Страницы:
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 15 | ||
| Высота обнаружения: | 140 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 3.25 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x NPN | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 170 mA | ||
| Power consumption receiver 2): | 145 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 214 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 0.822 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Cross beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 30 | ||
| Высота обнаружения: | 290 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Cross beam: ≥200 mm | ||
| Response time 2): | Cross beam 16.5 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 200 mA | ||
| Power consumption receiver 2): | 190 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 364 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.167 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 45 | ||
| Высота обнаружения: | 440 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 7.75 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 230 mA | ||
| Power consumption receiver 2): | 235 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 514 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.512 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 45 | ||
| Высота обнаружения: | 440 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 7.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 3 x PNP | ||
| Inputs: | 1 x PNP | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 230 mA | ||
| Power consumption receiver 2): | 235 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 514 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.512 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 60 | ||
| Высота обнаружения: | 590 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 10 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x NPN | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 260 mA | ||
| Power consumption receiver 2): | 280 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 664 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.857 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 105 | ||
| Высота обнаружения: | 1,040 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 16.75 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 350 mA | ||
| Power consumption receiver 2): | 415 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,114 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 2.892 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 120 | ||
| Высота обнаружения: | 1,190 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 19 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 3 x PNP | ||
| Inputs: | 1 x PNP | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 380 mA | ||
| Power consumption receiver 2): | 460 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,264 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.237 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 135 | ||
| Высота обнаружения: | 1,340 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 21.25 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 3 x NPN | ||
| Inputs: | 1 x NPN | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 410 mA | ||
| Power consumption receiver 2): | 505 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,414 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.582 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 135 | ||
| Высота обнаружения: | 1,340 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 21.25 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 410 mA | ||
| Power consumption receiver 2): | 505 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,414 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.582 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 10 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 135 | ||
| Высота обнаружения: | 1,340 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥200 mm | ||
| Response time 2): | Cross beam 63.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs 1): | DC 18 V ... 30 V | ||
| Power consumption sender 2): | 410 mA | ||
| Power consumption receiver 3): | 505 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,414 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.582 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Cross beam, 10 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 180 | ||
| Высота обнаружения: | 1,790 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥200 mm | ||
| Response time 2): | Cross beam 84 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 500 mA | ||
| Power consumption receiver 2): | 640 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,864 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.617 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 15 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 225 | ||
| Высота обнаружения: | 2,240 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 34.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 590 mA | ||
| Power consumption receiver 2): | 775 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,314 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 5.652 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 20 mm | ||
| Расстояние между лучами: | 10 mm | ||
| Количество лучей: | 240 | ||
| Высота обнаружения: | 2,390 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 37 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 620 mA | ||
| Power consumption receiver 2): | 820 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,464 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 5.997 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 25 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 15 | ||
| Высота обнаружения: | 280 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 3.25 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x NPN | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 170 mA | ||
| Power consumption receiver 2): | 145 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 364 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.144 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 30 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 23 | ||
| Высота обнаружения: | 440 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 4.45 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 186 mA | ||
| Power consumption receiver 2): | 169 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 524 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.512 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Cross beam, 15 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 23 | ||
| Высота обнаружения: | 440 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥360 mm | ||
| Response time 2): | Cross beam 13.35 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 186 mA | ||
| Power consumption receiver 2): | 169 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 524 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.512 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO) 1): | Parallel beam, 25 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 30 | ||
| Высота обнаружения: | 580 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 5.5 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs 1): | DC 18 V ... 30 V | ||
| Power consumption sender 2): | 200 mA | ||
| Power consumption receiver 3): | 190 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 664 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.834 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 30 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 75 | ||
| Высота обнаружения: | 1,480 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 12.25 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 290 mA | ||
| Power consumption receiver 2): | 325 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,564 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.904 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO) 1): | Parallel beam, 25 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 83 | ||
| Высота обнаружения: | 1,640 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 13.45 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs 1): | DC 18 V ... 30 V | ||
| Power consumption sender 2): | 306 mA | ||
| Power consumption receiver 3): | 349 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,724 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.272 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO) 1): | Parallel beam, 25 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 83 | ||
| Высота обнаружения: | 1,640 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 13.45 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 3 x PNP | ||
| Inputs: | 1 x PNP | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs 1): | DC 18 V ... 30 V | ||
| Power consumption sender 2): | 306 mA | ||
| Power consumption receiver 3): | 349 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,724 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.272 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 25 mm | ||
| Расстояние между лучами: | 20 mm | ||
| Количество лучей: | 98 | ||
| Высота обнаружения: | 1,940 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 15.7 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 336 mA | ||
| Power consumption receiver 2): | 394 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,024 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.962 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 10 | ||
| Высота обнаружения: | 270 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 2.5 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x NPN | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 160 mA | ||
| Power consumption receiver 2): | 130 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 364 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.121 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 25 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 10 | ||
| Высота обнаружения: | 270 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Cross beam: ≥520 mm | ||
| Response time 2): | Cross beam 7.5 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 160 mA | ||
| Power consumption receiver 2): | 130 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 364 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.121 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 15 | ||
| Высота обнаружения: | 420 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 3.25 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 3 x PNP | ||
| Inputs: | 1 x PNP | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 170 mA | ||
| Power consumption receiver 2): | 145 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 514 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.466 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 35 | ||
| Высота обнаружения: | 1,020 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 6.25 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 210 mA | ||
| Power consumption receiver 2): | 205 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,114 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 2.846 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 40 | ||
| Высота обнаружения: | 1,170 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 7 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 220 mA | ||
| Power consumption receiver 2): | 220 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,264 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.191 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 45 | ||
| Высота обнаружения: | 1,320 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 7.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x NPN | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 230 mA | ||
| Power consumption receiver 2): | 235 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,414 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.536 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 45 | ||
| Высота обнаружения: | 1,320 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 7.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 230 mA | ||
| Power consumption receiver 2): | 235 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,414 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.536 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 40 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 50 | ||
| Высота обнаружения: | 1,470 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 8.5 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 3 x PNP | ||
| Inputs: | 1 x PNP | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 240 mA | ||
| Power consumption receiver 2): | 250 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,564 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.881 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 60 | ||
| Высота обнаружения: | 1,770 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 10 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 260 mA | ||
| Power consumption receiver 2): | 280 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,864 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.571 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO) 1): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 70 | ||
| Высота обнаружения: | 2,070 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 11.5 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs 1): | DC 18 V ... 30 V | ||
| Power consumption sender 2): | 280 mA | ||
| Power consumption receiver 3): | 310 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,164 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 5.261 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO) 1): | Cross beam, 20 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 75 | ||
| Высота обнаружения: | 2,220 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥520 mm | ||
| Response time 2): | Cross beam 36.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs 1): | DC 18 V ... 30 V | ||
| Power consumption sender 2): | 290 mA | ||
| Power consumption receiver 3): | 325 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,314 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display, LED | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 5.606 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 85 | ||
| Высота обнаружения: | 2,520 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 13.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 310 mA | ||
| Power consumption receiver 2): | 355 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,614 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 6.296 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 95 | ||
| Высота обнаружения: | 2,820 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 15.25 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 330 mA | ||
| Power consumption receiver 2): | 385 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,914 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 6.986 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 35 mm | ||
| Расстояние между лучами: | 30 mm | ||
| Количество лучей: | 105 | ||
| Высота обнаружения: | 3,120 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 16.75 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 350 mA | ||
| Power consumption receiver 2): | 415 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 3,214 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 7.676 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 6 | ||
| Высота обнаружения: | 250 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 1.9 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x NPN | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 152 mA | ||
| Power consumption receiver 2): | 118 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 364 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.075 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 12 | ||
| Высота обнаружения: | 550 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 2.8 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 164 mA | ||
| Power consumption receiver 2): | 136 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 664 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.765 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 30 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 12 | ||
| Высота обнаружения: | 550 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥840 mm | ||
| Response time 2): | Cross beam 8.4 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 164 mA | ||
| Power consumption receiver 2): | 136 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 664 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 1.765 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 18 | ||
| Высота обнаружения: | 850 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 3.7 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 176 mA | ||
| Power consumption receiver 2): | 154 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 964 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 2.455 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 21 | ||
| Высота обнаружения: | 1,000 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 4.15 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x NPN | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 182 mA | ||
| Power consumption receiver 2): | 163 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,114 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 2.8 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 21 | ||
| Высота обнаружения: | 1,000 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 4.15 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 3 x NPN | ||
| Inputs: | 1 x NPN | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 182 mA | ||
| Power consumption receiver 2): | 163 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,114 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 2.8 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 60 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 21 | ||
| Высота обнаружения: | 1,000 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 4.15 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 3 x NPN | ||
| Inputs: | 1 x NPN | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 182 mA | ||
| Power consumption receiver 2): | 163 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,114 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 2.8 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 30 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 24 | ||
| Высота обнаружения: | 1,150 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥840 mm | ||
| Response time 2): | Cross beam 13.8 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 188 mA | ||
| Power consumption receiver 2): | 172 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,264 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.145 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 27 | ||
| Высота обнаружения: | 1,300 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 5.05 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 3 x PNP | ||
| Inputs: | 1 x PNP | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 194 mA | ||
| Power consumption receiver 2): | 181 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,414 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.49 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 30 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 30 | ||
| Высота обнаружения: | 1,450 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥840 mm | ||
| Response time 2): | Cross beam 16.5 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 200 mA | ||
| Power consumption receiver 2): | 190 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,564 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 3.835 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 55 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 36 | ||
| Высота обнаружения: | 1,750 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 6.4 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 212 mA | ||
| Power consumption receiver 2): | 208 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,864 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.525 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 30 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 36 | ||
| Высота обнаружения: | 1,750 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥840 mm | ||
| Response time 2): | Cross beam 19.2 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 212 mA | ||
| Power consumption receiver 2): | 208 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 1,864 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.525 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 30 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 39 | ||
| Высота обнаружения: | 1,900 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥840 mm | ||
| Response time 2): | Cross beam 20.55 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 218 mA | ||
| Power consumption receiver 2): | 217 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,014 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 4.87 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Задачи: | Measurement light grid | ||
| Minimum detectable object (MDO): | Cross beam, 30 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 42 | ||
| Высота обнаружения: | 2,050 mm | ||
| Конфигурации: | 3-times cross beam | ||
| Performance | |||
| Maximum range 1): | 7 m | ||
| Минимальный диапазон | Cross beam: ≥840 mm | ||
| Response time 2): | Cross beam 21.9 ms | ||
| Рабочий диапазон: | 5 m | ||
| Interfaces | |||
| Output type: | 1 x PNP | ||
| Тип подключения: | Connector M12, 5-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 224 mA | ||
| Power consumption receiver 2): | 226 mA | ||
| Пульсации: | |||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,164 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Enclosure rating: | IP 65 | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 5.215 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2) | ||
At a glance
| Up to 3 x PNP or NPN switching outputs |
| Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions |
| Working range up to 8.5 m |
| Detection heights of over 3 m and up to 240 beams possible |
| Short response time |
| Automatic teach during power on |
Your benefits
| Easy-to-see status information helps avoid interrupting operation, saves costs |
| Different beam separation options, detection heights and output configurations ensure a reliable solution |
| Integrated interfaces reduce cabling time and costs |
| A fully modular system guarantees the optimal solution for the customer |
| Features | |||
| Технологии: | Sender/receiver | ||
| Minimum detectable object (MDO): | Parallel beam, 60 mm | ||
| Расстояние между лучами: | 50 mm | ||
| Количество лучей: | 45 | ||
| Высота обнаружения: | 2,200 mm | ||
| Конфигурации: | Standard (switching) | ||
| Performance | |||
| Maximum range 1): | 12 m | ||
| Минимальный диапазон | Parallel beam: ≥0 mm | ||
| Response time 2): | Parallel beam 7.75 ms | ||
| Рабочий диапазон: | 8.5 m | ||
| Interfaces | |||
| Output type: | 3 x PNP | ||
| Inputs: | 1 x PNP | ||
| Тип подключения: | Male connector M12, 8-pin | ||
| IO-Link: | - | ||
| Механика/электроника | |||
| Длина волны: | Infrared light 880 nm | ||
| Supply voltage Vs: | DC 18 V ... 30 V | ||
| Power consumption sender 1): | 230 mA | ||
| Power consumption receiver 2): | 235 mA | ||
| Output current Imax.: | 100 mA | ||
| Output load capacitive: | 100 nF | ||
| Выходная нагрузка индуктивная: | 1 H | ||
| Время инициализации: | 1 s | ||
| Dimensions (W x H x D): | 34 mm x 2,314 mm x 29 mm | ||
| Материал корпуса: | Aluminum | ||
| Индикатор: | 7-segment display | ||
| Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
| Вес: | 5.56 kg | ||
| Передний экран: | PMMA | ||
| Синхронизации: | Cable | ||
| Данные окуражающей среды | |||
| Класс защиты: | III | ||
| EMC: | EN 60947-5-2 | ||
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C | ||
| Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) | ||
| Shock load: | 10 g / IEC 68-2-29 / 16 ms | ||
| Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1) | ||
Страницы: