+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

Магнитные датчики для пневмоцилиндров с T-пазом

Главная » Каталог » SICK » Магнитные датчики для пневмоцилиндров » Магнитные датчики для пневмоцилиндров с T-пазом
 
 
Страницы:
123
 



Арт. 1069395

At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: NPN
    Output function: NC
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: 20 ms pulse streching (off delay)
    Enclosure rating: IP 68 1)2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044932

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: NPN
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044935

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: NPN
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1069394

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: NPN
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: 20 ms pulse streching (off delay)
    Enclosure rating: IP 68 1)2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044934

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: NPN
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1068912

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: ± 1,000 Hz
    Output type: NPN
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044468

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: NPN
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PVC
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1060429

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: ± 1,000 Hz
    Output type: PNP
    Output function: NC
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 10 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044930

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NC
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1069393

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NC
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: 20 ms pulse streching (off delay)
    Enclosure rating: IP 68 1)2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044931

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NC
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044458

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1053415

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: With 2 label markings
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044461

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.75 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044460

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M12, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1058317

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M12, 3-pin, 1 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1073407

    At a glance

  • Variants fulfill the requirements of ATEX categories 1D, 1G and 3D, 3G
  • Combination screw for quick mounting
  • Enclosure rating: IP 67
  • Very short sensor housing for use in short stroke cylinders
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Optimum explosion protection: NAMUR version for ATEX category 1D, 1G
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 67 1)
    Механика/электроника
    Тип подключения: Cable with connector M12, 3-pin, with knurled nuts, 0.3 m
    Supply voltage: 10 V DC ... 26 V DC 1)
    Потребляемая мощность: ≤ 10 mA 2)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 50 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Device labeling: II 3D Ex tc IIIC T135 °C Dc X, II 3G Ex nA op is IIC T4 Gc X
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 3)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +50 °C
    Ex area category: 3D, 3G
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044459

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1046374

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: With 2 label markings
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048503

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044463

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044464

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: ± 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048502

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: With 2 label markings
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1067400

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: ± 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PVC
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1069392

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: 20 ms pulse streching (off delay)
    Enclosure rating: IP 68 1)2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1073406

    At a glance

  • Variants fulfill the requirements of ATEX categories 1D, 1G and 3D, 3G
  • Combination screw for quick mounting
  • Enclosure rating: IP 67
  • Very short sensor housing for use in short stroke cylinders
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Optimum explosion protection: NAMUR version for ATEX category 1D, 1G
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 67 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.3 m
    Supply voltage: 10 V DC ... 26 V DC 1)
    Потребляемая мощность: ≤ 10 mA 2)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 50 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Device labeling: II 3D Ex tc IIIC T135 °C Dc X, II 3G Ex nA op is IIC T4 Gc X
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 3)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +50 °C
    Ex area category: 3D, 3G
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044469

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044466

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044470

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1054051

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 10 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1054237

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1054238

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 3.6 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1044349

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 67, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PVC
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048314

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 67, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PVC
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1073405

    At a glance

  • Variants fulfill the requirements of ATEX categories 1D, 1G and 3D, 3G
  • Combination screw for quick mounting
  • Enclosure rating: IP 67
  • Very short sensor housing for use in short stroke cylinders
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Optimum explosion protection: NAMUR version for ATEX category 1D, 1G
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 67 1)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 26 V DC 1)
    Потребляемая мощность: ≤ 10 mA 2)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 50 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PVC
    Сечение провода: 0.12 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Device labeling: II 3D Ex tc IIIC T135 °C Dc X, II 3G Ex nA op is IIC T4 Gc X
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 3)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -20 °C ... +50 °C
    Ex area category: 3D, 3G
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1053014

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 1.9 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1071438

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 1.9 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1068535

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: NPN
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048048

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1054250

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: 50 pieces package, With 2 label markings
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048051

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M12, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1058311

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M12, 3-pin, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048050

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048174

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: With 2 label markings
    Enclosure rating: IP 68 1)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, with knurled nuts, 0.5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1048049

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1057030

    At a glance

  • High-temperature variants: temperature-resistant up to 100 °C
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • PNP or NPN switching output, PUR or PVC cable, M8 or M12 connection can be selected
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Can be used in temperatures up to 100 °C
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Enclosure rating: IP 67, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PVC
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 9 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: > 0.5 mT
    Response sensitivity, typ.: 2.8 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1073264

    At a glance

  • Yellow LED as visual installation aid and switching status indicator
  • Status indicated via green LED
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Simple installation and monitoring of the assembly position via yellow LED
  • Status indicated via additional high-power green LED
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps.
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: Visual installation aid/LED indicator (yellow), Power LED (green)
    Enclosure rating: IP 68 1)2)
    Механика/электроника
    Тип подключения: Cable with connector M8, 3-pin, 0.3 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1073265

    At a glance

  • Yellow LED as visual installation aid and switching status indicator
  • Status indicated via green LED
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Simple installation and monitoring of the assembly position via yellow LED
  • Status indicated via additional high-power green LED
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps.
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: Visual installation aid/LED indicator (yellow), Power LED (green)
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 2 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1073266

    At a glance

  • Yellow LED as visual installation aid and switching status indicator
  • Status indicated via green LED
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Simple installation and monitoring of the assembly position via yellow LED
  • Status indicated via additional high-power green LED
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps.
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: Visual installation aid/LED indicator (yellow), Power LED (green)
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 5 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
    Арт. 1073267

    At a glance

  • Yellow LED as visual installation aid and switching status indicator
  • Status indicated via green LED
  • Combination screw for quick mounting
  • Enclosure ratings: IP 67, IP 68, IP 69K
  • Very short sensor housing for use in short stroke cylinders
  • Can be used in all cylinders, linear slides, and grippers with T-slots and with many round body, tie-rod, and dove-tail groove cylinders using an adapter

    Your benefits

  • Simple installation and monitoring of the assembly position via yellow LED
  • Status indicated via additional high-power green LED
  • Very rugged housing with enclosure rating IP 67, IP 68, or IP 69K extends the service life of the sensor
  • Increases machine performance thanks to precise, single switching
  • Quick and easy mounting using Allen wrench or flat head screwdriver
  • Saves time during initial installation and when replacing the device, as the sensor is very easy to insert in the slot from above. No need to dismantle the cylinder end caps.
  • Low maintenance costs, as the sensor is resistant to shocks and vibrations and therefore does not move out of its position in the slot
    Features
    Switching frequency, typ.: 1,000 Hz
    Output type: PNP
    Output function: NO
    Electrical wiring: DC 3-wire
    Cylinder type: T-slot
    Cylinder types with adapter: Profile cylinder
    Round body cylinder
    SMC rail CDQ2
    SMC rail ECDQ2
    Tie rod cylinder
    Dove-tail groove cylinder
    Длина корпуса: 24 mm
    Special features: Visual installation aid/LED indicator (yellow), Power LED (green)
    Enclosure rating: IP 68, IP 69K 1)2)
    Механика/электроника
    Тип подключения: Cable, 3-wire, 10 m
    Supply voltage: 10 V DC ... 30 V DC
    Потребляемая мощность: ≤ 10 mA 1)
    Падение напряжения: ≤ 2.2 V
    Непрерывный ток Ia: ≤ 200 mA
    EMC: According to EN 60947-5-2
    Материал кабеля: PUR
    Сечение провода: 0.14 mm²
    Защита от обратной полярности:
    защита от короткого замыкания:
    Материал корпуса крышки: PA12
    Импульсная защита:
    Повторяемость: ≤ 0.1 mT 2)
    Overrun distance, typ.: 3 mm
    Ударная и вибрационная устойчивость: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
    Ambient operating temperature: -30 °C ... +80 °C
    Класс защиты: III
    Hysteresis, typ.: ≤ 0.5 mT
    Response sensitivity, typ.: 2.6 mT
    Материал корпуса: Plastic
    UL File No.: NRKH.E181493
     
     


    Страницы:
    123
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: