A wide selection of cables and wiring products, brackets, corner mirrors and enclosures.
- Power supplies allow dc safety devices to function in ac environments.
- PSDINA-24 DIN-mountable power supply converts 115/230V ac voltage to 24V dc for powering dc devices.
- AC Interface Boxes connect EZ-SCREEN safety light screens and EZ-SCREEN Grids and Points to AC power.
A manually operated safety control device which, when continuously activated and used in conjunction with a separate actuating control, will allow the machine to function in manual operating mode.
- Three-position functionality (OFF-ON-OFF) as required for manual control of a machine
- Provides safety function when user either squeezes or releases the handlegrip switch
- Ergonomic design with a detented enable position (position 2)
- Terminal 1-2 and 3-4 contacts will not re-close when released from fully squeezed (position 3)
- Ideally suited for use as an enabling device for robotic cells
- Optional momentary pushbutton switch (depending on model) that can provide hold-to-run, reset, or jogging/inching functions
- Built-in strain relief and M20x1.5 conduit connection
- Meets IP65 or IP66, depending on model
- Insulated device (IEC 60947-5-1) on all models
- Design meets or exceeds: ANSI RIA R15.06 and ISO 10218 Robot safety standard; ANSI B11.19 Performance Criteria for Safeguards; ANSI NFPA 79 (2007) and IEC 60204-1 (2000) Electrical Requirements for Industrial Machines
- Broad offering of bracket styles makes it easy to install sensors vertically, horizontally or diagonally.
- Swivel brackets offer greater range of motion.
- Adapter brackets provide mounting flexibility.
- Retrofit brackets enable you use existing mounting holes when installing a different emitter/receiver.
- Replacement brackets are available for brackets included with emitters/receivers.
- Quick-disconnect (QD) cables allow safety devices to be installed, replaced or moved quickly, minimizing down-time.
- Euro-, Mini and Micro-style cables are available.
- Choose straight or right-angle connectors.
- Models are available with single or double-ended QD connectors, or as unterminated bulk cable.
- Splitter cables are available for powering two devices with one cable.
Designed for enclosure or area lighting to illuminate a large area with an even pattern of light and no shadows.
- Designed for enclosure or area lighting; use with an optional flex arm mount for adjustable, industrial task lighting
- Standard or push-button models available
- Flat-mount or 30 mm base-mount models available
- Rugged, sealed polycarbonate housing rated to IP69K (standard models) or IP67 (push-button models)
- 12 to 30V dc operation
- Cabled and quick-disconnect models available
- Low power consumption; less than 3 watts