At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable with connector M8, 3-pin, 0.3 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: |  |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Connector M8, 3-pin | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | ± 100 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable, 3-wire, 2 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable with connector M8, 3-pin, 0.3 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Connector M8, 3-pin | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable, 3-wire, 2 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable with connector M8, 3-pin, 0.3 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Connector M8, 3-pin | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable, 3-wire, 2 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable with connector M8, 3-pin, 0.3 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Connector M8, 3-pin | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High switching frequency of 100 Hz |
| Quick and easy sensitivity adjustment via potentiometer |
| Visual alarm in event of short-circuit |
| Reinforced glass-fiber housing |
| Operating temperatures up to +75 °C |
| Sensor can be installed flush in all materials |
| Recess on rear for mounting a cable tie |
| Flush installation in all materials possible |
| Sensing range of up to 8 mm |
Your benefits
| Reliable detection of objects thanks to high switching frequency, even in accelerated production processes |
| Simple and fast sensitivity control for adaptation to prevailing conditions |
| High reliability thanks to rugged, glass-fiber reinforced housing, proven in hard industrial use |
| Minimal installation space requirements thanks to compact design for use in restricted spaces |
| Short installation time and no holes in the container or tank walls thanks to non-contact measurement |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 16 mm x 39.5 mm x 12 mm | ||
| Sensing range Sn: | 8 mm 1) | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 2) | ||
| Тип подключения: | Cable, 3-wire, 2 m 3) | ||
| Регулировки: | Potentiometer, 5 turns , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % | ||
| Падение напряжения: | ≤ 2.5 V DC 1) | ||
| Потребляемая мощность: | ≤ 12 mA 2) | ||
| Time delay before availability: | ≤ 200 ms | ||
| Hysteresis: | 4 % ... 20 % 3) | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 20 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 150 mA | ||
| Материал кабеля: | PVC | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +75 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Материал корпуса крышки: | ABS | ||
| Sensing face material: | Plastic | ||
| UL File No.: | NRKH.E191603 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||