At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid (special software for pallet overhang detection) | ||
Minimum detectable object (MDO) 1): | Parallel beam: 15 mm (10 mm beam separation), Parallel beam: 30 mm (20 mm beam separation) | ||
Расстояние между лучами: | 10 mm (up to 300 mm detection height), 20 mm (up to 2,380 mm detection height) | ||
Количество лучей: | 135 | ||
Высота обнаружения: | 2,380 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 21.25 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | 950 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 113.5 mA | ||
Power consumption receiver 3): | 187.5 mA | ||
Пульсации: | 10 Vpp | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 2,464 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display, LED | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 5.974 kg | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 60 | ||
Высота обнаружения: | 590 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 10 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 260 mA | ||
Power consumption receiver 2): | 280 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 664 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 1.857 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 75 | ||
Высота обнаружения: | 740 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 12.25 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 290 mA | ||
Power consumption receiver 2): | 325 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 814 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.202 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 90 | ||
Высота обнаружения: | 890 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 14.5 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 320 mA | ||
Power consumption receiver 2): | 370 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 964 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.547 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 105 | ||
Высота обнаружения: | 1,040 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 16.75 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 350 mA | ||
Power consumption receiver 2): | 415 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 1,114 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.892 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 180 | ||
Высота обнаружения: | 1,790 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 28 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 500 mA | ||
Power consumption receiver 2): | 640 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 1,864 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.617 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO) 1): | Parallel beam, 20 mm | ||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 195 | ||
Высота обнаружения: | 1,940 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 30.25 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 530 mA | ||
Power consumption receiver 3): | 685 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 2,014 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.962 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 25 mm | ||
Расстояние между лучами: | 20 mm | ||
Количество лучей: | 23 | ||
Высота обнаружения: | 440 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 4.45 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 186 mA | ||
Power consumption receiver 2): | 169 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 524 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 1.512 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO): | Parallel beam, 25 mm | ||
Расстояние между лучами: | 20 mm | ||
Количество лучей: | 68 | ||
Высота обнаружения: | 1,340 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 11.2 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 276 mA | ||
Power consumption receiver 2): | 304 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 1,424 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 3.582 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO) 1): | Parallel beam, 25 mm | ||
Расстояние между лучами: | 20 mm | ||
Количество лучей: | 83 | ||
Высота обнаружения: | 1,640 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 13.45 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 306 mA | ||
Power consumption receiver 3): | 349 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 1,724 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.272 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO) 1): | Parallel beam, 30 mm | ||
Расстояние между лучами: | 20 mm | ||
Количество лучей: | 90 | ||
Высота обнаружения: | 1,780 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 14.5 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 320 mA | ||
Power consumption receiver 3): | 370 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 1,864 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.594 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO) 1): | Parallel beam, 25 mm | ||
Расстояние между лучами: | 20 mm | ||
Количество лучей: | 105 | ||
Высота обнаружения: | 2,080 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 16.75 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 350 mA | ||
Power consumption receiver 3): | 415 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 2,164 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 5.284 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 30 mm | ||
Расстояние между лучами: | 20 mm | ||
Количество лучей: | 158 | ||
Высота обнаружения: | 3,140 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 12 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 24.7 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 456 mA | ||
Power consumption receiver 2): | 574 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 3,224 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 7.722 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
Расстояние между лучами: | 30 mm | ||
Количество лучей: | 85 | ||
Высота обнаружения: | 2,520 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 13.75 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 310 mA | ||
Power consumption receiver 2): | 355 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 2,614 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 6.296 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO) 1): | Parallel beam, 55 mm | ||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 6 | ||
Высота обнаружения: | 250 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 1.9 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 152 mA | ||
Power consumption receiver 3): | 118 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 364 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 1.075 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 33 | ||
Высота обнаружения: | 1,600 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 5.95 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 206 mA | ||
Power consumption receiver 2): | 199 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 1,714 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.18 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 63 | ||
Высота обнаружения: | 3,100 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 10.45 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 266 mA | ||
Power consumption receiver 2): | 289 mA | ||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 3,214 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 7.63 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) |
At a glance
Integrated PROFIBUS interface |
Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
Working range up to 8.5 m |
Detection heights of over 3 m and up to 240 beams possible |
Short response time |
External teach-in for optimal sensitivity settings |
Your benefits
Integrated PROFIBUS User Organization (PNO) number and GSD file for easy connection to a PLC |
Low cabling requirement reduces installation costs |
Easy-to-see light grid status information via the bus system helps avoid interrupting operation |
Different beam separation options, detection heights and output configurations ensure a reliable solution |
Features | |||
Технологии: | Sender/receiver | ||
Задачи: | Measurement light grid | ||
Minimum detectable object (MDO): | Cross beam, 17.5 mm | ||
Расстояние между лучами: | 25 mm | ||
Количество лучей: | 42 | ||
Высота обнаружения: | 1,025 mm | ||
Конфигурации: | GSD data file |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | Parallel beam: ≥0 mm | ||
Response time 2): | Parallel beam 7.3 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | Profibus | ||
Output type: | 1 x PNP | ||
Inputs: | 1 x PNP | ||
Тип подключения: | Male connector M12, 8-pin | ||
IO-Link: | - |
Механика/электроника | |||
Длина волны: | Infrared light 880 nm | ||
Supply voltage Vs: | DC 18 V ... 30 V | ||
Power consumption sender 1): | 224 mA | ||
Power consumption receiver 2): | 226 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | 1 s | ||
Dimensions (W x H x D): | 34 mm x 1,114 mm x 29 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | 7-segment display | ||
Enclosure rating: | IP 65 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.858 kg | ||
Передний экран: | PMMA | ||
Синхронизации: | Cable |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) |