Facebook Mail.ru ok.ru ВКонтакте
 
+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 
 
 
 
 

DKS40

Главная » Продукция » SICK » Энкодеры » Инкрементальные энкодеры » DKS40
 
 
Страницы:
123
 



DKS40-E5J00330
Арт. 1035297

At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 330
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00360
    Арт. 1034654

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00380
    Арт. 1035776

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 380
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00400
    Арт. 1035089

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 400
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00500
    Арт. 1034655

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00512
    Арт. 1034656

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 512
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00600
    Арт. 1035301

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 600
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00720
    Арт. 1034657

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 720
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J01000
    Арт. 1034658

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J01024
    Арт. 1034659

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,024
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J01800
    Арт. 1037294

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,800
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J02000
    Арт. 1034817

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J02048
    Арт. 1034818

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,048
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K00050
    Арт. 1035794

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 50
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K00100
    Арт. 1035361

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 100
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K00200
    Арт. 1036377

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 200
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K00250
    Арт. 1035795

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 250
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K00360
    Арт. 1035796

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K00500
    Арт. 1035671

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K00600
    Арт. 1065652

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 600
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K01000
    Арт. 1035797

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K01024
    Арт. 1035234

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,024
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K01200
    Арт. 1036635

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,200
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K01510
    Арт. 1036716

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,510
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5K02000
    Арт. 1035672

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5L00200
    Арт. 1035384

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 200
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5L00360
    Арт. 1036148

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5L00500
    Арт. 1035723

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5L01000
    Арт. 1035576

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5L02000
    Арт. 1035549

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5L02048
    Арт. 1035410

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,048
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5M00010
    Арт. 1065326

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 10
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5M00050
    Арт. 1035750

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 50
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5M00300
    Арт. 1037170

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 300
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5M00600
    Арт. 1035330

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 600
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5M01000
    Арт. 1036327

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5M01024
    Арт. 1036328

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,024
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5M02000
    Арт. 1062028

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5P00050
    Арт. 1061665

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 50
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Тип подключения: Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5P00256
    Арт. 1067501

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 256
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Тип подключения: Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5P00360
    Арт. 1036072

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Тип подключения: Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5P00500
    Арт. 1035406

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Тип подключения: Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00010
    Арт. 1034608

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 10
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00016
    Арт. 1036178

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 16
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00020
    Арт. 1034609

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 20
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00050
    Арт. 1034610

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 50
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00064
    Арт. 1036376

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 64
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00100
    Арт. 1034611

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 100
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00200
    Арт. 1034612

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 200
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-P5J00250
    Арт. 1034613

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 250
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, Open Collector NPN, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 50 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
     


    Страницы:
    123
     

     
     
    ⋆
     
      197374, г. Санкт-Петербург,
    пр. Приморский, 137 к. 2
      +7 (812) 432-38-38
      +7 (812) 432-36-36
      пн-пт. 10:00 — 18:00
    © 2005-2023 — ООО «ЭйСиЭс»

    ←

    Facebook Mail.ru ok.ru ВКонтакте
     
    Информация
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: