+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

Through-beam photoelectric sensor

 
 
Страницы:
12
 



Арт. 6026025

At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Dark switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026038

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Dark switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026026

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Light switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026039

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Light switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6037862

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6039733

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable with MOLEX-connector, 200 mm 7)
    Материал кабеля: PVC
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device:
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6036513

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026027

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6028690

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device:
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026040

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6039627

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device:
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 stainless steel mounting brackets (1.4301/304) BEF-W100-B
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026031

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Dark switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026044

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Dark switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026033

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Light switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026045

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Light switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6037863

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    UL File No.: NRKH2.E300503 & NRKH8.E300503
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6036514

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    UL File No.: NRKH2.E300503 & NRKH8.E300503
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026034

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026046

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6028584

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Dark switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6028590

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Dark switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6028585

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Light switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6028591

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Light switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6037864

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    UL File No.: NRKH2.E300503 & NRKH8.E300503
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6036515

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    UL File No.: NRKH2.E300503 & NRKH8.E300503
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6028586

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6028592

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: NPN, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage NPN HIGH/LOW: Approx. VS /
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026028

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Dark switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026041

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Dark switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6028497

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Dark switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 5 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device:
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026029

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Light switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026042

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Light switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6037865

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6036516

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6038568

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable with connector M8, 3-pin, 200 mm 7)
    Материал кабеля: PVC
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device:
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026030

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026043

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6039628

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Cable, 3-wire, 2 m 7)
    Материал кабеля: PVC
    Сечение провода: 0.18 mm²
    Защита цепи: A, B, D 8)9)10)
    Вес: 106 g
    Поляризационный фильтр: -
    Special device:
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 stainless steel mounting brackets (1.4301/304) BEF-W100-B
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026035

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Dark switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026047

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Dark switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026036

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Light switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6026048

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Light switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6037866

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    UL File No.: NRKH2.E300503 & NRKH8.E300503
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6036517

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 30 m
    Диапазон измерений: 0 m ... 20 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 645 nm
    Angle of dispersion: Ca. 2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 800 mm (20 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 67
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    UL File No.: NRKH2.E300503 & NRKH8.E300503
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026037

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6026049

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Регулировки: Potentiometer, 270 °
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Светлое/темное переключение
    Режим переключения селектора: Manually selectable
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 3-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC/POM, Plastic
     
    Арт. 6028587

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Dark switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6028593

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Dark switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6028588

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Light switching
    Output current Imax.: ≤ 100 mA
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 Hz 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
    Арт. 6028594

    At a glance

  • Standard miniature housing with M3 threaded mounting holes
  • Optics with standard red LED or bright light LED
  • Connector and cable versions
  • Light/dark switching and sensitivity adjustment via rotary switch possible
  • Various versions are available, including through-beam, retro-reflective, energetic and background suppression
  • Wide variety of accessories available

    Your benefits

  • Highly visible light spot simplifies alignment
  • Reliable detection of glossy objects at a close range with WL100 bright light models
  • Less contamination due to high optical operating reserve
  • M3 threaded mounting holes provide quick and easy installation

    Product will be phased out and can be ordered until 31.12.2015.

    Features
    Sensor/detection principle: Through-beam photoelectric sensor
    Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
    Housing design (light emission): Rectangular
    Sensing range max.: 0 m ... 15 m
    Диапазон измерений: 0 m ... 12 m
    Type of light: Visible red light
    Источник света: LED 1)
    Длина волны: 680 nm
    Angle of dispersion: Ca. 7.2 °
    Focus adjustable: -
    Light spot size (distance): Ø 1,500 mm (12 m)
    Механика/электроника
    Supply voltage: 10 V DC ... 30 V DC 1)
    Пульсации: ± 10 % 2)
    Power consumption, sender: ≤ 15 mA 3)
    Power consumption, receiver: ≤ 20 mA 4)
    Output type: PNP, open collector
    Режим переключения: Light switching
    Output current Imax.: 100
    Response time: ≤ 0.5 ms 5)
    Частота переключений: 1,000 6)
    Angle of reception: Ca. 15 °
    Тип подключения: Connector M8, 4-pin
    Защита цепи: A, B, D 7)8)9)
    Вес: 18 g
    Поляризационный фильтр: -
    Special device: -
    Материал оптики: PMMA
    Enclosure rating: IP 65
    Items supplied: 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature: -25 °C ... +55 °C
    Температура хранения: -40 °C ... +70 °C
    Signal voltage PNP HIGH/LOW: UV - 1,8 V / ca. 0 V
    Материал корпуса: ABS/PC, Plastic
     
     


    Страницы:
    12
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: