Zone 2 (ATEX)
  • Sender/receiver units with retraction mechanism
  • Process pressure up to 16 bar
  • Hermetically sealed ultrasonic transducers
  • Integral measurement over the duct diameter
  • Automatic function control with zero and span point check

    Your benefits

  • Reliable and accurate measurement also at low gas velocities
  • No movable parts, therefore low maintenance
  • Measurement independent of pressure, temperature and gas composition
  • Approved for usage in hazardous areas Zone 2 (ATEX)
  • Exchange of sender/receiver units during plant operation
  • Representative measuring results due to measurement across the whole duct diameter
  • No influence on the gas flow due to contact-free measurement
  • User-friendly operation and device diagnosis via MCU control unit and SOPAS ET operating software

    Fields of application

  • Natural gas industry
  • Chemical and plastics manufacturing industry
  • Petrochemical industry and refineries
  • Cement manufacturing
  • Iron and steel production
  • Pharmaceutical industry
  • Glass industry
  • Food industry
    Technical data
    Measurement principle: Ultrasonic transit time difference measurement
    Measured values: Gas velocity
    Gas temperature
    Mass flow
    Sound velocity
    Volumetric flow, a. c.
    Volumetric flow s. c.
    Max. number of measurands: 1
    Measuring ranges: Gas velocity: -40 ... 0 m/s / 0 ... 40 m/s
    Comment: Continuously adjustable
    Температура процесса: -40 ... +260 °C
    versions for lower temperatures on request
    Давление процесса: -0.5 ... 16 bar
    Dust load: ≤1 g/m3
    Nominal pipe size: 0.15 ... 1.7 m
    Length of measuring path: 0.2 ... 2 m
    larger measuring distances on request
    Ambient temperature: FLSE100 sender/receiver units, MCUP control unit: -40 ... +60 °C
    Ex-approvals ATEX: FLSE100 sender/receiver units: II 3 G EEx nA II T4
    certified by manufacturer
    MCUP control unit: II 3 G EEx nA IIC T4
    Ex-version optional; certified by manufacturer
    Electrical safety: CE
    Enclosure rating: IP 65
    Analog outputs: 1 output:
    0/2/4 ... 22 mA, 750 Ω
    additional outputs if using I/O modules
    Analog inputs: 2 inputs:
    0 ... 20 mA , 0 ... 10 V
    additional inputs if using I/O modules
    Digital outputs: 5 floating outputs (change-over contacts) 48 V, 1 A
    additional outputs if using I/O modules
    Digital inputs: 4 potential-free contacts
    additional inputs if using I/O modules
    Interfaces: Ethernet (option)
    RS-232 (service interface)
    RS-485 (option)
    USB 1.1
    Bus protocol: Ethernet TCP/IP (option)
    Modbus (option)
    PROFIBUS DP (option)
    Operation: Via LC-display or software SOPAS ET
    Device version: Cross-duct version
    System components: Connection unit
    Flange with retraction mechanism
    FLSE100 sender/receiver units
    MCUP control unit
    Diagnostics functions: Automatic check cycle for zero and span point
    Extended device diagnosis via SOPAS ET software
    Mounting: Installation angle 60°, Flange DIN PN16 or ANSI CL150
     

    Напишите нам

     
    Имя Отчество:
    *
     
    Адрес электронной почты:
    *
     
    Контактный телефон:
     
    Сообщение:
    *
     
    *
    - поля обязательные для заполнения!
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: