At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Low switching hysteresis for detecting transparent objects with min. 20% attenuation in the light path |
Your benefits
Reliable detection with regard to transparent objects with attenuation in the light path of min. 20% |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Clear material detection | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 140 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | ≥ 20 % | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Without reverse polarity protection diode | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Low switching hysteresis for detecting transparent objects with min. 20% attenuation in the light path |
Your benefits
Reliable detection with regard to transparent objects with attenuation in the light path of min. 20% |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Clear material detection | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 140 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | ≥ 20 % | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Low switching hysteresis for detecting transparent objects with min. 20% attenuation in the light path |
Your benefits
Reliable detection with regard to transparent objects with attenuation in the light path of min. 20% |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Clear material detection | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 140 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | ≥ 20 % | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 3 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Fix | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector M12, 4-pin, 290 mm 6) | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector M12, 4-pin, 300 mm 6) | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector M8, 4-pin, 300 mm | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Low switching hysteresis for detecting transparent objects with min. 20% attenuation in the light path |
Your benefits
Reliable detection with regard to transparent objects with attenuation in the light path of min. 20% |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Clear material detection | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 140 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | ≥ 20 % | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector M8, 4-pin, 200 mm | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector M12, 4-pin, 310 mm 6) | ||
Защита цепи: | A, B, D 7)8)9) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Low switching hysteresis for detecting transparent objects with min. 20% attenuation in the light path |
Your benefits
Reliable detection with regard to transparent objects with attenuation in the light path of min. 20% |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Clear material detection | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 140 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | ≥ 20 % | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6.3 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Higher switching frequency, Switching mode selector via cable | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Dark switching | ||
Режим переключения селектора: | Via cable | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.25 ms 4) | ||
Частота переключений: | 2,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6.3 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.25 ms 4) | ||
Частота переключений: | 2,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Low switching hysteresis for detecting transparent objects with min. 20% attenuation in the light path |
Your benefits
Reliable detection with regard to transparent objects with attenuation in the light path of min. 20% |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Special features: | Clear material detection | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 140 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | ≥ 20 % | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with integrated M3 threaded mounting holes |
Bright emitted light spot and clearly visible indicator LEDs |
Light/dark switching and sensitivity adjustment possible |
Long sensing ranges of up to 7.2Â m on PL80A reflector |
Your benefits
Long sensing ranges of up to 7.2Â m thanks to a high functional reserve |
Straightforward alignment thanks to bright light spot and clearly visible indicator LEDs |
Compatibility with a number of common mounting systems due to standard housing with 1-inch hole spacing and integrated M3 threaded mounting hole |
Highly reliable and durable despite optical interference and mechanical loads |
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 7.2 m 1) | ||
Диапазон измерений: | 0.01 m ... 5.5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 632 nm | ||
Регулировки: | Potentiometer | ||
Light spot size (distance): | Ø 280 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Selectable via light/dark rotary switch | ||
Output current Imax.: | 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Класс защиты: | III | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC/POM, Plastic |