At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 117 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: |  |
||
| ATEX approval: | ATEX II 1G, II 1/2G, II 2G Ex ia IIC T6 Ga, Ga/Gb, Gb | ||
| GOST approval: | |
||
| Fill material density: | 0.5 g/cm3 ... 2.5 g/cm³ | ||
| Type examination: | TÃœV 09 ATEX 372528 X | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | ≤ 1 mm | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Plastic | ||
| Process connection: | G ¾ A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 / IP 67 | ||
| Supply voltage: | NAMUR signal: 4.5 V DC ... 12 V DC | ||
| VDE protection class 1: | - | ||
| VDE protection class 2: | |
||
| Время инициализации: | |||
| Hysteresis: | 2 mm | ||
| Output current: | 1 mA / 2,5 mA | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | |
||
| ATEX approval: | ATEX II 1G, II 1/2G, II 2G Ex ia IIC T6 Ga, Ga/Gb, Gb | ||
| GOST approval: | |
||
| Fill material density: | 0.5 g/cm3 ... 2.5 g/cm³ | ||
| Type examination: | TÃœV 09 ATEX 372528 X | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | ≤ 1 mm | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Plastic | ||
| Process connection: | G ¾ A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 / IP 67 | ||
| Supply voltage: | NAMUR signal: 4.5 V DC ... 12 V DC | ||
| VDE protection class 1: | - | ||
| VDE protection class 2: | |
||
| Время инициализации: | |||
| Hysteresis: | 2 mm | ||
| Output current: | 1 mA / 2,5 mA | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 117 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | |
||
| ATEX approval: | ATEX II 1/2G, 2G Ex d IIC T6 | ||
| GOST approval: | |
||
| Fill material density: | 0.5 g/cm3 ... 2.5 g/cm³ | ||
| Type examination: | TÃœV 09 ATEX 372527 X | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | ≤ 1 mm | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Aluminum | ||
| Process connection: | G 1 A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 / IP 67 | ||
| Supply voltage: | Transistor output PNP/ NPN: 10 V DC ... 55 V DC | ||
| Пульсации: | ≤ 5 Vpp | ||
| Потребляемая мощность: | |||
| VDE protection class 1: | - | ||
| VDE protection class 2: | |
||
| Время инициализации: | |||
| Hysteresis: | 2 mm | ||
| Output current: | |||
| Сигнал Высокого напряжения: | Uv - 3 V | ||
| Signal voltage LOW: | |||
| Capacitive load: | 100 nF | ||
| Inductive load: | ≤ 1 H | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | |
||
| ATEX approval: | ATEX II 1/2G, 2G Ex d IIC T6 | ||
| GOST approval: | |
||
| Fill material density: | 0.5 g/cm3 ... 2.5 g/cm³ | ||
| Type examination: | TÃœV 09 ATEX 372527 X | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | ≤ 1 mm | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Aluminum | ||
| Process connection: | G 1 A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 / IP 67 | ||
| Supply voltage: | Transistor output PNP/ NPN: 10 V DC ... 55 V DC | ||
| Пульсации: | ≤ 5 Vpp | ||
| Потребляемая мощность: | |||
| VDE protection class 1: | - | ||
| VDE protection class 2: | |
||
| Время инициализации: | |||
| Hysteresis: | 2 mm | ||
| Output current: | |||
| Сигнал Высокого напряжения: | Uv - 3 V | ||
| Signal voltage LOW: | |||
| Capacitive load: | 100 nF | ||
| Inductive load: | ≤ 1 H | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | |
||
| ATEX approval: | ATEX II 1/2G, 2G Ex d IIC T6 | ||
| GOST approval: | |
||
| Fill material density: | 0.5 g/cm3 ... 2.5 g/cm³ | ||
| Type examination: | TÃœV 09 ATEX 372527 X | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | ≤ 1 mm | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Aluminum | ||
| Process connection: | G ¾ A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 / IP 67 | ||
| Supply voltage: | Contactless electronic switch: 20 V AC/DC ... 253 V AC/DC | ||
| Потребляемая мощность: | |||
| VDE protection class 1: | |
||
| VDE protection class 2: | - | ||
| Время инициализации: | |||
| Hysteresis: | 2 mm | ||
| Output current: | |||
| Capacitive load: | 100 nF | ||
| Inductive load: | ≤ 1 H | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | |
||
| ATEX approval: | ATEX II 1/2G, 2G Ex d IIC T6 | ||
| GOST approval: | |
||
| Fill material density: | 0.5 g/cm3 ... 2.5 g/cm³ | ||
| Type examination: | TÃœV 09 ATEX 372527 X | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | ≤ 1 mm | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Aluminum | ||
| Process connection: | ¾" NPT PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 / IP 67 | ||
| Supply voltage: | Transistor output PNP/ NPN: 10 V DC ... 55 V DC | ||
| Пульсации: | ≤ 5 Vpp | ||
| Потребляемая мощность: | |||
| VDE protection class 1: | - | ||
| VDE protection class 2: | |
||
| Время инициализации: | |||
| Hysteresis: | 2 mm | ||
| Output current: | |||
| Сигнал Высокого напряжения: | Uv - 3 V | ||
| Signal voltage LOW: | |||
| Capacitive load: | 100 nF | ||
| Inductive load: | ≤ 1 H | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | - | ||
| ATEX certification: | - | ||
| Ship approval: | - | ||
| Fill material density: | 0.5 ... 2.5 | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | 1 | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Stainless steel (electropolished) 316L | ||
| Process connection: | Triclamp 2'' (PN 16, 316L, Ra | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 | ||
