At a glance
| Measure complex profiles with just one laser line |
| Analyze up to four areas at the same time |
| More than 10 integrated measurement functions, e.g., height, width, and inclination |
| Sensor head and evaluation unit in one device |
| Commissioning via software or integrated display with operating elements |
| High-quality CMOS receiver unit |
Your benefits
| Measuring a 2D profile with just one sensor saves on hardware and installation costs |
| Cost-effective solution for 2D profile measurement |
| Real-time visualization of the measurement results via the integrated LC display |
| Intuitive and quick commissioning via the software or display reduces installation time |
| Thanks to the stand-alone concept of the Profilerâ„¢ 2, there is no need for cabling or to mount an additional evaluation unit |
| Reliable measuring regardless of color, material, or shape |
| More than 10 integrated measurement functions allow profiles to be measured and analyzed quickly |
| Performance | |||
| Measuring range: | 100 mm, ± 25 mm | ||
| Resolution 1)2): | X-direction 25 µm, Z-direction 2 µm | ||
| Linearity 3)4)5): | X-direction ± 1 % FS, Z-direction ± 0.1 % FS | ||
| Response time 6): | 5 ms | ||
| Источник света: | Laser, red | ||
| Typ. light spot size (distance): | 0.3 mm x 32 mm | ||
| Дополнительные функции: | Sensitivity (adjustable), Measurement functions (average, peak height, bottom height, width, peak position, bottom position, edge position, edge count, tilt, size, length, diameter), Averaging 1 ... 1,023, Timer (on/off delay, one shot, off) | ||
| Accuracy: | X-direction ± 5 % FS, Z-direction ± 1 % FS | ||
| Laser class: | 2 (EN 60825-1 / 21 CFR 1040.10) 7) | ||
| Measuring width (at measuring distance): | 17 mm (75 mm), 22 mm (100 mm), 27 mm (125 mm) | ||
| Interfaces | |||
| Интерфейс передачи данных: | RS-485 1) | ||
| Output type 2): | 3 x NPN | ||
| Analog output: | 1 x 4 mA ... 20 mA (3) | ||
| External input: | Selectable from bank, trigger, hold, reset, laser off and offset | ||
| Механика/электроника | |||
| Тип подключения: | Female connector, HRS, 12-pin (I/O, power supply) | ||
| Supply voltage Vs 1): | DC 12 V (-5 %) ... DC 24 V (+10 %) | ||
| Потребляемая мощность: | ≤ 180 mA | ||
| Время прогрева: | ≤ 30 min | ||
| Индикатор: | 2 LEDs (operational status, laser on/off), Dot matrix display | ||
| Вес: | Ca. 300 g | ||
| Dimensions: | 40 mm x 60 mm x 94.5 mm | ||
| Материал корпуса: | Die-cast zinc Polycarbonat |
||
| Данные окуражающей среды | |||
| Enclosure rating: | IP 67 | ||
| Класс защиты: | III | ||
| Ambient temperature: | Operation: -10 ... +40 °C, Storage: -20 ... +60 °C | ||
| Макс. отн. влажность (без конденсации): | 85 % | ||
| Температурный дрейф: | ± 0.05 % FS/K (FS = Full Scale = Measuring range of sensor) | ||
| Виброустойчивость: | 10 Hz ... 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each) | ||
| Ударопрочность: | 50 G (x-, y-, z-axis 3 times each) | ||
| Typ. ambient light safety: | Artificial light: ≤ 3,000 lx, Sunlight: ≤ 10,000 lx | ||
At a glance
| Measure complex profiles with just one laser line |
| Analyze up to four areas at the same time |
| More than 10 integrated measurement functions, e.g., height, width, and inclination |
| Sensor head and evaluation unit in one device |
| Commissioning via software or integrated display with operating elements |
| High-quality CMOS receiver unit |
Your benefits
| Measuring a 2D profile with just one sensor saves on hardware and installation costs |
| Cost-effective solution for 2D profile measurement |
| Real-time visualization of the measurement results via the integrated LC display |
| Intuitive and quick commissioning via the software or display reduces installation time |
| Thanks to the stand-alone concept of the Profilerâ„¢ 2, there is no need for cabling or to mount an additional evaluation unit |
| Reliable measuring regardless of color, material, or shape |
| More than 10 integrated measurement functions allow profiles to be measured and analyzed quickly |
| Performance | |||
| Measuring range: | 100 mm, ± 25 mm | ||
| Resolution 1)2): | X-direction 25 µm, Z-direction 2 µm | ||
| Linearity 3)4)5): | X-direction ± 1 % FS, Z-direction ± 0.1 % FS | ||
| Response time 6): | 5 ms | ||
| Источник света: | Laser, red | ||
| Typ. light spot size (distance): | 0.3 mm x 32 mm | ||
| Дополнительные функции: | Sensitivity (adjustable), Measurement functions (average, peak height, bottom height, width, peak position, bottom position, edge position, edge count, tilt, size, length, diameter), Averaging 1 ... 1,023, Timer (on/off delay, one shot, off) | ||
| Accuracy: | X-direction ± 5 % FS, Z-direction ± 1 % FS | ||
| Laser class: | 2 (EN 60825-1 / 21 CFR 1040.10) 7) | ||
| Measuring width (at measuring distance): | 17 mm (75 mm), 22 mm (100 mm), 27 mm (125 mm) | ||
| Interfaces | |||
| Интерфейс передачи данных: | RS-485 1) | ||
| Output type 2): | 3 x PNP | ||
| Analog output: | 1 x 4 mA ... 20 mA (3) | ||
| External input: | Selectable from bank, trigger, hold, reset, laser off and offset | ||
| Механика/электроника | |||
| Тип подключения: | Female connector, HRS, 12-pin (I/O, power supply) | ||
| Supply voltage Vs 1): | DC 12 V (-5 %) ... DC 24 V (+10 %) | ||
| Потребляемая мощность: | ≤ 180 mA | ||
| Время прогрева: | ≤ 30 min | ||
| Индикатор: | 2 LEDs (operational status, laser on/off), Dot matrix display | ||
| Вес: | Ca. 300 g | ||
| Dimensions: | 40 mm x 60 mm x 94.5 mm | ||
| Материал корпуса: | Die-cast zinc Polycarbonat |
||
| Данные окуражающей среды | |||
| Enclosure rating: | IP 67 | ||
| Класс защиты: | III | ||
| Ambient temperature: | Operation: -10 ... +40 °C, Storage: -20 ... +60 °C | ||
| Макс. отн. влажность (без конденсации): | 85 % | ||
| Температурный дрейф: | ± 0.05 % FS/K (FS = Full Scale = Measuring range of sensor) | ||
| Виброустойчивость: | 10 Hz ... 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each) | ||
| Ударопрочность: | 50 G (x-, y-, z-axis 3 times each) | ||
| Typ. ambient light safety: | Artificial light: ≤ 3,000 lx, Sunlight: ≤ 10,000 lx | ||