At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 12 V DC ... 30 V DC relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 51.5 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 12 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 40 mA | ||
| Output type: | Relay, SPDT, electrically isolated 3) | ||
| Response time: | ≤ 10 ms | ||
| Тип подключения: | Cable, 5-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.25 mm² | ||
| Защита цепи: | C 5) | ||
| Класс защиты: | II 6) | ||
| Вес: | 115 g | ||
| Поляризационный фильтр: |  |
||
| Interference emission: | EN 61000-6-3 (2011-09) 7) | ||
| Special device: | |
||
| Enclosure rating: | IP 67 | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C 8) | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 20 Hz | ||
| Switching load max. (current/voltage): | 0.11 A (250 V DC), 3 A (250 V AC), 3 A (30 V DC) | ||
| Relay switching cycles min.: | 100.000 cycles (3 A) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 12 V DC ... 30 V DC relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 51.5 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 12 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 40 mA | ||
| Output type: | Relay, SPDT, electrically isolated 3) | ||
| Response time: | ≤ 10 ms | ||
| Тип подключения: | Cable, 5-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.25 mm² | ||
| Защита цепи: | C 5) | ||
| Класс защиты: | II 6) | ||
| Вес: | 115 g | ||
| Поляризационный фильтр: | |
||
| Interference emission: | EN 61000-6-3 (2011-09) 7) | ||
| Special device: | |
||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10UC01, Reflector P250 | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C 8) | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 20 Hz | ||
| Switching load max. (current/voltage): | 0.11 A (250 V DC), 3 A (250 V AC), 3 A (30 V DC) | ||
| Relay switching cycles min.: | 100.000 cycles (3 A) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Режим переключения: | Светлое/темное переключение | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Режим переключения: | Светлое/темное переключение | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Q-Lock mounting system BEF-KHSQ12R01 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 14 m on PL80A reflector |
| Infrared LED |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12.5 m, 0.08 m ... 14 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10.5 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Infrared light | ||
| Источник света: | LED 5) | ||
| Длина волны: | 850 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 154 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | - | ||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Light switching | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 500 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | |
||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Q-Lock mounting system BEF-KHSQ12R01 (2x), Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | |
||
| Enclosure rating: | IP 67 | ||
| Items supplied: | 24 x GL10-P4151 (1069860) | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 1,000 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Light switching | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Light switching | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Q-Lock mounting system BEF-KHSQ12R01 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable with connector M12, 4-pin, 300 mm 4) | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 35 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Special features: | High functional reliability on foil-wrapped objects | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Light switching | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Cable with connector M12, 4-pin 4) | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 500 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 5 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 500 µs 3) | ||
| Тип подключения: | Cable, 3-wire, 5 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 1,000 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 51.5 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 2.5 VA | ||
| Output type: | Relay, SPDT, electrically isolated 3) | ||
| Response time: | ≤ 10 ms | ||
| Тип подключения: | Cable, 5-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.25 mm² | ||
| Защита цепи: | C 5) | ||
| Класс защиты: | II 6) | ||
| Вес: | 115 g | ||
| Поляризационный фильтр: | |
||
| Interference emission: | EN 61000-6-3 (2011-09) 7) | ||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C 8) | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 20 Hz | ||
| Switching load max. (current/voltage): | 0.11 A (250 V DC), 3 A (250 V AC), 3 A (30 V DC) | ||
| Relay switching cycles min.: | 100.000 cycles (3 A) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 51.5 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 2.5 VA | ||
| Output type: | Relay, SPDT, electrically isolated 3) | ||
| Response time: | ≤ 10 ms | ||
| Тип подключения: | Cable, 5-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.25 mm² | ||
| Защита цепи: | C 5) | ||
| Класс защиты: | II 6) | ||
| Вес: | 115 g | ||
| Поляризационный фильтр: | |
||
| Interference emission: | EN 61000-6-3 (2011-09) 7) | ||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10UC01, Reflector P250 | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C 8) | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 20 Hz | ||
| Switching load max. (current/voltage): | 0.11 A (250 V DC), 3 A (250 V AC), 3 A (30 V DC) | ||
| Relay switching cycles min.: | 100.000 cycles (3 A) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 51.5 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 2.5 VA | ||
| Output type: | Relay, SPDT, electrically isolated 3) | ||
| Response time: | ≤ 10 ms | ||
| Тип подключения: | Cable, 5-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.25 mm² | ||
| Защита цепи: | C 5) | ||
| Класс защиты: | II 6) | ||
| Вес: | 115 g | ||
| Поляризационный фильтр: | |
||
| Interference emission: | EN 61000-6-3 (2011-09) 7) | ||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C 8) | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 20 Hz | ||
| Switching load max. (current/voltage): | 0.11 A (250 V DC), 3 A (250 V AC), 3 A (30 V DC) | ||
| Relay switching cycles min.: | 100.000 cycles (3 A) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Long sensing ranges: up to 15 m on PL80A reflector |
| PinPoint LED with bright and precise light spot |
| Immunity to ambient light |
| 10 V DC ... 30 V DC or 24 V AC/DC … 240 V AC/DC power supply with PNP/NPN or relay output |
| With or without sensitivity adjustment |
| Small housing design |
| Rugged sensor housing with metal-reinforced holes for assembly |
| Q-Lock assembly system for mounting and aligning the sensor within a few seconds |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Efficient installation: the GL10 and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Universal DC or AC/DC power supply for even greater application flexibility |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 51.5 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.08 m ... 12 m, 0.08 m ... 15 m 1)2) | ||
| Диапазон измерений: | 0.15 m ... 10 m, 0.15 m ... 12 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 2.5 VA | ||
| Output type: | Relay, SPDT, electrically isolated 3) | ||
| Response time: | ≤ 10 ms | ||
| Тип подключения: | Cable, 5-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.25 mm² | ||
| Защита цепи: | C 5) | ||
| Класс защиты: | II 6) | ||
| Вес: | 115 g | ||
| Поляризационный фильтр: | |
||
| Interference emission: | EN 61000-6-3 (2011-09) 7) | ||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10UC01, Reflector P250 | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C 8) | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 20 Hz | ||
| Switching load max. (current/voltage): | 0.11 A (250 V DC), 3 A (250 V AC), 3 A (30 V DC) | ||
| Relay switching cycles min.: | 100.000 cycles (3 A) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Logistics: Storage & Conveyor, especially pallet detection |
| Machine builders (e.g. packaging, handling, wood processing, paper) |
| Automotive |
| Automated car park systems |
| Doors and gates |
| Distribution |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Reliable detection of transparent objects |
| Efficient installation: the GL10G and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 500 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Logistics: Storage & Conveyor, especially pallet detection |
| Machine builders (e.g. packaging, handling, wood processing, paper) |
| Automotive |
| Automated car park systems |
| Doors and gates |
| Distribution |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Reliable detection of transparent objects |
| Efficient installation: the GL10G and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Cable, 3-wire, 2 m 4) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Защита цепи: | A, B, C, D 5)6)7)8) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 9) | ||
| Switching frequency max.: | 500 Hz 10) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Logistics: Storage & Conveyor, especially pallet detection |
| Machine builders (e.g. packaging, handling, wood processing, paper) |
| Automotive |
| Automated car park systems |
| Doors and gates |
| Distribution |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Reliable detection of transparent objects |
| Efficient installation: the GL10G and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||
At a glance
| Logistics: Storage & Conveyor, especially pallet detection |
| Machine builders (e.g. packaging, handling, wood processing, paper) |
| Automotive |
| Automated car park systems |
| Doors and gates |
| Distribution |
Your benefits
| Long sensing ranges for maximum operating reserves |
| Reliable detection of transparent objects |
| Efficient installation: the GL10G and the Q-Lock assembly system save valuable hours when mounting and commissioning multiple sensors |
| Highly reliable and durable despite optical interference or mechanical loads |
| Wide range of accessories simplifies sensor integration: aids for assembly, connecting cables, and reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
| Dimensions (W x H x D): | 20 mm x 50 mm x 39 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0.15 m ... 10 m, 0.15 m ... 12 m 1)2) | ||
| Диапазон измерений: | 0.3 m ... 8 m, 0.3 m ... 9.5 m 3)4) | ||
| Type of light: | Visible red light | ||
| Источник света: | PinPoint LED 5) | ||
| Длина волны: | 625 nm | ||
| Регулировки: | Potentiometer, 270 ° | ||
| Light spot size (distance): | Ø 58 mm (5 m) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ± 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Выбирается с помощью селектора Светлое/темное | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 1 ms 3) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Защита цепи: | A, B, C, D 4)5)6)7) | ||
| Класс защиты: | III | ||
| Вес: | 90 g | ||
| Поляризационный фильтр: | |
||
| Special device: | - | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | Mounting bracket BEF-G10DC01, Reflector P250 | ||
| EMC: | EN 60947-5-2 | ||
| Ambient operating temperature: | -30 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Further standards: | UL325 8) | ||
| Switching frequency max.: | 500 Hz 9) | ||
| Материал корпуса: | PVC / PMMA, Plastic | ||