At a glance
| Up to 128 beams |
| Different beam separations 30 mm and 60 mm |
| High functional reserve (gain) for ranges up to 12 m |
| Potentiometer for sensitivity setting |
| Ambient light up to 150,000 lux |
| Tough, aluminum housing |
| PNP/NPN/relay output and a test input |
| Optical synchronization |
Your benefits
| Insensitive to ambient light when exposed to direct sunlight, strobe lights, and highly reflective objects, eliminating false trips |
| High functional reserve (excess gain) ensures operation even if it gets dirty, dusty, or misaligned, reducing maintenance costs |
| Efficient and effective way to combine multiple sensors in one housing with one connector |
| Simple commissioning thanks to a larger optical aperture angle and manual fine adjustment option |
| Optical synchronization enables quick installation and cost-effective connection |
| The sensitivity adjustment can be used to detect or ignore translucent materials to reduce production problems |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Switching light grid | ||
| Minimum detectable object (MDO): | Cross beam: ≥ 20 mm ... 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 8 | ||
| Высота обнаружения: | 210 mm | ||
| Evaluation beams: | Multiple scan | ||
| Performance | |||
| Maximum range: | 17 m | ||
| Минимальный диапазон | ≥500 mm | ||
| Рабочий диапазон: | 12 m | ||
| Response time 1): | Cross beam 84 ms | ||
| Interfaces | |||
| Output type: | 2 x PNP (Q and /Q) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Test input: | PNP | ||
| Механика/электроника | |||
| Длина волны: | 880 nm | ||
| Supply voltage Vs 1): | DC 15 V ... 30 V | ||
| Power consumption sender 2): | |||
| Power consumption receiver 3): | |||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 286 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | LED | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
||
| Вес: | 1,000 g | ||
| Передний экран: | PMMA | ||
| Output mode 4): | Q dark switching | ||
| Частота переключений: | 250 kHz | ||
| Синхронизации: | Optical | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C Storage: -40 ... +70 °C |
||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / DIN EN 60068-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Indirect: ≤ 150,000 lx 1) | ||
At a glance
| Up to 128 beams |
| Different beam separations 30 mm and 60 mm |
| High functional reserve (gain) for ranges up to 12 m |
| Potentiometer for sensitivity setting |
| Ambient light up to 150,000 lux |
| Tough, aluminum housing |
| PNP/NPN/relay output and a test input |
| Optical synchronization |
Your benefits
| Insensitive to ambient light when exposed to direct sunlight, strobe lights, and highly reflective objects, eliminating false trips |
| High functional reserve (excess gain) ensures operation even if it gets dirty, dusty, or misaligned, reducing maintenance costs |
| Efficient and effective way to combine multiple sensors in one housing with one connector |
| Simple commissioning thanks to a larger optical aperture angle and manual fine adjustment option |
| Optical synchronization enables quick installation and cost-effective connection |
| The sensitivity adjustment can be used to detect or ignore translucent materials to reduce production problems |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Switching light grid | ||
| Minimum detectable object (MDO): | Parallel beam: ≥ 35 mm ... 65 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 12 | ||
| Высота обнаружения: | 330 mm | ||
| Evaluation beams: | Parallel beam | ||
| Performance | |||
| Maximum range: | 17 m | ||
| Минимальный диапазон | ≥0 mm | ||
| Рабочий диапазон: | 12 m | ||
| Response time 1): | Parallel beam 28 ms | ||
| Interfaces | |||
| Output type: | 2 x PNP (Q and /Q) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Test input: | PNP | ||
| Механика/электроника | |||
| Длина волны: | 880 nm | ||
| Supply voltage Vs 1): | DC 15 V ... 30 V | ||
| Power consumption sender 2): | |||
| Power consumption receiver 3): | |||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 526 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | LED | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
||
| Вес: | 1,500 g | ||
| Передний экран: | PMMA | ||
| Output mode 4): | Q dark switching | ||
| Частота переключений: | 250 kHz | ||
| Синхронизации: | Optical | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C Storage: -40 ... +70 °C |
||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / DIN EN 60068-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Indirect: ≤ 150,000 lx 1) | ||
At a glance
| Up to 128 beams |
| Different beam separations 30 mm and 60 mm |
| High functional reserve (gain) for ranges up to 12 m |
| Potentiometer for sensitivity setting |
| Ambient light up to 150,000 lux |
| Tough, aluminum housing |
| PNP/NPN/relay output and a test input |
| Optical synchronization |
Your benefits
| Insensitive to ambient light when exposed to direct sunlight, strobe lights, and highly reflective objects, eliminating false trips |
| High functional reserve (excess gain) ensures operation even if it gets dirty, dusty, or misaligned, reducing maintenance costs |
| Efficient and effective way to combine multiple sensors in one housing with one connector |
| Simple commissioning thanks to a larger optical aperture angle and manual fine adjustment option |
| Optical synchronization enables quick installation and cost-effective connection |
| The sensitivity adjustment can be used to detect or ignore translucent materials to reduce production problems |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Switching light grid | ||
| Minimum detectable object (MDO): | Parallel beam: ≥ 35 mm ... 65 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 104 | ||
| Высота обнаружения: | 3,090 mm | ||
| Evaluation beams: | Parallel beam | ||
| Performance | |||
| Maximum range: | 17 m | ||
| Минимальный диапазон | ≥0 mm | ||
| Рабочий диапазон: | 12 m | ||
| Response time 1): | Parallel beam 180 ms | ||
| Interfaces | |||
| Output type: | 2 x PNP (Q and /Q) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Test input: | PNP | ||
| Механика/электроника | |||
| Длина волны: | 880 nm | ||
| Supply voltage Vs 1): | DC 15 V ... 30 V | ||
| Power consumption sender 2): | |||
| Power consumption receiver 3): | |||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 3,166 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | LED | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
||
| Вес: | 7,600 g | ||
| Передний экран: | PMMA | ||
| Output mode 4): | Q dark switching | ||
| Частота переключений: | 250 kHz | ||
| Синхронизации: | Optical | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C Storage: -40 ... +70 °C |
||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / DIN EN 60068-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Indirect: ≤ 150,000 lx 1) | ||
At a glance
| Up to 128 beams |
| Different beam separations 30 mm and 60 mm |
| High functional reserve (gain) for ranges up to 12 m |
| Potentiometer for sensitivity setting |
| Ambient light up to 150,000 lux |
| Tough, aluminum housing |
| PNP/NPN/relay output and a test input |
| Optical synchronization |
Your benefits
| Insensitive to ambient light when exposed to direct sunlight, strobe lights, and highly reflective objects, eliminating false trips |
| High functional reserve (excess gain) ensures operation even if it gets dirty, dusty, or misaligned, reducing maintenance costs |
| Efficient and effective way to combine multiple sensors in one housing with one connector |
| Simple commissioning thanks to a larger optical aperture angle and manual fine adjustment option |
| Optical synchronization enables quick installation and cost-effective connection |
| The sensitivity adjustment can be used to detect or ignore translucent materials to reduce production problems |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Switching light grid | ||
| Minimum detectable object (MDO): | Parallel beam: ≥ 35 mm ... 65 mm | ||
| Расстояние между лучами: | 60 mm | ||
| Количество лучей: | 32 | ||
| Высота обнаружения: | 1,860 mm | ||
| Evaluation beams: | Parallel beam | ||
| Performance | |||
| Минимальный диапазон | ≥0 mm | ||
| Рабочий диапазон: | 2.5 m | ||
| Response time 1): | Parallel beam 100 ms | ||
| Interfaces | |||
| Output type: | 2 x PNP (Q and /Q) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Test input: | PNP | ||
| Механика/электроника | |||
| Длина волны: | 880 nm | ||
| Supply voltage Vs 1): | DC 15 V ... 30 V | ||
| Power consumption sender 2): | |||
| Power consumption receiver 3): | |||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,936 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | LED | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
||
| Вес: | 4,800 g | ||
| Передний экран: | PMMA | ||
| Output mode 4): | Q dark switching | ||
| Частота переключений: | 250 kHz | ||
| Синхронизации: | Optical | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C Storage: -40 ... +70 °C |
||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / DIN EN 60068-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Indirect: ≤ 150,000 lx 1) | ||