+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

MLG-2 Prime

 
 
Арт. 1213494

At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 30
    Высота обнаружения: 145 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.5 mA
    Power consumption receiver 3): 126 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 223.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1215077

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 30
    Высота обнаружения: 145 mm
    Версия: Prime
    Software features: Inverted: -, Q1: presence detection, Contamination warning, Auto-define height classification, Cross beam
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.5 mA
    Power consumption receiver 3): 126 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 223.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214632

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 30
    Высота обнаружения: 145 mm
    Версия: Prime
    Software features: Inverted: Cross beam, Q1: presence detection, Auto-define height classification, Auto-define height classification, Teach:
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.5 mA
    Power consumption receiver 3): 126 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 223.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214505

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 60
    Высота обнаружения: 295 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 8.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58 mA
    Power consumption receiver 3): 132 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 373.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214693

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 60
    Высота обнаружения: 295 mm
    Версия: Prime
    Software features: Inverted: Standard mode, Q1: presence detection, Auto-define height classification, Auto-define height classification, Teach:
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 8.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58 mA
    Power consumption receiver 3): 132 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 373.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214841

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 90
    Высота обнаружения: 445 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 11.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 59.5 mA
    Power consumption receiver 3): 138 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 523.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.147 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214004

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 90
    Высота обнаружения: 445 mm
    Версия: Prime
    Software features: Inverted:, Q1: presence detection, Auto-define height classification, Auto-define height classification, Teach:
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 11.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 59.5 mA
    Power consumption receiver 3): 138 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 523.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.147 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214447

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 90
    Высота обнаружения: 445 mm
    Версия: Prime
    Software features: Inverted: -, Q1: presence detection, Contamination warning, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 11.2 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 11.2 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 59.5 mA
    Power consumption receiver 3): 138 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 523.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.147 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214821

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 120
    Высота обнаружения: 595 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 14.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 61 mA
    Power consumption receiver 3): 144 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 673.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.447 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213960

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 150
    Высота обнаружения: 745 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 17.3 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 62.5 mA
    Power consumption receiver 3): 150 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 823.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214005

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 150
    Высота обнаружения: 745 mm
    Версия: Prime
    Software features: Inverted:, Q1: presence detection, Auto-define height classification, Auto-define height classification, Teach:
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 17.3 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 62.5 mA
    Power consumption receiver 3): 150 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 823.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214578

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 9 mm
    Расстояние между лучами: 5 mm
    Количество лучей: 390
    Высота обнаружения: 1,945 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 41.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 74.5 mA
    Power consumption receiver 3): 198 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,023.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.147 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213750

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 14 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 15
    Высота обнаружения: 140 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.75 mA
    Power consumption receiver 3): 123 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 223.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213958

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 14 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 30
    Высота обнаружения: 290 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.5 mA
    Power consumption receiver 3): 126 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 373.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214840

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 14 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 45
    Высота обнаружения: 440 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.7 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 57.25 mA
    Power consumption receiver 3): 129 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 523.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.147 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214635

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 14 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 60
    Высота обнаружения: 590 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 8.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58 mA
    Power consumption receiver 3): 132 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 673.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.447 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213539

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 14 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 75
    Высота обнаружения: 740 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 9.7 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58.75 mA
    Power consumption receiver 3): 135 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 823.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214340

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 14 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 150
    Высота обнаружения: 1,490 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 17.3 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 62.5 mA
    Power consumption receiver 3): 150 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 1,573.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.247 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214987

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 14 mm
    Расстояние между лучами: 10 mm
    Количество лучей: 225
    Высота обнаружения: 2,240 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 24.8 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 66.25 mA
    Power consumption receiver 3): 165 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,323.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213513

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 12
    Высота обнаружения: 275 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.6 mA
    Power consumption receiver 3): 122.4 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 373.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214228

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 12
    Высота обнаружения: 275 mm
    Версия: Prime
    Software features: Inverted: -, Q1: presence detection, Contamination warning, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.6 mA
    Power consumption receiver 3): 122.4 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 373.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213503

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 30
    Высота обнаружения: 725 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.5 mA
    Power consumption receiver 3): 126 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 823.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1215082

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 48
    Высота обнаружения: 1,175 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 7 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 57.4 mA
    Power consumption receiver 3): 129.6 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 1,273.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.647 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214983

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 66
    Высота обнаружения: 1,625 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 8.8 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58.3 mA
    Power consumption receiver 3): 133.2 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 1,723.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214930

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 72
    Высота обнаружения: 1,775 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 9.4 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58.6 mA
    Power consumption receiver 3): 134.4 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 1,873.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214818

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 72
    Высота обнаружения: 1,775 mm
    Версия: Prime
    Software features: Inverted: -, Q1: presence detection, Contamination warning, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 9.4 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58.6 mA
    Power consumption receiver 3): 134.4 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 1,873.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214594

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 84
    Высота обнаружения: 2,075 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 10.6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 59.2 mA
    Power consumption receiver 3): 136.8 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,173.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.447 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214368

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 90
    Высота обнаружения: 2,225 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 11.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 59.5 mA
    Power consumption receiver 3): 138 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,323.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214845

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 96
    Высота обнаружения: 2,375 mm
    Версия: Prime
    Software features: Inverted: -, Q1: presence detection, Contamination warning, Auto-define height classification, Cross beam
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 11.8 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 59.8 mA
    Power consumption receiver 3): 139.2 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,473.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.047 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213979

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 29 mm
    Расстояние между лучами: 25 mm
    Количество лучей: 126
    Высота обнаружения: 3,125 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 14.8 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 61.3 mA
    Power consumption receiver 3): 145.2 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 3,223.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 6.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213711

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 6
    Высота обнаружения: 250 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.3 mA
    Power consumption receiver 3): 121.2 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 373.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 0.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214752

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 9
    Высота обнаружения: 400 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.45 mA
    Power consumption receiver 3): 121.8 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 523.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.147 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213998

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 12
    Высота обнаружения: 550 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.6 mA
    Power consumption receiver 3): 122.4 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 673.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.447 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214599

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 15
    Высота обнаружения: 700 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.75 mA
    Power consumption receiver 3): 123 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 823.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 1.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214600

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 18
    Высота обнаружения: 850 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 55.9 mA
    Power consumption receiver 3): 123.6 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 973.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.047 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214156

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 21
    Высота обнаружения: 1,000 mm
    Версия: Prime
    Software features: Inverted:, Q1: presence detection, Auto-define height classification, Auto-define height classification, Teach:
    Performance
    Maximum range 1): 11.2 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.05 mA
    Power consumption receiver 3): 124.2 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 1,123.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 2.347 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213540

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 36
    Высота обнаружения: 1,750 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.1 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.8 mA
    Power consumption receiver 3): 127.2 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 1,873.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 3.847 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214707

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 39
    Высота обнаружения: 1,900 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.2 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 56.95 mA
    Power consumption receiver 3): 127.8 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,023.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.147 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214603

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 42
    Высота обнаружения: 2,050 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.4 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 57.1 mA
    Power consumption receiver 3): 128.4 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,173.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.447 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214523

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 42
    Высота обнаружения: 2,050 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 11.2 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.4 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 57.1 mA
    Power consumption receiver 3): 128.4 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,173.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.447 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214268

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 45
    Высота обнаружения: 2,200 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.7 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 57.25 mA
    Power consumption receiver 3): 129 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,323.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214457

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 45
    Высота обнаружения: 2,200 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 11.2 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 6.7 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 57.25 mA
    Power consumption receiver 3): 129 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,323.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 4.747 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1215022

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 54
    Высота обнаружения: 2,650 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 7.6 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 57.7 mA
    Power consumption receiver 3): 130.8 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 2,773.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 5.647 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1213510

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 63
    Высота обнаружения: 3,100 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 7 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 8.5 ms
    Рабочий диапазон: 5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58.15 mA
    Power consumption receiver 3): 132.6 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 3,223.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 6.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
    Арт. 1214045

    At a glance

  • High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm
  • Available with three push-pull switching outputs or two analog outputs
  • Display configuration with selected, pre-programmed measuring functions
  • Monitoring height up to 3.2 m
  • Operating range up to 8.5 m
  • Optical synchronization of sender and receiver
  • Cloning function via IO-Link
  • Temperature range from -30 °C to +55 °C

    Your benefits

  • Easy concept: Time and cost savings due to simple configuration and quick commissioning
  • Modular concept offers the perfect solution every time from a single source
  • Two optical synchronization beams increase operational safety
  • Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link
  • Direct configuration on the device display for quick commissioning
  • IO-Link as an interface for configuration, measured data transfer and diagnostics
  • Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions
  • Extremely high operational safety due to rugged aluminum housing
    Features
    Технологии: Sender/receiver
    Minimum detectable object (MDO) 1)2): 54 mm
    Расстояние между лучами: 50 mm
    Количество лучей: 63
    Высота обнаружения: 3,100 mm
    Версия: Prime
    Software features: Inverted: -, Q1: Auto-define height classification, Auto-define height classification, Auto-define height classification, Standard teach
    Performance
    Maximum range 1): 11.2 m
    Минимальный диапазон ≥0 mm
    Response time 2)3): 8.5 ms
    Рабочий диапазон: 8.5 m
    Interfaces
    Интерфейс передачи данных: 3 x Q (IO-Link)
    Тип подключения: Connector M12, 5-pin
    IO-Link:
    Механика/электроника
    Длина волны: 850 nm
    Supply voltage Vs 1): DC 18 V ... 30 V
    Power consumption sender 2): 58.15 mA
    Power consumption receiver 3): 132.6 mA
    Пульсации:
    Output current Imax.: 100 mA
    Output load capacitive: 100 nF
    Выходная нагрузка индуктивная: 1 H
    Время инициализации:
    Dimensions (W x H x D): 34 mm x 3,223.3 mm x 30.6 mm
    Материал корпуса: Aluminum
    Индикатор: LED
    Enclosure rating: IP 65, IP 67
    Защита цепи: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Вес: 6.547 kg
    Передний экран: PMMA
    Option: Nonexistent
    Данные окуражающей среды
    Класс защиты: III
    EMC: EN 60947-5-2
    Ambient temperature: Operation: -30 ... +55 °C, Storage: -40 ... +70 °C
    Виброустойчивость: 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64)
    Shock load: 15 g / DIN EN 60 068-2-27 / 16 ms
    Устойчивость к освещенности окружающей среды: Direct: ≥12,500 lx, Indirect: ≥50,000 lx
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: