+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

SGS

 
 
Страницы:



Арт. 1211268

At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: With alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 160 mA
    Power consumption receiver 2): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1046966

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 160 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211895

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 160 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209927

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 160 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211689

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 160 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209288

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 160 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211306

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time 2): Parallel beam coded version 38 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M12, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 160 mA
    Power consumption receiver 2): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212927

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 20
    Высота обнаружения: 760 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M12, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 160 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 832.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 100 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1208201

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 184 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1208108

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 184 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211757

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 184 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1214817

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 184 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209924

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 184 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212061

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M12, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 184 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1208200

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 184 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1208596

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 184 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211305

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time 2): Parallel beam coded version 38 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M12, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 184 mA
    Power consumption receiver 2): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212928

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 24
    Высота обнаружения: 920 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M12, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 184 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 992.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 120 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209503

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO) 1): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Output 2: Output 2 inactive, if light beam interrupted
    Muting function output 2: Without muting function at output 2
    Alarm output 2: Alarm output at output 2 inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 2 x PNP
    Тип подключения: Short cable with connector M12, 4-pin
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1208155

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x NPN
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209472

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211642

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1045007

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211249

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209567

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1045017

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function active
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1210418

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO) 1): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1207519

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO) 1): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211250

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211901

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1214159

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time 2): Parallel beam coded version 38 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212305

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Cross beam coded version 114 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1214836

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: With alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time 2): Parallel beam coded version 38 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212343

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Cross beam coded version 114 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209457

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212304

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1214837

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: With alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1045009

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 7 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 208 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212344

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1210883

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 28
    Высота обнаружения: 1,080 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 208 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,152.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 140 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1209172

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO) 1): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: With alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x NPN
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 232 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212489

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Cross beam coded version 114 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 232 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211293

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 232 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212490

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 232 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1047815

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 232 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211391

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach inactive
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 232 mA
    Power consumption receiver 2): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1047903

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Parallel beam, 45 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Parallel beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Parallel beam: ≥0 mm 2)
    Рабочий диапазон: 3 m
    Response time: Parallel beam 19 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs 1): DC 24 V, ± 20 %
    Power consumption sender 2): 232 mA
    Power consumption receiver 3)4): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1211392

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Задачи: Switching light grid
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 active, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 4 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 3 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 232 mA
    Power consumption receiver 2): 70 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: With stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212462

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Cross beam coded version 114 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 232 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 250 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
    Арт. 1212463

    At a glance

  • Variable monitoring lengths from 120 mm up to 1,400 mm (in 160 mm increments)
  • Maximum range 10 m
  • Response time 18 ms
  • 25 mm or 45 mm detection resolution with 40 mm or 80 mm beam spacing possible
  • Order-picking with extra-bright job LEDS on the sender and receiver sides
  • IP 65 protection for various environmental conditions
  • Highly immune to sunlight at 150,000 lx

    Your benefits

  • Small, slim and sleek design enables easy integration into applications
  • Capacitive teach-in button and LEDs make commissioning easier for complex solutions
  • Slim and flat models offer flexible mounting options
  • User-defined factory preset configuration or flexible configuration with teach-in button
  • Optical synchronization eliminates the need to lay cables, saving time
  • Stealth detection in public places - at only 8 mm x 25 mm, it fits just about anywhere and can be imbedded inside walls, doors, conveyors, and machines, reducing damage
  • Auto-teach and auto-muting enable Plug & Play. And, an alignment aid and “Click & Go” provide faster installation.
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Cross beam, 25 mm
    Расстояние между лучами: 40 mm
    Количество лучей: 32
    Высота обнаружения: 1,240 mm
    Optical light exit: Slim
    Конфигурации: Without teach button with configuration software
    Cross beam/parallel beam: Cross beam active
    Output 1: Output 1 inactive, if light beam interrupted
    Automatic teach: Automatic teach active
    Alignment aid: Without alignment aid
    Muting function: Muting function inactive
    Performance
    Maximum range: 10 m 1)
    Минимальный диапазон Multiple scan: ≥0.3 mm 2)
    Рабочий диапазон: 7 m
    Response time: Multiple scan 57 ms
    Interfaces
    Output type: 1 x PNP
    Тип подключения: Short cable with connector M8, 4-pin
    Inputs: Teach input
    Механика/электроника
    Длина волны: IR 950 nm
    Supply voltage Vs: DC 24 V, ± 20 %
    Power consumption sender 1): 232 mA
    Power consumption receiver 2): 70 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 25 mm x 1,312.4 mm x 8 mm
    Материал корпуса: PMMA
    Индикатор: LED
    Защита цепи: Output Q short-circuit protected
    Interference suppression
    VS connections reverse-polarity protected
    Вес: 160 g
    Частота переключений: 500 kHz
    Aluminum stabilizer: Without stabilizer
    Синхронизации: Optical
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C
    Storage: -25 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / DIN EN 60068-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥100,000 lx, Indirect: ≥150,000 lx 1)
     
     


    Страницы:

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: