Страницы:
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 25 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: |  |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 50 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 75 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 100 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 150 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 200 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 25 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 40 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 50 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 40 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 75 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 40 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 100 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 40 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 150 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 40 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 200 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 40 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 25 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 50 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 75 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 100 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 150 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Hygienic process connections |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 4.7 s response time t90: ≤ 12.2 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 200 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 16 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Angled pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Angled pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 42.4 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Straight pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Straight pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 42.4 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Angled pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Straight pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Spare sensor without process connection | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Angled pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Straight pipe (DIN EN ISO 1127 and DIN 11866), row B, for welding | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| In-line housing for orbital welding in pipe |
| Sensor probe spring-loaded in thermowell |
| Wetted parts: Corrosion-resistant |
| stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Engineered for installation in a pipe, the integrated design provides the optimal solution to this type of measurement |
| The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks |
| Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a design with minimum of dead space |
| Rugged: Connection housing is easily cleaned and splash water proof |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.2 s response time t90: ≤ 7.3 s 1) |
||
| Механика/электроника | |||
| Process connection: | Spare sensor without process connection | ||
| Nominal width: | NW 21.3 | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | Max. 25 bar at room temperature | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 25 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 40 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 50 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 40 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 75 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 40 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 100 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 40 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 150 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 40 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 200 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 40 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 25 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 16 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 50 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 16 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 75 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 16 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 100 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 16 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 150 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 16 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Signal output and maximum ohmic load RA: | 4 mA ... 20 mA, 2-wire (RA ≤ (L+ - 10 V) / 0.023 A [Ohm]) | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Tri-clamp 1'', 1 ½'' | ||
| Insertion length/diameter of probe: | 200 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III Reverse polarity protection: L+ towards M |
||
| Supply voltage: | 10 V DC ... 35 V DC | ||
| Protection class III: | |
||
| CE-conformity: | 2004/108/EC, EN 61326-2-3 | ||
| Pressure resistance: | max. 16 bar | ||
| Maximum power consumption: | Ca. 30 mA | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 25 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | max. 40 bar | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 50 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | max. 40 bar | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 75 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | max. 40 bar | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 100 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | max. 40 bar | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
At a glance
| Pt100 element, accuracy class A (IEC 60751) |
| Measuring ranges -50 °C ... +150 °C and -50 °C … +250 °C |
| Wetted parts: Corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm |
| Various hygienic process connections and insertion lengths |
| Pt100 (4-wire) or 4 mA … 20 mA (2-wire) |
| Round connector M12 x 1 |
Your benefits
| Convenient system integration – installation in narrow installation space possible through compact dimensions |
| Safe, hygienic operation due to wetted parts made from high-grade stainless steel, hygienically-graded surface finish and a gap- and crevice-free design |
| Rugged: Connection housing is easily cleaned and splash proof |
| Quick and safe installation |
| Very good long-term stability, accuracy and linearity |
| Quick response time |
| Optimal solutions for individual requirements due to versatile configurability |
| Features | |||
| Measuring range: | -50 °C ... 150 °C | ||
| Чувствительный элемент: | Pt100 | ||
| Output signal: | Pt100, 4-wire | ||
| Performance | |||
| Accuracy of sensor element: | Class A according to IEC 60751 | ||
| Transmitter accuracy: | ≤ ± 0.2 % of span | ||
| Transmitter linearity: | ≤ ± 0.1 % of span | ||
| Response time: | Response time t50: ≤ 3.3 s response time t90: ≤ 9.7 s 1) |
||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Insertion length/diameter of probe: | 150 mm / 6 mm | ||
| Материал корпуса: | Stainless steel 1.4571 (316Ti) | ||
| Детали, контактирующие с измеряемой средой: | stainless steel 1.4435 (316L), Ra ≤ 0.8 µm | ||
| Electrical connection/enclosure rating 1): | Round connector M12 x 1, 4-pin / IP 68 and IP 69K | ||
| Measuring current: | 0.3 mA ... 1 mA | ||
| Electrical safety: | Dielectric strength: 500 V AC Protection class: III |
||
| Protection class III: | |
||
| Pressure resistance: | max. 40 bar | ||
| Данные окуражающей среды | |||
| Ambient temperature: | -40 °C ... 85 °C | ||
| Storage and transport temperature: | -40 °C ... 85 °C | ||
| Vibration resistance according to IEC 60751: | 3 g | ||
| Ударопрочность: | According to IEC 60751 | ||
| Relative humidity: | ≤ 95 % | ||
Страницы: