At a glance
Variants fulfill the requirements of ATEX categories 1D, 1G and 3D, 3G |
Combination screw for quick mounting |
Enclosure rating: IPÂ 67 |
Very short sensor housing for use in short stroke cylinders |
Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter |
Your benefits
Optimum explosion protection: NAMUR version for ATEX category 1D, 1G |
Quick and easy mounting using Allen wrench or flat head screwdriver |
Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps |
Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot |
Features | |||
Switching frequency, typ.: | 1,000 Hz | ||
Output type: | According NAMUR EN 60947-5-6. Using of isolated switch amplifier with certificates of conformity for explosion areas is recommended(U ≤ 20 V; I ≤ 60 mA; P ≤ 100 mW), NAMUR | ||
Electrical wiring: | DC 2-wire | ||
Cylinder type: | T-slot | ||
Cylinder types with adapter: | Profile cylinder Round body cylinder SMC rail CDQ2 SMC rail ECDQ2 Tie rod cylinder Dove-tail groove cylinder |
||
Длина корпуса: | 24 mm | ||
Enclosure rating: | IP 67 1) |
Механика/электроника | |||
Тип подключения: | Cable with connector M8, 2-pin, with knurled nuts, 0.5 m | ||
Supply voltage: | 8.2 V DC ... 20 V DC 1) | ||
Потребляемая мощность: | ≤ 10 mA 2) | ||
Падение напряжения: | ≤ 2.2 V | ||
Непрерывный ток Ia: | ≤ 60 mA | ||
EMC: | According to EN 60947-5-2 | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.12 mm² | ||
Защита от обратной полярности: | |||
защита от короткого замыкания: | |||
Материал корпуса крышки: | PA12 | ||
Device labeling: | II 1D Ex ia IIIC T135 °C Da, II 1G Ex ia IIC T4 Ga | ||
Импульсная защита: | |||
Повторяемость: | ≤ 0.1 mT 3) | ||
Overrun distance, typ.: | 9 mm | ||
Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
Ambient operating temperature: | -25 °C ... +80 °C | ||
Ex area category: | 1D, 1G | ||
Hysteresis, typ.: | ≤ 0.5 mT | ||
Response sensitivity, typ.: | 2.8 mT | ||
Материал корпуса: | Plastic | ||
UL File No.: | NRKH.E181493 |