+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

LFV200

 
 
Арт. 6050781

At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 117 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    EHEDG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6038936

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6038676

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6054121

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ½ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 1:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6050754

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ½ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6054120

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ½ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6053354

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: ½'' NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042041

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042042

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042562

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 117 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6041094

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6049721

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Authorizations: WHG approval
    WHG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: 1" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6037335

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    EHEDG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 1:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6050570

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 117 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    EHEDG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 1:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6048090

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 117 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    EHEDG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6039773

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    EHEDG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6051528

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 117 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    EHEDG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 1'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6040876

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    EHEDG approval:
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: Triclamp 2'' (PN 16, 316L, Ra
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6037759

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 10 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6039203

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6051048

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 1:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6039206

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6044784

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6048866

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ½ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 1:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6048704

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ½ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 10 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6049356

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ½ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 10 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6040875

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: 1" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6049944

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: 1" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6048611

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: ¾" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6048865

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: ½'' NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 1:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6048864

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: ½'' NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность: ≤ 10 mA
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6049697

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +100 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: ½'' NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6040914

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6040901

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G 1 A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042248

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 20 V AC/DC ... 253 V AC/DC
    Потребляемая мощность: ≤ 4.2 mA
    VDE protection class 1:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6040915

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6042540

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ¾ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6052475

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: G ½ A PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 67
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Round connector M12 x 1, 4-pin
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6045254

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 115 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: 1" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
    Арт. 6041692

    At a glance

  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions according to EHEDG and FDA available, CIP and SIP resistant

    Your benefits

  • Easy installation and commissioning, no calibration necessary
  • Easy operation and integration, saves time
  • Maintenance-free sensor, reduces downtime
  • Testing in place possible - no mounting required, which reduces installation time
  • Flexible and robust system for a multitude of applications
  • Universal technology works in all kinds of liquids
    Features
    Средний: Fluids
    Measurement: Switch
    Длина зонда: 38 mm
    Давление процесса: -1 bar ... 64 bar
    Температура процесса: -40 °C ... +150 °C
    Silicon free: -
    Fill material density: ≥ 0.7 g/cm3
    Performance
    Resolution: ≤ 1 mm
    Accuracy of sensor element: ± 2 mm
    Повторяемость: ≤ 1 mm
    Viscosity: 0.1 mPas ... 10,000 mPas
    Response time: 500 ms
    Mechanical data
    Материал корпуса: Stainless steel 1.4404, PEI
    Process connection: ¾" NPT PN 64
    Детали, контактирующие с измеряемой средой: 316L (optional Ra
    Electrical data
    Температурный дрейф: 0,03 mm/K
    Enclosure rating: IP 65
    Supply voltage: 10 V DC ... 55 V DC
    Пульсации: ≤ 5 Vpp
    Потребляемая мощность:
    VDE protection class 2:
    Время инициализации:
    Hysteresis: 2 mm
    Output current:
    Сигнал Высокого напряжения: Vs -
    Signal voltage LOW: 0 V +- 1 V
    Capacitive load: 100 nF
    Inductive load: ≤ 1 H
    Тип подключения: Valve plug DIN 43650
    Данные окуражающей среды
    Ambient operating temperature: -40 °C ... +70 °C
    Температура хранения: -40 °C ... +80 °C
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: