At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 2) | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 3) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 4) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 5) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 6) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 3) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 4) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 5) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 6) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 3) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 4) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 5) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 6) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Cable, 5-wire, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 6 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 2) | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 30 V, TTL/RS422 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/Push pull 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Cable, 8-wire, universal, 0.5 m 3) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 4) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 5) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 6) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 3) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 4) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 5) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 6) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal 1)2) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 3) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 4) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 5) | ||
Power consumption max. without load: | ≤ 0.5 W | ||
Short-circuit protection of the outputs: | 1 6) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Connector M23, 12-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Male connector M12, 8-pin, radial | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 2) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 3) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 4) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Cable, 5-wire, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Cable with plug M12, 8-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
At a glance
Face mount flange, servo flange, blind and through hollow shaft |
Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
Flange and stator couplings enable diverse mounting options |
Resolution: up to 5,000 pulses |
Cable outlet, radial M23 or M12 connector |
TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
Diverse installation options due to different flange and shaft versions |
The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
Rugged design with large bearing distance allows high shaft loads and a longer service life |
The TTL/HTL combination interface enables less product variety and reduces storage costs |
Performance | |||
Пределы погрешности: | Measuring step deviation x 3 | ||
Measuring step deviation: | ± 18 ° / impulses per relovution | ||
Шаг измерения: | 90 ° / electronically/pulses per revolution | ||
Время инициализации: | 1) | ||
Pulses per revolution: | 100 2) | ||
Duty cycle: | ≤ 0.5 ± 5 % |
Mechanical data | |||
Механический интерфейс: | Blind hollow shaft | ||
Диаметр вала: | 8 mm (shaft isolated) | ||
Масса: | 0.25 kg 1) | ||
Крутящий момент на старте: | 0.5 Ncm (+20 °C) | ||
Момент вращения: | 0.4 Ncm (+20 °C) | ||
Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
Maximum operating speed: | 9,000 /min 2) | ||
Moment of inertia of the rotor: | 50 gcm² | ||
Bearing lifetime: | 3.6 x 10^9 revolutions | ||
Макс. угловое ускорение: | 200,000 rad/s² | ||
Shaft material: | Stainless steel with plastic shaft | ||
Operating speed: | 6,000 /min 3) | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Aluminum | ||
Material, cable: | PVC |
Electrical data | |||
Electrical interface: | 10 V ... 27 V, HTL/push pull, 3 channel 1) | ||
Тип подключения: | Cable with plug M23, 12-pin, universal, 0.5 m 2) | ||
Output current: | ≤ 30 mA, per channel | ||
Maximum output frequency: | 300 kHz 3) | ||
Reference signal, number: | 1 | ||
Reference signal, position: | 90 °, electronically, gated with A and B | ||
MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) 4) | ||
Power consumption max. without load: | ≤ 1 W | ||
Short-circuit protection of the outputs: | 1 5) | ||
Защита от обратной полярности: | 1 |
Данные окуражающей среды | |||
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
Working temperature range: | -20 °C ... +85 °C 1) | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 200 g, 3 ms (according to EN 60068-2-27) | ||
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2) | ||
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |