At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 16 mm | ||
| Assured sensing range Sa: | 11.52 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 10 Hz | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | AC 2-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 2-wire, 2 m 2) | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 20 V AC ... 250 V AC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 10 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 500 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.5 mm² | ||
| защита от короткого замыкания: | - | ||
| Защита от обратной полярности: |  |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 63.6 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| B: | 30 mm | ||
| C: | 30 mm | ||
| D: | 48 mm | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 16 mm | ||
| Assured sensing range Sa: | 11.52 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | ± 50 Hz | ||
| Output type: | NPN | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 79 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | ≤ 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| B: | 30 mm | ||
| C: | 30 mm | ||
| D: | 48 mm | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 16 mm | ||
| Assured sensing range Sa: | 11.52 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | NPN | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 4-wire, 2 m 2) | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.34 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 63.6 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| B: | 30 mm | ||
| C: | 30 mm | ||
| D: | 48 mm | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 16 mm | ||
| Assured sensing range Sa: | 11.52 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 79 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| B: | 30 mm | ||
| C: | 30 mm | ||
| D: | 48 mm | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 16 mm | ||
| Assured sensing range Sa: | 11.52 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 4-wire, 2 m 2) | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.34 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 63.6 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| B: | 30 mm | ||
| C: | 30 mm | ||
| D: | 48 mm | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 25 mm | ||
| Assured sensing range Sa: | 18 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 10 Hz | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | AC 2-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 2-wire, 2 m 2) | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 20 V AC ... 250 V AC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 10 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 500 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.5 mm² | ||
| защита от короткого замыкания: | - | ||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 75.6 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| A: | 30 mm | ||
| B: | 60 mm | ||
| C: | 30 mm | ||
| D: | 75 mm | ||
| E: | 50 mm, In critical distances, the sensor should be tested in the application | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 25 mm | ||
| Assured sensing range Sa: | 18 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | NPN | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 91 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| E: | In critical distances, the sensor should be tested in the application | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 25 mm | ||
| Assured sensing range Sa: | 18 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | NPN | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 4-wire, 2 m 2) | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.34 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 75.6 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| E: | In critical distances, the sensor should be tested in the application | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 25 mm | ||
| Assured sensing range Sa: | 18 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 91 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| E: | In critical distances, the sensor should be tested in the application | ||
At a glance
| M30 - cylindrical housing |
| Adjustable sensing range from 2 to 16 mm shielded and 4 to 25 mm unshielded |
| Best-in-class electromagnetic compatibility |
| Short-circuit, reverse polarity, and power-up pulse suppression protection |
| LED status indicator |
| Sensitivity control via potentiometer |
| IP 67 enclosure rating |
| Complementary output function |
Your benefits
| Reliably detect objects at a long sensing distance up to 25 mm (non-flush) |
| Quick and easy adjustment via potentiometer saves installation and setup time |
| Simple, cost-saving detection alternative to photoelectric and inductive sensors in applications such as detecting product in a sealed box, container or tank |
| High EMC immunity prevents false switching, reduces material loss and increases throughput |
| High shock and vibration resistance increases sensor life and reduces maintenance costs |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M30 x 1.5 | ||
| Sensing range Sn: | 25 mm | ||
| Assured sensing range Sa: | 18 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 4-wire, 2 m 2) | ||
| Регулировки: | Potentiometer , Sensitivity |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 4 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.34 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса крышки: | PBT | ||
| Длина корпуса: | 75.6 mm | ||
| Thread length: | 50 mm | ||
| Момент затяжки, Макс.: | 7.5 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
| E: | In critical distances, the sensor should be tested in the application | ||