Страницы:
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Spring mounting plate | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 3,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 15 mm | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 50 gcm² | ||
| Maximum operating speed: | 3,000 /min | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 1.8 Ncm | ||
| Крутящий момент на старте: | 2.6 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.3 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.5 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.1 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Тип подключения: | Connector MS/10 10-pin | ||
| Shaft version: | Blind hollow shaft | ||
| GEWICHT01: | 0.48 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | 0 °C ... +75 °C | ||
| Storage temperature range: | -40 °C ... +85 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 9.5 mm | ||
| Тип фланца/муфты статора: | Square flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 28.8 gcm² | ||
| Maximum operating speed: | 3,000 /min (with shaft seal), 6,000 /min (without shaft seal) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector MS/10 10-pin | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 155 N (radial), 88 N (axial) | ||
| GEWICHT01: | 0.48 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | 0 °C ... +75 °C | ||
| Storage temperature range: | -40 °C ... +85 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 9.5 mm | ||
| Тип фланца/муфты статора: | Square flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 28.8 gcm² | ||
| Maximum operating speed: | 3,000 /min (with shaft seal), 6,000 /min (without shaft seal) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector MS/10 10-pin | ||
| Shaft version: | Solid shaft with flat | ||
| Permissible Load capacity of shaft: | 155 N (radial), 88 N (axial) | ||
| GEWICHT01: | 0.48 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | 0 °C ... +75 °C | ||
| Storage temperature range: | -40 °C ... +85 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 10 mm | ||
| Тип фланца/муфты статора: | Face mount flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 10 mm | ||
| Тип фланца/муфты статора: | Face mount flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 10 mm | ||
| Тип фланца/муфты статора: | Face mount flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 10 mm | ||
| Тип фланца/муфты статора: | Face mount flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 6 mm | ||
| Тип фланца/муфты статора: | Servo flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 6 mm | ||
| Тип фланца/муфты статора: | Servo flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 6 mm | ||
| Тип фланца/муфты статора: | Servo flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) | ||
| Mechanical data | |||
| Диаметр вала: | 6 mm | ||
| Тип фланца/муфты статора: | Servo flange | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 25 gcm² | ||
| Maximum operating speed: | 6,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 1 Ncm | ||
| Крутящий момент на старте: | 1.5 Ncm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Solid shaft | ||
| Permissible Load capacity of shaft: | 20 N (axial), 40 N (radial) | ||
| GEWICHT01: | 0.55 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +85 °C | ||
| Storage temperature range: | -30 °C ... +90 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 30 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Rubber support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Rubber support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Rubber support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Rubber support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Spring mounting plate | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Spring mounting plate | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Spring mounting plate | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Spring mounting plate | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.5 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Connector, 8-pin | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 128 Byte, 128 Byte (E2PROM 512) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
At a glance
| Motor feedback systems for the top performance range |
| 1,024 sine/ cosine periods per revolution |
| Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system |
| HIPERFACE® interface: Programming of the position value and electronic type label |
| Insert shaft or tapered shaft with various torque supports |
| Integrated version, mounted version or stand-alone design |
| Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...) |
| Conforms to RoHs |
Your benefits
| Motor feedback system with HIPERFACE® interface |
| High shock/vibration resistance thanks to built-in metal code disk |
| Consistent motor design due to identical size of single and multiturn design |
| To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified. |
| Very smooth running thanks to maximum ball bearing distance |
| Safety-related parameters | |||
| Safety integrity level: | SIL2 (IEC 61508), SILCL2 (IEC 62061) | ||
| Category: | 3 (EN ISO 13849) | ||
| Уровень производительности: | PL d EN ISO 13849 1) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Максимальная интенсивность запросов: | Continuous (analog signals) | ||
| PFHD: probability of dangerous failure per hour: | 1.0 * 1E-08 2) | ||
| MTTFd: mean time to dangerous failure: | 1,073 a (EN ISO 13849) | ||
| Performance | |||
| Number of sine/cosine periods per revolution: | 1,024 | ||
| Number of the absolute ascertainable revolutions: | 1 (Singleturn) | ||
| Total number of steps: | 32,768 | ||
| Шаг измерения: | 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit | ||
| Differential non-linearity: | ± 7 angular seconds (Non-linearity within a sine/cosine period) | ||
| Operating speed: | 6,000 /min, up to which the absolute position can be reliably produced | ||
| Available memory area: | 1,792 Byte, 1,792 Byte (E2PROM 2048) | ||
| Integral non-linearity typ.: | ± 45 angular seconds (Error limits for evaluating sine/cosine period) without mechanical tension of the stator coupling |
||
| Mechanical data | |||
| Тип фланца/муфты статора: | Resolver support | ||
| Dimensions: | See dimensional drawing | ||
| Moment of inertia of the rotor: | 10 gcm² | ||
| Maximum operating speed: | 12,000 /min | ||
| Maximum angular acceleration: | 200,000 rad/s² | ||
| Момент вращения: | 0.2 Ncm | ||
| Крутящий момент на старте: | 0.4 Ncm | ||
| Допустимое перемещение вала, радиальное статические: | ± 0.25 mm | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Допустимое перемещение вала, аксиальное, статическое: | ± 0.75 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.6 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 200 mm | ||
| Shaft version: | Tapered shaft | ||
| Angular motion perpendicular to the rotational axis, static: | ± 0.005 mm/mm | ||
| Angular motion perpendicular to the rotational axis, dynamic: | ± 0.002 mm/mm | ||
| GEWICHT01: | 0.2 kg | ||
| Electrical data | |||
| Electrical interface: | HIPERFACE | ||
| Operating voltage range/supply Voltage: | 7 V DC ... 12 V DC | ||
| Recommended supply voltage: | 8 V DC | ||
| Output frequency for sine/cosine signals: | 0 kHz ... 200 kHz | ||
| Номинальная потребляемая мощность (без нагрузки): | 80 mA 1) | ||
| Interfaces | |||
| Type of code for the absolute value: | Binary | ||
| Кодовая последовательность: | Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) | ||
| Interface signals: | Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... +115 °C | ||
| Storage temperature range: | -40 °C ... +125 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, Condensation not permitted | ||
| Устойчивость к ударам: | 100 g / 10 ms / according to EN 60068-2-27 | ||
| Resistance to vibration: | 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6 | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 40 (according to IEC 60529), with mating connector inserted | ||
Страницы: