At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: |  |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 1,200 mm | ||
| Resolution: | 30 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 19 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 1,200 mm | ||
| Resolution: | 30 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 19 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 600 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 600 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 1,500 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 1,500 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 300 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 300 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 600 mm | ||
| Resolution: | 30 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 19 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 600 mm | ||
| Resolution: | 30 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 19 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 1,050 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 1,050 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 1,800 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 1,800 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
At a glance
| Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849) |
| ATEXÂ IIÂ 3G/3D (2/22 zones) |
| 7-segment display |
| Beam coding for correct system allocation |
| Configuration and diagnostics via PC |
| External device monitoring (EDM) and restart interlock (RES) |
| Accessory Clone Plug - for configuration memory |
| Labelling Gas: Ex nA op is IIC T4 0°C |
| Labelling Dust: Ex tD A22 IP65 T123°C X |
Your benefits
| ATEX II 3G/3D for use in 2/22 zones |
| Large scanning ranges up to 19 m and sufficient power reserve for use in paint finishing lines, for example |
| 7-segment display saves time during alignment and diagnostics |
| Beam coding protects the systems against opticalinterference by ensuring a high level of availability |
| Preconfigured light curtains and the clone plug enables easy and rapid commissioning |
| Precise, convenient configuration and diagnostics reduces downtime |
| Functions-Sender | |||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Functions-Receiver | |||
| Блокировка перезапуска: | |
||
| External device monitoring (EDM): | |
||
| Кодирование лучей: | |
||
| Метод конфигурации: | PC with CDS (Configuration and Diagnostic Software) | ||
| Safe SICK device communication via EFI/SDL: | |
||
| Technical Data-Sender | |||
| Protective field height: | 1,200 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Длина волны: | 950 nm | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||
| Technical Data-Receiver | |||
| Protective field height: | 1,200 mm | ||
| Resolution: | 14 mm | ||
| Диапазон сканирования от ... до: | 0 m ... 8 m | ||
| Type: | Type 4 (IEC 61496) | ||
| Category: | category 4 (EN ISO 13849) | ||
| Уровень производительности: | EN ISO 13849 | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | ||
| Длина волны: | 950 nm | ||
| Тип подключения: | Hirschmann male connector M26, 12-pin | ||
| Connection type configuration connection: | female connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Enclosure rating: | IP 65 (EN 60529) | ||
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | ||
| Частота колебаний от ... до: | 10 Hz ... 55 Hz | ||
| Ударопрочность: | 16 g (IEC 60068-2-29) | ||