At a glance
| 7 drive safety functions: SS1, SS2, SOS, SSM, SLS, SDI, and SBC |
| For all common encoder interfaces |
| Programmable logic |
| Monitoring of up to 10 speed levels and 4 brake ramps |
| Possible to monitor multiple axes |
Your benefits
| Integration into a Flexi Soft system with one software tool and one project file allows quick project planning and commissioning |
| Easy logic development using predefined, modifiable, freely configurable applications |
| Maximum level of integration into higher-level controllers via all common fieldbus systems using gateways |
| Documentation of the entire safety application simplifies machine acceptance and validation |
| Monitoring movements instead of shutting down increases machine productivity |
| Flexibility due to a wide range of drive safety functions |
| Safety-related parameters | |||
| Safety integrity level: | SIL3 (IEC 61508) SILCL3 (EN 62061) |
||
| Category: | Category 4 (EN ISO 13849-1) | ||
| Уровень производительности: | PL e (EN ISO 13849-1) | ||
| PFHd: | EN ISO 13849 | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Safe state in the event of a fault: | The safety-related data is logic 0. | ||
| Functions | |||
| Standstill: |  |
||
| Safe stop 1 (SS1): | |
||
| Safe stop 2 (SS2): | |
||
| Safe operating stop (SOS): | |
||
| Safe speed monitoring (SSM): | |
||
| Safe limited speed (SLS): | |
||
| Safe direction of motion (SDI): | |
||
| Safe brake control (SBC): | |
||
| Mechanical data | |||
| Dimensions (W x H x D): | 22.5 mm x 96.5 mm x 120.8 mm | ||
| Вес: | 120 g | ||
| Electrical data | |||
| Класс защиты: | III (EN 61140) | ||
| Потребляемая мощность: | ≤ 2.5 W 1) | ||
| Output voltage for encoder: | 24 V | ||
| Interfaces | |||
| Тип подключения: | Male connector, Micro D-Sub, 15-pin | ||
| Encoder interface: | A/B incremental encoder, HTL A/B incremental encoder, RS-422 A/B incremental encoder, TTL Sin/Cos encoder SSI encoder |
||
| Интерфейс передачи данных: | Internal bus (FLEXBUS+) | ||
| Данные окуражающей среды | |||
| Protection class housing: | IP 40 (EN 60529) | ||
| Enclosure rating terminals: | IP 20 (EN 60529) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Storage temperature: | -25 °C ... +70 °C | ||
| Air humidity: | 10 % ... 95 %, non-condensing | ||
| Виброустойчивость: | (EN 60068-2-6) | ||