+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

Магнитные датчики приближения с аналоговым выходом

Главная » Продукция » SICK » Магнитные датчики для пневмоцилиндров » Магнитные датчики приближения с аналоговым выходом
 
 
Страницы:
12
 



Арт. 1050919

At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 64 mm 1)
    Длина корпуса: 77 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045668

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 64 mm 1)
    Длина корпуса: 77 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045669

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 64 mm 1)
    Длина корпуса: 77 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062508

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 96 mm 1)
    Длина корпуса: 109 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053837

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 96 mm 1)
    Длина корпуса: 109 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050920

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 96 mm 1)
    Длина корпуса: 109 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045670

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 96 mm 1)
    Длина корпуса: 109 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045671

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 96 mm 1)
    Длина корпуса: 109 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062518

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 128 mm 1)
    Длина корпуса: 141 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053838

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 128 mm 1)
    Длина корпуса: 141 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1066719

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 128 mm 1)
    Длина корпуса: 141 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050921

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 128 mm 1)
    Длина корпуса: 141 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045672

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 128 mm 1)
    Длина корпуса: 141 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045673

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 128 mm 1)
    Длина корпуса: 141 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062521

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 160 mm 1)
    Длина корпуса: 173 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053839

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 160 mm 1)
    Длина корпуса: 173 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050922

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 160 mm 1)
    Длина корпуса: 173 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050685

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 160 mm 1)
    Длина корпуса: 173 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050740

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 160 mm 1)
    Длина корпуса: 173 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062519

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 192 mm 1)
    Длина корпуса: 205 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053840

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 192 mm 1)
    Длина корпуса: 205 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050923

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 192 mm 1)
    Длина корпуса: 205 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1047728

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 192 mm 1)
    Длина корпуса: 205 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050738

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 192 mm 1)
    Длина корпуса: 205 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062522

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 224 mm 1)
    Длина корпуса: 237 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053841

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 224 mm 1)
    Длина корпуса: 237 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050924

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 224 mm 1)
    Длина корпуса: 237 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050686

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 224 mm 1)
    Длина корпуса: 237 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050741

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 224 mm 1)
    Длина корпуса: 237 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062520

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 256 mm 1)
    Длина корпуса: 269 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053842

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 256 mm 1)
    Длина корпуса: 269 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050925

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 256 mm 1)
    Длина корпуса: 269 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050551

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 256 mm 1)
    Длина корпуса: 269 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1050739

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 256 mm 1)
    Длина корпуса: 269 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
     


    Страницы:
    12
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: