Страницы:
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 2.5 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 1 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
 1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Tri-Clamp 1 ½'' | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 320 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 2.5 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 2 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Tri-Clamp 1 ½'' | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 5-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 570 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 2.5 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | IO-Link/PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Tri-Clamp 1 ½'' | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 170 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 1 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 320 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 2 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 5-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 570 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | IO-Link/PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Conical coupling (DIN 11851) DN 40 with union nut | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 170 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +125 °C, +150 °C for max. 1 h 1) | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 1 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | G 1 hygienic flush-mounted | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Wetted parts: EPDM, Not wetted parts: EPDM | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 320 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +125 °C, +150 °C for max. 1 h 1) | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 2 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | G 1 hygienic flush-mounted | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Wetted parts: EPDM, Not wetted parts: EPDM | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 5-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 570 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +125 °C, +150 °C for max. 1 h 1) | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | IO-Link/PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | G 1 hygienic flush-mounted | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Wetted parts: EPDM, Not wetted parts: EPDM | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 170 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 1 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Tri-Clamp 1 ½'' | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 320 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | 2 x PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Tri-Clamp 1 ½'' | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 5-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 570 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Hygienically-graded pressure switch with display for the food and beverage industry |
| Wetted parts are made from stainless steel 1.4435 |
| Individually programmable switching outputs and analog output |
| Pressure values are indicated on the display |
| Unit of pressure value in the display can be switched |
| Output states are indicated separately via large LEDs |
Your benefits
| Safe hygienic operation due to flush-mounted, highly resistant stainless steel membrane and hygienic process connections |
| Suitability for CIP and SIP ensures high system availability |
| Safe and easy setup with three large pushbuttons and legible, rotatable display |
| Rotatable housing for optimum cable routing |
| Wide range of available configurations enable customer-specific solutions |
| High reliability: Corrosion-resistant design of wetted parts and housing with IP 65 and IP 67 enclosure ratings |
| Ultimate system availability: IO-Link enables fast, reliable parameter setting when changing over products |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | -20 °C ... +100 °C, +135 °C for max. 1 h | ||
| Display: | 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: ≤ 1 % of span ± 1 digit | ||
| Output signal: | IO-Link/PNP + 4 mA ... 20 mA | ||
| Rotatable housing: | Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° | ||
| Maximum ohmic load RA: | ≤ 0.5 kΩ | ||
| Gauge pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Overpressure safety: | 2-fold | ||
| Zero point adjustment: | Max. + 3 % of span | ||
| Средний: | Liquid and gaseous media | ||
| EHEDG approval: |
1)
|
||
| Performance | |||
| Accuracy: | ≤ ± 1 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Setting accuracy of switching outputs: | ≤ ± 0.5 % of span | ||
| Response time: | 3 ms | ||
| Long-term drift/one-year stability: | ≤ ± 0.2 % of span according to IEC 61298-2 | ||
| Номинальный температурный коэффициент в диапазоне температур: | Typical TC of zero: In the temperature range 0 °C ... 20 °C: 0.7 % of span / 10 K. In the temperature range 20 °C … 80 °C: 0.2 % of span / 10 K. typical TC of span: In the temperature range 0 °C … 80 °C: 0.1 % of the span / 10 K | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Механика/электроника | |||
| Process connection: | Tri-Clamp 1 ½'' | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 1.4435 / 316L | ||
| Seal: | Without seal | ||
| Материал корпуса: | Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 | ||
| Enclosure rating: | IP 65 / IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin | ||
| Потребляемая мощность: | Max. 70 mA | ||
| Electrical safety: | Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Internal transmission fluid: | Medical white oil, FDA compliant according to CFR 172.878 and 21 CFR 178.3620(a), compliant to USP, EP, and JP | ||
| Total current consumption: | Max. 170 mA (incl. switching current) | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | EMC directive: 2004/108/EC, EN 61326-2-3 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | -20 °C ... +80 °C | ||
| Shock load: | 50 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance) | ||
| Relative humidity: | 45 % ... 75 % | ||
Страницы: