At a glance
| Size M12 |
| Output signal proportional to distance |
| Triple operating distance |
| Analog current and voltage signal in one sensor |
| High level of repeat accuracy |
| No blind spots |
| Operating distance from 0 mm to 6 mm |
Your benefits
| High positioning accuracy |
| High repeatability provides increased machine throughput, less wear and tear, and decreased downtime |
| No blind zone - increases machine throughput and efficiency |
| Current and voltage output in one sensor requires less inventory of maintenance stock, reducing costs |
| Minimal temperature drift provides operational consistency |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M12 x 1 | ||
| Sensing range Sn: | 6 mm | ||
| Assured sensing range Sa: | 4.86 mm | ||
| Installation type: | Quasi-flush | ||
| Output function: | Analog | ||
| Repeatability (Ta not constant): | 0.3 mm 1)2)3) | ||
| Repeatability (Ta constant): | ± 0.01 mm | ||
| Resolution: | ≤ 1 µm | ||
| Enclosure rating: | IP 67 4) | ||
| Тип подключения: | Connector M12, 4-pin 5) | ||
| Механика/электроника | |||
| Supply voltage: | 15 V DC ... 30 V DC | ||
| Пульсации: | ≤ 20 % 1) | ||
| Time delay before availability: | ≤ 50 ms | ||
| Температурный дрейфт: | ± 10 %, ± 5 % 2)3) | ||
| Current consumption, no load: | ≤ 12 mA 4) | ||
| Output current: | 10 mA 5) | ||
| Output voltage: | 0 V ... 10 V | ||
| Output voltage QA1: | S = 0 mm: 0 V/-0 +0,4 V (23 °C), S = 3 mm: +5,2 V/ +-0,4 V (23 °C), S = 6 mm: +10 V/ +-0,4 V (23 °C) | ||
| Bandwidth: | 1,000 Hz 6) | ||
| защита от короткого замыкания: |  |
||
| Защита от обратной полярности: | |
||
| Материал корпуса крышки: | Plastic, PBTP | ||
| Длина корпуса: | 50 mm | ||
| Thread length: | 50 mm | ||
| Материал корпуса: | Metal, Nickel-plated brass | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.47 | ||
| Copper (Cu): | Ca. 0.2 | ||
| Aluminum (Al): | Ca. 0.28 | ||
| Brass (Br): | Ca. 0.35 | ||
| Installation note | |||
| A: | 6 mm | ||
| B: | 30 mm | ||
| C: | 12 mm | ||
| D: | 18 mm | ||
| E: | 2 mm | ||
| F: | 60 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Size M12 |
| Output signal proportional to distance |
| Triple operating distance |
| Analog current and voltage signal in one sensor |
| High level of repeat accuracy |
| No blind spots |
| Operating distance from 0 mm to 6 mm |
Your benefits
| High positioning accuracy |
| High repeatability provides increased machine throughput, less wear and tear, and decreased downtime |
| No blind zone - increases machine throughput and efficiency |
| Current and voltage output in one sensor requires less inventory of maintenance stock, reducing costs |
| Minimal temperature drift provides operational consistency |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M12 x 1 | ||
| Sensing range Sn: | 6 mm | ||
| Assured sensing range Sa: | 4.86 mm | ||
| Installation type: | Quasi-flush | ||
| Output function: | Analog | ||
| Repeatability (Ta not constant): | 0.3 mm 1)2)3) | ||
| Repeatability (Ta constant): | ± 0.01 mm | ||
| Resolution: | ≤ 1 µm | ||
| Enclosure rating: | IP 67 4) | ||
| Тип подключения: | Connector M12, 4-pin 5) | ||
| Механика/электроника | |||
| Supply voltage: | 15 V DC ... 30 V DC | ||
| Пульсации: | ≤ 20 % 1) | ||
| Time delay before availability: | ≤ 50 ms | ||
| Температурный дрейфт: | ± 10 %, ± 5 % 2)3) | ||
| Current consumption, no load: | ≤ 12 mA 4) | ||
| Output current: | 10 5) | ||
| Output voltage: | 0 V ... 10 V | ||
| Output voltage QA1: | S = 0 mm: 0 V/-0 +0,4 V (23 °C), S = 3 mm: +5,2 V/ +-0,4 V (23 °C), S = 6 mm: +10 V/ +-0,4 V (23 °C) | ||
| Bandwidth: | 1,000 Hz 6) | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Материал корпуса: | Metal, Nickel-plated brass | ||
| Материал корпуса крышки: | Plastic, PBTP | ||
| Длина корпуса: | 45 mm | ||
| Thread length: | 29 mm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.47 | ||
| Copper (Cu): | Ca. 0.2 | ||
| Aluminum (Al): | Ca. 0.28 | ||
| Brass (Br): | Ca. 0.35 | ||
| Installation note | |||
| A: | 6 mm | ||
| B: | 18 mm | ||
| C: | 12 mm | ||
| D: | 18 mm | ||
| E: | 2 mm | ||
| F: | 60 mm | ||
| Remark: | Associated graphic see "Installation" | ||