+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

MLG Analog Output

 
 
Страницы:
12
 



Арт. 1061328

At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 15
    Высота обнаружения: 140 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 3.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    4 x PNP
    Inputs: 2 x PNP
    Тип подключения: Terminals
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 170 mA
    Power consumption receiver 2): 145 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 325 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.822 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1056060

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 15
    Высота обнаружения: 140 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 3.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    4 x PNP
    Inputs: 2 x PNP
    Тип подключения: Connector M12, 12-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 170 mA
    Power consumption receiver 2): 145 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 214 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.822 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1056175

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 15
    Высота обнаружения: 140 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 3.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 170 mA
    Power consumption receiver 2): 145 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 214 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.822 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1062481

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 30
    Высота обнаружения: 290 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 5.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    4 x PNP
    Inputs: 2 x PNP
    Тип подключения: Terminals
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 200 mA
    Power consumption receiver 2): 190 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 475 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.167 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1057757

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 30
    Высота обнаружения: 290 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 5.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    4 x PNP
    Inputs: 2 x PNP
    Тип подключения: Connector M12, 12-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 200 mA
    Power consumption receiver 2): 190 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 364 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.167 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1053489

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 30
    Высота обнаружения: 290 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 5.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 200 mA
    Power consumption receiver 3): 190 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 364 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.167 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1069199

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 20 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 30
    Высота обнаружения: 290 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 5.5 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 200 mA
    Power consumption receiver 2): 190 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 364 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.167 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1059291

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 45
    Высота обнаружения: 440 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 7.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 230 mA
    Power consumption receiver 2): 235 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 514 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.512 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1066682

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 45
    Высота обнаружения: 440 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 7.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x NPN
    Inputs: 1 x NPN
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 230 mA
    Power consumption receiver 2): 235 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 514 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.512 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1054673

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 60
    Высота обнаружения: 590 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 10 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 260 mA
    Power consumption receiver 3): 280 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 664 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.857 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1055807

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 20 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 60
    Высота обнаружения: 590 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 10 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 260 mA
    Power consumption receiver 2): 280 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 664 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.857 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1056728

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 75
    Высота обнаружения: 740 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 12.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 290 mA
    Power consumption receiver 2): 325 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 814 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.202 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1056729

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 90
    Высота обнаружения: 890 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 14.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 320 mA
    Power consumption receiver 2): 370 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 964 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.547 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1057071

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 105
    Высота обнаружения: 1,040 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 16.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 350 mA
    Power consumption receiver 2): 415 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,114 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.892 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1064129

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 20 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 105
    Высота обнаружения: 1,040 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 16.75 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 350 mA
    Power consumption receiver 2): 415 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,114 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.892 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1056861

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 135
    Высота обнаружения: 1,340 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 21.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 410 mA
    Power consumption receiver 2): 505 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,414 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.582 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1060584

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 150
    Высота обнаружения: 1,490 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 23.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 440 mA
    Power consumption receiver 2): 550 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,564 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.927 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1058796

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 20 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 150
    Высота обнаружения: 1,490 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 23.5 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 440 mA
    Power consumption receiver 2): 550 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,564 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.927 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1057121

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 165
    Высота обнаружения: 1,640 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 25.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 470 mA
    Power consumption receiver 2): 595 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,714 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.272 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1059854

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 195
    Высота обнаружения: 1,940 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 30.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 530 mA
    Power consumption receiver 2): 685 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,014 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.962 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1055177

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 225
    Высота обнаружения: 2,240 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 34.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 590 mA
    Power consumption receiver 3): 775 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,314 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.652 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1055178

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 20 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 225
    Высота обнаружения: 2,240 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 34.75 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 590 mA
    Power consumption receiver 3): 775 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,314 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.652 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1055185

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 15 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 225
    Высота обнаружения: 2,240 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 34.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x NPN
    Inputs: 1 x NPN
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 590 mA
    Power consumption receiver 3): 775 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,314 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.652 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1055186

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 20 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 225
    Высота обнаружения: 2,240 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 34.75 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x NPN
    Inputs: 1 x NPN
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 590 mA
    Power consumption receiver 3): 775 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,314 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.652 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1063575

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 15
    Высота обнаружения: 280 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 3.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    4 x PNP
    Inputs: 2 x PNP
    Тип подключения: Terminals
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 170 mA
    Power consumption receiver 2): 145 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 475 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.144 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1070239

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 15
    Высота обнаружения: 280 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 3.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 170 mA
    Power consumption receiver 2): 145 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 364 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.144 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1061757

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 23
    Высота обнаружения: 440 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 4.45 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 186 mA
    Power consumption receiver 2): 169 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 524 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.512 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1055179

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 30
    Высота обнаружения: 580 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 5.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 200 mA
    Power consumption receiver 3): 190 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 664 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.834 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1056893

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 45
    Высота обнаружения: 880 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 7.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 230 mA
    Power consumption receiver 2): 235 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 964 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.524 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1060859

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 53
    Высота обнаружения: 1,040 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 8.95 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 246 mA
    Power consumption receiver 2): 259 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,124 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.892 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1062717

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 83
    Высота обнаружения: 1,640 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 13.45 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 306 mA
    Power consumption receiver 2): 349 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,724 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.272 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1062701

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 98
    Высота обнаружения: 1,940 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 15.7 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 336 mA
    Power consumption receiver 2): 394 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,024 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.962 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1062718

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 25 mm
    Расстояние между лучами: 20 mm
    Количество лучей: 113
    Высота обнаружения: 2,240 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 17.95 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 366 mA
    Power consumption receiver 2): 439 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,324 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.652 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1057775

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 35 mm
    Расстояние между лучами: 30 mm
    Количество лучей: 15
    Высота обнаружения: 420 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 3.25 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 170 mA
    Power consumption receiver 2): 145 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 514 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.466 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1066850

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 35 mm
    Расстояние между лучами: 30 mm
    Количество лучей: 20
    Высота обнаружения: 570 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 4 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 180 mA
    Power consumption receiver 2): 160 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 664 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.811 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1063758

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 40 mm
    Расстояние между лучами: 30 mm
    Количество лучей: 35
    Высота обнаружения: 1,020 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 6.25 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 210 mA
    Power consumption receiver 2): 205 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,114 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.846 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1064527

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 35 mm
    Расстояние между лучами: 30 mm
    Количество лучей: 40
    Высота обнаружения: 1,170 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 7 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 220 mA
    Power consumption receiver 2): 220 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,264 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.191 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1072154

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 35 mm
    Расстояние между лучами: 30 mm
    Количество лучей: 45
    Высота обнаружения: 1,320 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 7.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 230 mA
    Power consumption receiver 2): 235 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,414 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.536 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1055180

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 35 mm
    Расстояние между лучами: 30 mm
    Количество лучей: 50
    Высота обнаружения: 1,470 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 8.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 240 mA
    Power consumption receiver 3): 250 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,564 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.881 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1061352

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 35 mm
    Расстояние между лучами: 30 mm
    Количество лучей: 65
    Высота обнаружения: 1,920 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 10.75 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 270 mA
    Power consumption receiver 2): 295 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,014 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.916 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1055181

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 55 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 3
    Высота обнаружения: 100 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 1.45 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 146 mA
    Power consumption receiver 3): 109 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 214 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.73 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1055183

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 60 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 3
    Высота обнаружения: 100 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 1.45 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 146 mA
    Power consumption receiver 3): 109 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 214 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.73 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1055187

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 55 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 3
    Высота обнаружения: 100 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 1.45 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x NPN
    Inputs: 1 x NPN
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 146 mA
    Power consumption receiver 3): 109 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 214 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.73 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1055189

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 60 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 3
    Высота обнаружения: 100 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 1.45 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x NPN
    Inputs: 1 x NPN
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 146 mA
    Power consumption receiver 3): 109 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 214 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.73 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1067277

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 55 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 24
    Высота обнаружения: 1,150 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 4.6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 188 mA
    Power consumption receiver 2): 172 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,264 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.145 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1056176

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 55 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 27
    Высота обнаружения: 1,300 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 5.05 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    4 x PNP
    Inputs: 2 x PNP
    Тип подключения: Terminals
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 194 mA
    Power consumption receiver 2): 181 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,525 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.49 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1059856

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 55 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 33
    Высота обнаружения: 1,600 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 5.95 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 206 mA
    Power consumption receiver 2): 199 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 1,714 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.18 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1055182

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Задачи: Measurement light grid
    Minimum detectable object (MDO): Parallel beam, 55 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 42
    Высота обнаружения: 2,050 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 7.3 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 224 mA
    Power consumption receiver 3): 226 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,164 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Enclosure rating: IP 65
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.215 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)2)
     
    Арт. 1066192

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 55 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 51
    Высота обнаружения: 2,500 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 8.65 ms
    Рабочий диапазон: 5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 242 mA
    Power consumption receiver 2): 253 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,614 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 6.25 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
    Арт. 1058832

    At a glance

  • Two analog outputs: voltage to current
  • Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
  • Working range up to 8.5 m
  • Detection heights of over 3 m and up to 240 beams possible
  • Short response time of
  • Teach algorithm for optimal sensitivity settings in difficult applications, such as measuring translucent objects
  • Easy-to-use setup software for customized applications with new features
  • Software tools, such as height measurement, zoning, hole detection, and presence control make implementation of complex solutions achievable

    Your benefits

  • Intelligent evaluation software saves costs by quickly and easily turning a standard sensor into a custom problem solver, reducing the number of sensors, PLCs and programming required
  • Easy-to-see status information helps avoid interrupting operation
  • Different beam separation options, detection heights and output configurations ensure a reliable solution
  • Integrated analog outputs reduce integration costs for measuring applications, because no additional software is necessary
  • Discrete outputs for custom solutions without a PLC
  • Tough metal housing stands up to harsh environments and reduces downtime
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO): Parallel beam, 60 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 51
    Высота обнаружения: 2,500 mm
    Конфигурации: Parameterization interface (measuring)
    Performance
    Maximum range 1): 12 m
    Минимальный диапазон Parallel beam: ≥0 mm
    Response time 2): Parallel beam 8.65 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Output type: 2 x Analog
    1 x PNP
    Inputs: 1 x PNP
    Тип подключения: Male connector M12, 8-pin
    IO-Link: -
    Механика/электроника
    Длина волны: Infrared light 880 nm
    Supply voltage Vs: DC 18 V ... 30 V
    Power consumption sender 1): 242 mA
    Power consumption receiver 2): 253 mA
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации: 1 s
    Dimensions (W x H x D): 34 mm x 2,614 mm x 29 mm
    Материал корпуса: Aluminum
    Индикатор: 7-segment display
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 6.25 kg
    Передний экран: PMMA
    Синхронизации: Cable
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -25 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
    Shock load: 10 g / IEC 68-2-29 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx 1)
     
     


    Страницы:
    12
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: