Страницы:
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Male connector M12, 8-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Male connector M12, 8-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.002 ° | ||
| Шаг измерения: | ± 0.02 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 65,536 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Male connector M12, 8-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 10-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 10-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 10-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 10-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 10-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 10-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.002 ° | ||
| Шаг измерения: | ± 0.02 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 65,536 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 10-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 7-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 7-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 7-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 7-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 7-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 7-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.002 ° | ||
| Шаг измерения: | ± 0.02 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 65,536 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 7-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 6-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 6-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 6-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 6-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 6-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 6-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.002 ° | ||
| Шаг измерения: | ± 0.02 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 65,536 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V | ||
| Тип подключения: | Connector MS/10 6-pin, axial 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.002 ° | ||
| Шаг измерения: | ± 0.02 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 65,536 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.002 ° | ||
| Шаг измерения: | ± 0.02 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 65,536 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 10 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 10 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 10 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 10 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 10 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 10,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 10 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.002 ° | ||
| Шаг измерения: | ± 0.02 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 65,536 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, axial, 10 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 100 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, radial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, radial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 1,024 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, radial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 2,048 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, radial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
At a glance
| Compact 2-inch and 2.5-inch design |
| Integer resolutions from 1 to 65,536 pulse per rev |
| Compatible with PGT-08-S PC based programming tool |
| Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface |
| Flange, hollow shaft, and blind hollow shaft options |
| M12 connector, MS connector, and flying lead cable connection options |
Your benefits
| Programmable DFS2x encoders simplify machine designs by allowing the same model encoder to be used for different applications |
| Spare parts inventory requirements are reduced because a single programmable DFS2x encoder can be used across a variety of applications |
| Flexible electrical interface con-figurations reduces the risk that the selected encoder will be incompatible with input electronics |
| High-resolution provides more precise positioning for applications that require high accuracy |
| Wide operating temperature range and high tolerance of shock and vibration reduces downtime on machinery |
| Performance | |||
| Пределы погрешности: | ± 0.3 ° | ||
| Measuring step deviation: | ± 0.008 ° | ||
| Шаг измерения: | ± 0.08 ° / electronically/number of lines | ||
| Время инициализации: | 40 ms 1) | ||
| Pulses per revolution: | 5,000 | ||
| Mechanical data | |||
| Механический интерфейс: | Solid shaft with flat, Servo flange | ||
| Диаметр вала: | 3/8" | ||
| Масса: | 0.4 kg (maximum) | ||
| Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
| Момент вращения: | 0.3 Ncm (+20 °C) | ||
| Maximum operating speed: | 9,000 /min | ||
| Moment of inertia of the rotor: | 15 gcm² | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) | ||
| Electrical data | |||
| Electrical interface: | 8 V ... 30 V, open collector | ||
| Тип подключения: | Cable, 9-wire + shield, radial, 1.5 m 1) | ||
| Maximum output frequency: | 150 kHz | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 180 °, electronically, gated with A | ||
| Диапазон рабочего напряжения: | 8 V ... 30 V | ||
| Load current max.: | 50 mA | ||
| Power consumption max. without load: | 0.7 W (without load) | ||
| Initialisation time after power on: | 40 ms 2) | ||
| Кодовая последовательность: | Clockwise | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +80 °C | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
| Устойчивость к ударам: | 100 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| Enclosure rating: | IP 65 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (Condensation not permitted) | ||
Страницы: