+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

Магнитные датчики приближения с аналоговым выходом

Главная » Продукция » SICK » Магнитные датчики для пневмоцилиндров » Магнитные датчики приближения с аналоговым выходом
 

Гибкие, точные, высококачественные – магнитные датчики приближения с аналоговым выходом от SICK

При выполнении различных задач, в которых используются пневматические цилиндры, важно определить больше параметров, чем просто положение отдельного поршня. Поэтому потребность в датчиках, выполняющих непрерывное измерение, постоянно растет. Это позволяет решать сложные задачи автоматизации без необходимости использования дорогих линейных двигателей. Для этого SICK предлагает аналоговые датчики положения . Эти датчики, диапазон измерения которых составляет до 1007 мм, объединяют в себе гибкость, простоту эксплуатации и высокую точность.

MPS 

  • Максимальная гибкость благодаря диапазонам измерения: 32 мм, 64 мм, 96 мм, 128 мм, 160 мм, 192 мм, 224 мм, 256 мм
  • Электрическая настройка нулевого и конечного положений с помощью кнопки Teach
  • Индивидуальная установка диапазона измерения с помощью функции программирования
  • Свободный выбор направления монтажа, экономящего кабель
  • Простое обслуживание и монтаж благодаря установке датчика в паз сверху
  • Короткая конструкция корпуса

MPA 

Точность и универсальность до 1007 мм

  • Измеряемое расстояние: от 107 до 1007 мм с шагом 36 мм
  • Выходной сигнал: 4 - 20 мА и 0 - 10 В в одном датчике
  • Может крепиться на любом цилиндре благодаря универсальному корпусу с адаптерами, в частности, на цилиндрах с T-пазом, круглых в сечении и на цилиндрах с направляющими спицами
  • Линейность 0.5 мм при времени отклика 1.15 мс
  • Точность 0.03 % и воспроизводимость 0.06 %
  • Защита корпуса IP 67


 
Страницы:
12
 



Арт. 1059479

At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 1,007 mm 1)
    Длина корпуса: 1,009 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059442

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 107 mm 1)
    Длина корпуса: 109 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1067049

    At a glance

  • Measured lengths from 107 to 1007 mm in 36 mm steps
  • Can be mounted on various cylinders thanks to its universal housing with adapters, e.g., cylinders with T-slot, round and tie rod cylinders
  • Integrated, sensor-based automation solutions with IO-Link
  • Synchronization of detection/actuation times with the real-time clock in the control, using time stamps
  • Enables extremely precise sensor/actuator synchronization
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Increased machine performance thanks to the sensor's minimal blind zone
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Cost-effective system performance improvement
  • Reduced load on control and network
  • Cycle time-independent, precisely timed object detection/actuator action
  • Functional synchronization of sensor/actuator units
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 107 mm 1)
    Длина корпуса: 109 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Advanced functions, Standard functions
    IO-Link advanced functions: Time measurement / timer, Timestamp
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059443

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 107 mm 1)
    Длина корпуса: 109 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059444

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 143 mm 1)
    Длина корпуса: 145 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059445

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 143 mm 1)
    Длина корпуса: 145 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059446

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 179 mm 1)
    Длина корпуса: 181 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059447

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 179 mm 1)
    Длина корпуса: 181 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059448

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 215 mm 1)
    Длина корпуса: 217 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059449

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 215 mm 1)
    Длина корпуса: 217 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059450

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 251 mm 1)
    Длина корпуса: 253 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059451

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 251 mm 1)
    Длина корпуса: 253 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059452

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 287 mm 1)
    Длина корпуса: 289 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059453

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 287 mm 1)
    Длина корпуса: 289 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059454

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 323 mm 1)
    Длина корпуса: 325 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059455

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 323 mm 1)
    Длина корпуса: 325 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059456

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 359 mm 1)
    Длина корпуса: 361 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059457

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 359 mm 1)
    Длина корпуса: 361 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059458

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 395 mm 1)
    Длина корпуса: 397 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059459

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 395 mm 1)
    Длина корпуса: 397 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059460

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 431 mm 1)
    Длина корпуса: 433 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059461

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 431 mm 1)
    Длина корпуса: 433 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059462

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 467 mm 1)
    Длина корпуса: 469 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059463

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 467 mm 1)
    Длина корпуса: 469 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059464

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 503 mm 1)
    Длина корпуса: 505 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059465

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 503 mm 1)
    Длина корпуса: 505 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059466

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 539 mm 1)
    Длина корпуса: 541 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059467

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 575 mm 1)
    Длина корпуса: 577 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1062570

    At a glance

  • Measured lengths from 107 to 1007 mm in 36 mm steps
  • Can be mounted on various cylinders thanks to its universal housing with adapters, e.g., cylinders with T-slot, round and tie rod cylinders
  • Integrated, sensor-based automation solutions with IO-Link
  • Synchronization of detection/actuation times with the real-time clock in the control, using time stamps
  • Enables extremely precise sensor/actuator synchronization
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Increased machine performance thanks to the sensor's minimal blind zone
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Cost-effective system performance improvement
  • Reduced load on control and network
  • Cycle time-independent, precisely timed object detection/actuator action
  • Functional synchronization of sensor/actuator units
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 575 mm 1)
    Длина корпуса: 577 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Advanced functions, Standard functions
    IO-Link advanced functions: Time measurement / timer, Timestamp
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059468

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 611 mm 1)
    Длина корпуса: 613 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059469

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 647 mm 1)
    Длина корпуса: 649 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059470

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 683 mm 1)
    Длина корпуса: 685 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059471

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 719 mm 1)
    Длина корпуса: 721 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059472

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 755 mm 1)
    Длина корпуса: 757 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059473

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 791 mm 1)
    Длина корпуса: 793 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059474

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 827 mm 1)
    Длина корпуса: 829 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059475

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 863 mm 1)
    Длина корпуса: 865 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059476

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 899 mm 1)
    Длина корпуса: 901 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059477

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 935 mm 1)
    Длина корпуса: 937 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1059478

    At a glance

  • Analog positioning sensor that can be mounted with adapters on various cylinders thanks to its universal housing, e.g., cylinders with T-slot, round and tie rod cylinders
  • Measuring lengths from 107 mm to 1,007 mm in 36 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Linearity of 0.5 mm at a sample rate of 1.15 ms and an resolution of 0.06 mm
  • Electric setting of zero point and end point via teach-in button
  • IP 67 enclosure rating

    Your benefits

  • Maximum flexibility through measuring ranges from 107 mm to
  • 1,007 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Saves time due to configurable start and end points via intelligent Teach Pad
  • A rugged aluminum housing, the capacitive Teach Pad and the anti-kink cable guarantees a long operational lifetime of the sensor and reduces maintenance costs
  • Time savings through simple commissioning and diagnostics thanks to a 4-color LED display
  • Analog power, voltage signal and IO-Link in a single sensor reduces the range of variants and thereby lowers warehousing costs
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog, IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder types with adapter: Round body cylinder
    T-slot
    Tie rod cylinder
    Measuring range: 971 mm 1)
    Длина корпуса: 973 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 65
    IP 67
    IP 68 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA, strengthened
    IO-Link:
    Output indicator:
    Linearity typ.: 0.5 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1.15 ms
    Материал корпуса: Aluminum
     
    Арт. 1072897

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 32 mm 1)
    Длина корпуса: 45 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.8 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 2 mT
    Sampling rate typ.: 1 ms
    Материал корпуса: Plastic
     
    Арт. 1054862

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 32 mm 1)
    Длина корпуса: 45 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062506

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 32 mm 1)
    Длина корпуса: 45 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053835

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 32 mm 1)
    Длина корпуса: 45 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1073318

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 128 mm 1)
    Длина корпуса: 141 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 1 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.8 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
    Материал корпуса: Plastic
     
    Арт. 1050918

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 32 mm 1)
    Длина корпуса: 45 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045666

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 32 mm 1)
    Длина корпуса: 45 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1045667

    At a glance

  • Analog positioning sensor for pneumatic and hydraulic cylinders with T-slot
  • Measuring lengths from 32 mm to 256 mm in 32 mm steps
  • Output signals 4 mA to 20 mA as well as 0 V to 10 V in a single sensor
  • Superior precision: 0.05 mm resolution typ., 0.1 mm repeatability typ., 0.3 mm linearity typ., 1 ms measurement rate typ.
  • Electric setting of zero point and end point via teach-in button (optional)

    Your benefits

  • Convenient installation and sensor replacement due to drop-in installation
  • Maximum flexibility through measuring ranges from 32 mm to 256 mm
  • Increased machine performance thanks to the sensor’s minimal blind zone
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Selectable installation direction to optimize cabling
  • Simple commissioning due to “in-range” indicator
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link save time and money
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 32 mm 1)
    Длина корпуса: 45 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable, 2 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1062507

    At a glance

  • Magnetic position sensor for pneumatic cylinders with T-slot
  • Output signal: IO-Link
  • Superior precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms measurement rate
  • Electric setting of zero point and end point via teach-in button (optional)
  • Various lengths available from 32 - 256 mm
  • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Easy analog output setup: adjustable zero and end point can be taught via single button
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • IO-Link provides easy data access from the PLC
  • Quick and easy configuration
    Features
    Output function: IO-Link
    Electrical wiring: DC 4-wire
    Teach-in: 1
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 64 mm 1)
    Длина корпуса: 77 mm
    Enclosure rating: IP 67 2)
    IO-Link functions: Standard functions
    Механика/электроника
    Тип подключения: Cable with connector M12, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    IO-Link:
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
    Арт. 1053836

    At a glance

  • Magnetic position sensor for pneumatic and hydraulic cylinders with T-slot
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor)
  • Superior  precision: 0.05 mm resolution, 0.1 mm repeatability, 0.3 mm linearity, 1 ms  measurement rate
  • Various lengths available from 32 - 256 mm

    Your benefits

  • Maximum flexibility with several different measuring ranges from 32 to 256 mm
  • Drop-in T-slot mounting from above makes assembly easy
  • Selectable installation direction to optimize cabeling
  • Efficient measurement of stroke due to minimal blind zones, increasing machine throughput
  • Simple commissioning due to "in-range" indicator
  • Output signal: analog, 4 - 20 mA current and 0 -10 V (in one sensor) reduces inventory cost by part number reduction
    Features
    Output function: Analog
    Electrical wiring: DC 4-wire
    Teach-in: 0
    Cylinder type: T-slot
    Cylinder types with adapter: Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Dove-tail groove cylinder
    Measuring range: 64 mm 1)
    Длина корпуса: 77 mm
    Analog output (voltage): 0 V ... 10 V
    Analog output (current): 4 mA ... 20 mA
    Enclosure rating: IP 67 2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 4-pin, 0.3 m 1)
    Supply voltage: 15 V DC ... 30 V DC
    EMC: According to EN 60947-5-2 2)
    Load resistance, max.: 500 Ω 3)
    Min. load resistance: 2 kΩ 4)
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса: Plastic
    Output indicator:
    Linearity typ.: 0.3 mm
    Resolution typ.: 0.03 % FSR (max. >= 0.05 mm) 5)
    Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) 6)
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... 70 °C
    Класс защиты: III
    Magnetic field sensitivity, typ.: 3 mT
    Sampling rate typ.: 1 ms
     
     


    Страницы:
    12
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: