Страницы:
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, TTL/RS422, Cable, 8-pin, universal, 3 m | ||
| Тип подключения: | Cable, 8-wire, universal, 3 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 3,600 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, TTL/RS422, Cable, 8-pin, universal, 3 m | ||
| Тип подключения: | Cable, 8-wire, universal, 3 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.08 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 20 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.08 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 30 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.08 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 50 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 125 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 150 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 256 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 300 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 400 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 500 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 4,096 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 8,192 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.08 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 9 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 400 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 2,540 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 3,600 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 4,096 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 8,192 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.08 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 50 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 250 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 360 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 2,500 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 4,096 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 40 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 3 m | ||
| Тип подключения: | Cable, 8-wire, universal, 3 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 500 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 3 m | ||
| Тип подключения: | Cable, 8-wire, universal, 3 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 3 m | ||
| Тип подключения: | Cable, 8-wire, universal, 3 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 3 m | ||
| Тип подключения: | Cable, 8-wire, universal, 3 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 3 m | ||
| Тип подключения: | Cable, 8-wire, universal, 3 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 800 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 3,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 40 ms | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 32 V, HTL/Push pull, Cable, 8-pin, universal, 5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 10 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.5 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | Electronically/number of lines | ||
| Время инициализации: | 30 ms, 32 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 4.5 V ... 32 V, TTL/HTL programmable, 0-SET, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 4.5 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.7 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 30 ms, 32 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 4.5 V ... 32 V, TTL/HTL programmable, Connector M23, 12-pin, radial | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 4.5 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.7 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 30 ms, 32 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 4.5 V ... 32 V, TTL/HTL programmable, Connector M12, 8-pin, radial | ||
| Тип подключения: | Male connector M12, 8-pin, radial | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 4.5 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.7 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 1) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
At a glance
| Compact installation depth |
| High resolution up to 16 bits |
| Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses |
| Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial |
| Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull |
| Mechanical interfaces: face mount or servo flange, blind or through hollow shaft |
| Remote zero set possible |
Your benefits
| Reduced storage costs and downtime due to customer-specific programming |
| Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation |
| Excellent concentricity even at high speeds |
| High resolution of up to 16 bits ensures precise measurements |
| Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime |
| Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs |
| Programmable zero pulse position simplifies installation |
| Performance | |||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Шаг измерения: | 90 ° / electronically/number of lines | ||
| Время инициализации: | 30 ms, 32 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Масса: | 0.2 kg | ||
| Крутящий момент на старте: | 0.8 Ncm (+20 °C) | ||
| Момент вращения: | 0.6 Ncm (+20 °C) | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Bearing lifetime: | 3.6 x 10^10 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Shaft material: | Metal | ||
| Electrical data | |||
| Electrical interface: | 4.5 V ... 32 V, TTL/HTL programmable, Cable, 8-pin, universal, 1.5 m | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Maximum output frequency: | 600 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 °, electronically, gated with A and B | ||
| Диапазон рабочего напряжения: | 4.5 V ... 32 V | ||
| Load current max.: | 30 mA | ||
| Потребляемая мощность: | 0.7 W (without load) | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 70 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
Страницы: