+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

LFV230

 
 
Арт. 6043956

At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 300 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043957

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 400 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043958

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 500 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043959

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 600 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043960

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 700 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043961

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 800 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043962

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 900 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043963

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,000 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043964

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,100 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043965

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,200 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043966

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,300 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043967

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,400 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043968

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,500 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043969

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,600 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043970

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,700 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043971

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,800 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043972

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,900 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043973

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 2,000 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043974

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 2,100 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043975

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 2,200 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043976

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 2,300 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043977

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 2,400 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043978

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 2,500 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044468

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 140 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044405

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 128 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043005

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 80 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043006

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 150 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043406

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 200 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043407

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 1,000 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042730

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 500 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 2'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042731

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 800 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 2'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042599

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 80 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Conical coupling DN 25 acc. to DIN 11851 withunion nut (PN 40, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044526

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 130 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044066

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 200 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043453

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 300 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044380

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 600 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043182

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 80 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043602

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 120 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044007

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 300 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042265

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 400 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044008

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 500 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042999

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 80 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043000

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 150 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6043515

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 250 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042997

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 128 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: 1" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042915

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 6 m

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
  • Economical solution for vertical mounting, reduces costs
  • Vertical mounting protects against leaks
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 130 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: 1" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: