At a glance
| High electromagnetic compatibility |
| Compact sensor with long sensing range of up to 8 mm |
| Teach-button for teaching in the background and/or the object (also possible via an external cable) |
| Dynamic Teach for teaching in the background and/or the object |
| Automatic detection of NPN output or PNP output load |
| Teach-in procedure allows you to switch between the NO and NC functions |
Your benefits
| Its high electromagnetic compatibility prevents switching errors and increases machine availability |
| Its long sensing range and compact design allow the sensor to be used in a number of different applications |
| The compact sensor design saves installation space |
| Fast sensor configuration possible using Teach-in pushbutton or external control cable |
| The Dynamic Teach function can be used to familiarize the sensor with the object/medium. This enables more reliable detection and thus increases the machine's throughput |
| Less variants (NO/NC, NPN/PNP, flush/non-flush) means that fewer parts need to be stored |
| Since measurements can also be made through the wall of the tank or container, there is no need to drill holes, reducing installation time |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M12 x 1 | ||
| Sensing range Sn: | 8 mm | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush 1) | ||
| Частота переключений: | Ca. 15 Hz | ||
| Output type: | NPN, PNP | ||
| Output function: | Programmable | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 68 2)3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Output characteristic: | Wire configurable | ||
| Регулировки: | Single teach-in button, Sensitivity cable |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 12 mA 3) | ||
| Time delay before availability: | ≤ 120 ms | ||
| Hysteresis: | 3 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: |  |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +85 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Длина корпуса: | 84.7 mm | ||
| Thread length: | 46.5 mm | ||
| Момент затяжки, Макс.: | ≤ 1 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| High electromagnetic compatibility |
| Compact sensor with long sensing range of up to 8 mm |
| Teach-button for teaching in the background and/or the object (also possible via an external cable) |
| Dynamic Teach for teaching in the background and/or the object |
| Automatic detection of NPN output or PNP output load |
| Teach-in procedure allows you to switch between the NO and NC functions |
Your benefits
| Its high electromagnetic compatibility prevents switching errors and increases machine availability |
| Its long sensing range and compact design allow the sensor to be used in a number of different applications |
| The compact sensor design saves installation space |
| Fast sensor configuration possible using Teach-in pushbutton or external control cable |
| The Dynamic Teach function can be used to familiarize the sensor with the object/medium. This enables more reliable detection and thus increases the machine's throughput |
| Less variants (NO/NC, NPN/PNP, flush/non-flush) means that fewer parts need to be stored |
| Since measurements can also be made through the wall of the tank or container, there is no need to drill holes, reducing installation time |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M12 x 1 | ||
| Sensing range Sn: | 8 mm | ||
| Assured sensing range Sa: | 5.76 mm | ||
| Installation type: | Non-flush / flush 1) | ||
| Частота переключений: | Ca. 15 Hz | ||
| Output type: | NPN, PNP | ||
| Output function: | Programmable | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 68 2)3) | ||
| Тип подключения: | Cable, 4-wire, 2 m 4) | ||
| Output characteristic: | Wire configurable | ||
| Регулировки: | Single teach-in button, Sensitivity cable |
||
| Механика/электроника | |||
| Материал корпуса: | Plastic | ||
| Supply voltage: | 10 V DC ... 36 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2.5 V DC 2) | ||
| Потребляемая мощность: | ≤ 12 mA 3) | ||
| Time delay before availability: | ≤ 120 ms | ||
| Hysteresis: | 3 % ... 20 % | ||
| Повторяемость: | ≤ 5 % 4)5) | ||
| EMC: | According to EN 60947-5-2 6) | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.34 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +85 °C | ||
| Температура хранения: | -40 °C ... +85 °C | ||
| Длина корпуса: | 84.7 mm | ||
| Thread length: | 46.5 mm | ||
| Момент затяжки, Макс.: | ≤ 1 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Металлы: | 1 | ||
| Вода: | 1 | ||
| PVC: | Ca. 0.4 | ||
| Масла: | Ca. 0.25 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||