| Потребляемая мощность: | 5 mA ... 30 mA | ||
| Класс защиты: | 0, 1 | ||
| Время инициализации: | 2 s | ||
| Output signal: | Double relay (DPDT): 20 V DC ... 72 V DC / 20 ... 253 V AC | ||
| Hysteresis: | 2 mm | ||
| Output current: | > 10 UA, 3A AC, 1A DC | ||
| Capacitive load: | 750 VA 54 W | ||
| Inductive load: | 750 VA 54 W | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | - | ||
| ATEX certification: | - | ||
| Ship approval: | - | ||
| Fill material density: | 0.5 ... 2.5 | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | 1 | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Plastic | ||
| Process connection: | Triclamp 2'' (PN 16, 316L, Ra | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 | ||
| Потребляемая мощность: | 5 mA ... 30 mA | ||
| Класс защиты: | 0, 1 | ||
| Время инициализации: | 2 s | ||
| Output signal: | Double relay (DPDT): 20 V DC ... 72 V DC / 20 ... 253 V AC | ||
| Hysteresis: | 2 mm | ||
| Output current: | > 10 UA, 3A AC, 1A DC | ||
| Capacitive load: | 750 VA 54 W | ||
| Inductive load: | 750 VA 54 W | ||
| Тип подключения: | ½" NPT | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | - | ||
| ATEX certification: | - | ||
| Ship approval: | - | ||
| Fill material density: | 0.5 ... 2.5 | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | 1 | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Plastic | ||
| Process connection: | G 1 A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 | ||
| Потребляемая мощность: | 5 mA ... 30 mA | ||
| Класс защиты: | 0, 1 | ||
| Время инициализации: | 2 s | ||
| Output signal: | Double relay (DPDT): 20 V DC ... 72 V DC / 20 ... 253 V AC | ||
| Hysteresis: | 2 mm | ||
| Output current: | > 10 UA, 3A AC, 1A DC | ||
| Capacitive load: | 750 VA 54 W | ||
| Inductive load: | 750 VA 54 W | ||
| Тип подключения: | ½" NPT | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | - | ||
| ATEX certification: | - | ||
| Ship approval: | - | ||
| Fill material density: | 0.5 ... 2.5 | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | 1 | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Plastic | ||
| Process connection: | G 1 A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 | ||
| Потребляемая мощность: | 5 mA ... 30 mA | ||
| Класс защиты: | 0, 1 | ||
| Время инициализации: | 2 s | ||
| Output signal: | Double relay (DPDT): 20 V DC ... 72 V DC / 20 ... 253 V AC | ||
| Hysteresis: | 2 mm | ||
| Output current: | > 10 UA, 3A AC, 1A DC | ||
| Capacitive load: | 750 VA 54 W | ||
| Inductive load: | 750 VA 54 W | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | - | ||
| ATEX certification: | - | ||
| Ship approval: | - | ||
| Fill material density: | 0.5 ... 2.5 | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | 1 | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Stainless steel (casted) 316L | ||
| Process connection: | G 3/4 A PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 | ||
| Потребляемая мощность: | 5 mA ... 30 mA | ||
| Класс защиты: | 0, 1 | ||
| Время инициализации: | 2 s | ||
| Output signal: | Double relay (DPDT): 20 V DC ... 72 V DC / 20 ... 253 V AC | ||
| Hysteresis: | 2 mm | ||
| Output current: | > 10 UA, 3A AC, 1A DC | ||
| Capacitive load: | 750 VA 54 W | ||
| Inductive load: | 750 VA 54 W | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||
At a glance
| Several housing materials and electrical outputs available |
| Commissioning without filling |
| Process temperature up to 250 °C |
| Immune to deposit formation |
| Very high repeatability |
| Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant |
| ATEX and marine certifications available |
Your benefits
| Easy installation and commissioning, no calibration necessary |
| Easy operation and integration, saves time |
| Maintenance-free sensor, reduces downtime |
| Testing in place possible - no mounting required, which reduces installation time |
| Flexible and tough system for a multitude of applications |
| Universal technology works in all kinds of liquids |
| Features | |||
| Средний: | Fluids | ||
| Measurement: | Switch | ||
| Длина зонда: | 66 mm | ||
| Давление процесса: | -1 bar ... 64 bar | ||
| Температура процесса: | -50 °C ... 150 °C | ||
| WHG approval: | - | ||
| ATEX certification: | - | ||
| Ship approval: | - | ||
| Fill material density: | 0.5 ... 2.5 | ||
| Performance | |||
| Accuracy of sensor element: | ± 2 mm | ||
| Повторяемость: | 1 | ||
| Viscosity: | 0.1 mPas ... 10,000 mPas | ||
| Response time: | 500 ms | ||
| Mechanical data | |||
| Материал корпуса: | Plastic | ||
| Process connection: | 1" NPT PN 64 | ||
| Детали, контактирующие с измеряемой средой: | Stainless steel 316L (optional Ra ≤ 0.8 µm) | ||
| Sensor material: | Stainless steel 1.4404 | ||
| Electrical data | |||
| Температурный дрейф: | 0,03 mm/K | ||
| Enclosure rating: | IP 66 | ||
| Потребляемая мощность: | 5 mA ... 30 mA | ||
| Класс защиты: | 0, 1 | ||
| Время инициализации: | 2 s | ||
| Output signal: | Double relay (DPDT): 20 V DC ... 72 V DC / 20 ... 253 V AC | ||
| Hysteresis: | 2 mm | ||
| Output current: | > 10 UA, 3A AC, 1A DC | ||
| Capacitive load: | 750 VA 54 W | ||
| Inductive load: | 750 VA 54 W | ||
| Тип подключения: | M20 x 1.5 | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -40 °C ... 70 °C | ||
| Температура хранения: | -40 °C ... 80 °C | ||