At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 9 mm |
||
Расстояние между лучами: | 5 mm | ||
Количество лучей: | 30 | ||
Высота обнаружения: | 145 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.1 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 56.5 mA | ||
Power consumption receiver 3): | 126 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 223.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 0.547 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 9 mm |
||
Расстояние между лучами: | 5 mm | ||
Количество лучей: | 60 | ||
Высота обнаружения: | 295 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 8.2 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 58 mA | ||
Power consumption receiver 3): | 132 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 373.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 0.847 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 9 mm |
||
Расстояние между лучами: | 5 mm | ||
Количество лучей: | 90 | ||
Высота обнаружения: | 445 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 11.2 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 59.5 mA | ||
Power consumption receiver 3): | 138 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 523.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 1.147 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 9 mm |
||
Расстояние между лучами: | 5 mm | ||
Количество лучей: | 150 | ||
Высота обнаружения: | 745 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 17.3 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 62.5 mA | ||
Power consumption receiver 3): | 150 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 823.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 1.747 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 9 mm |
||
Расстояние между лучами: | 5 mm | ||
Количество лучей: | 180 | ||
Высота обнаружения: | 895 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Cross beam |
Performance | |||
Maximum range 1): | 11.2 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 20.3 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 64 mA | ||
Power consumption receiver 3): | 156 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 973.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.047 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 14 mm |
||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 30 | ||
Высота обнаружения: | 290 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.1 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 56.5 mA | ||
Power consumption receiver 3): | 126 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 373.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 0.847 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 14 mm |
||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 75 | ||
Высота обнаружения: | 740 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 9.7 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 58.75 mA | ||
Power consumption receiver 3): | 135 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 823.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 1.747 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 14 mm |
||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 90 | ||
Высота обнаружения: | 890 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 11.2 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 59.5 mA | ||
Power consumption receiver 3): | 138 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 973.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.047 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 14 mm |
||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 105 | ||
Высота обнаружения: | 1,040 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 12.7 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 60.25 mA | ||
Power consumption receiver 3): | 141 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 1,123.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.347 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 14 mm |
||
Расстояние между лучами: | 10 mm | ||
Количество лучей: | 255 | ||
Высота обнаружения: | 2,540 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 27.9 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 67.75 mA | ||
Power consumption receiver 3): | 171 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 2,623.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 5.347 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 29 mm |
||
Расстояние между лучами: | 25 mm | ||
Количество лучей: | 12 | ||
Высота обнаружения: | 275 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 55.6 mA | ||
Power consumption receiver 3): | 122.4 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 373.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 0.847 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 29 mm |
||
Расстояние между лучами: | 25 mm | ||
Количество лучей: | 24 | ||
Высота обнаружения: | 575 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.1 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 56.2 mA | ||
Power consumption receiver 3): | 124.8 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 673.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 1.447 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 29 mm |
||
Расстояние между лучами: | 25 mm | ||
Количество лучей: | 42 | ||
Высота обнаружения: | 1,025 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.4 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 57.1 mA | ||
Power consumption receiver 3): | 128.4 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 1,123.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.347 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 29 mm |
||
Расстояние между лучами: | 25 mm | ||
Количество лучей: | 54 | ||
Высота обнаружения: | 1,325 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 7.6 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 57.7 mA | ||
Power consumption receiver 3): | 130.8 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 1,423.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.947 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 29 mm |
||
Расстояние между лучами: | 25 mm | ||
Количество лучей: | 72 | ||
Высота обнаружения: | 1,775 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 9.4 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 58.6 mA | ||
Power consumption receiver 3): | 134.4 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 1,873.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 3.847 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 29 mm |
||
Расстояние между лучами: | 25 mm | ||
Количество лучей: | 90 | ||
Высота обнаружения: | 2,225 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 11.2 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 59.5 mA | ||
Power consumption receiver 3): | 138 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 2,323.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.747 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 54 mm |
||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 18 | ||
Высота обнаружения: | 850 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.1 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 55.9 mA | ||
Power consumption receiver 3): | 123.6 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 973.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.047 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 54 mm |
||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 24 | ||
Высота обнаружения: | 1,150 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.1 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 56.2 mA | ||
Power consumption receiver 3): | 124.8 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 1,273.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 2.647 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 54 mm |
||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 30 | ||
Высота обнаружения: | 1,450 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.1 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 56.5 mA | ||
Power consumption receiver 3): | 126 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 1,573.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 3.247 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 54 mm |
||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 45 | ||
Высота обнаружения: | 2,200 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 7 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.7 ms | ||
Рабочий диапазон: | 5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 57.25 mA | ||
Power consumption receiver 3): | 129 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 2,323.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.747 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
At a glance
High-resolution light grid: Available with beam separation of 5 mm, 10 mm, 25 mm, and 50 mm |
Available with three push-pull switching outputs or two analog outputs |
Display configuration with selected, pre-programmed measuring functions |
Monitoring height up to 3.2 m |
Operating range up to 8.5 m |
Optical synchronization of sender and receiver |
Cloning function via IO-Link |
Temperature range from -30 °C to +55 °C |
Your benefits
Easy concept: Time and cost savings due to simple configuration and quick commissioning |
Modular concept offers the perfect solution every time from a single source |
Two optical synchronization beams increase operational safety |
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link |
Direct configuration on the device display for quick commissioning |
IO-Link as an interface for configuration, measured data transfer and diagnostics |
Minimal specialist knowledge required by the user thanks to the intuitive arrangement of the most essential functions |
Extremely high operational safety due to rugged aluminum housing |
Features | |||
Технологии: | Sender/receiver | ||
Minimum detectable object (MDO) 1)2): | 54 mm |
||
Расстояние между лучами: | 50 mm | ||
Количество лучей: | 45 | ||
Высота обнаружения: | 2,200 mm | ||
Версия: | Prime | ||
Software features: | Inverted: -, Q1: presence detection, Height measurement (first beam)/FBB, Height measurement (last beam)/LBB, Standard teach |
Performance | |||
Maximum range 1): | 11.2 m | ||
Минимальный диапазон | ≥0 mm | ||
Response time 2)3): | 6.7 ms | ||
Рабочий диапазон: | 8.5 m |
Interfaces | |||
Интерфейс передачи данных: | 2 x Analog + 1 x Q (IO-Link) | ||
Тип подключения: | Connector M12, 5-pin | ||
IO-Link: | ![]() |
Механика/электроника | |||
Длина волны: | 850 nm | ||
Supply voltage Vs 1): | DC 18 V ... 30 V | ||
Power consumption sender 2): | 57.25 mA | ||
Power consumption receiver 3): | 129 mA | ||
Пульсации: | |||
Output current Imax.: | 100 mA | ||
Output load capacitive: | 100 nF | ||
Выходная нагрузка индуктивная: | 1 H | ||
Время инициализации: | |||
Dimensions (W x H x D): | 34 mm x 2,323.3 mm x 30.6 mm | ||
Материал корпуса: | Aluminum | ||
Индикатор: | LED | ||
Enclosure rating: | IP 65, IP 67 | ||
Защита цепи: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Вес: | 4.747 kg | ||
Передний экран: | PMMA | ||
Option: | Nonexistent |
Данные окуражающей среды | |||
Класс защиты: | III | ||
EMC: | EN 60947-5-2 | ||
Ambient temperature: | Operation: -30 ... +55 °C, Storage: -40 ... +70 °C | ||
Виброустойчивость: | 5 g, 10 Hz ... 55 Hz (EN 60 068-2-64) | ||
Shock load: | 15 g / DIN EN 60 068-2-27 / 16 ms | ||
Устойчивость к освещенности окружающей среды: | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |