+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

SRS/SRM50

 
 
Страницы:
12
 



Арт. 1037063

At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037064

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037065

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037066

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037087

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037088

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037089

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037090

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037071

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037072

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037073

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037074

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037079

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037080

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037081

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037082

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 7127314

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 3,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 15 mm
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 50 gcm²
    Maximum operating speed: 3,000 /min
    Maximum angular acceleration: 500,000 rad/s²
    Момент вращения: 1.8 Ncm
    Крутящий момент на старте: 2.6 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.5 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.1 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Тип подключения: Connector MS/10 10-pin
    Shaft version: Blind hollow shaft
    GEWICHT01: 0.48 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: 0 °C ... +75 °C
    Storage temperature range: -40 °C ... +85 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529), with mating connector inserted
     
    Арт. 7127313

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 9.5 mm
    Тип фланца/муфты статора: Square flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 28.8 gcm²
    Maximum operating speed: 3,000 /min (with shaft seal), 6,000 /min (without shaft seal)
    Maximum angular acceleration: 500,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector MS/10 10-pin
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 155 N (radial), 88 N (axial)
    GEWICHT01: 0.48 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: 0 °C ... +75 °C
    Storage temperature range: -40 °C ... +85 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529), with mating connector inserted
     
    Арт. 7127311

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 9.5 mm
    Тип фланца/муфты статора: Square flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 28.8 gcm²
    Maximum operating speed: 3,000 /min (with shaft seal), 6,000 /min (without shaft seal)
    Maximum angular acceleration: 500,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector MS/10 10-pin
    Shaft version: Solid shaft with flat
    Permissible Load capacity of shaft: 155 N (radial), 88 N (axial)
    GEWICHT01: 0.48 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: 0 °C ... +75 °C
    Storage temperature range: -40 °C ... +85 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037095

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 10 mm
    Тип фланца/муфты статора: Face mount flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037096

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 10 mm
    Тип фланца/муфты статора: Face mount flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037097

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 10 mm
    Тип фланца/муфты статора: Face mount flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037098

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 10 mm
    Тип фланца/муфты статора: Face mount flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037103

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 6 mm
    Тип фланца/муфты статора: Servo flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037104

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 6 mm
    Тип фланца/муфты статора: Servo flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037105

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 6 mm
    Тип фланца/муфты статора: Servo flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037106

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    Mechanical data
    Диаметр вала: 6 mm
    Тип фланца/муфты статора: Servo flange
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 25 gcm²
    Maximum operating speed: 6,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 1 Ncm
    Крутящий момент на старте: 1.5 Ncm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Solid shaft
    Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)
    GEWICHT01: 0.55 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +85 °C
    Storage temperature range: -30 °C ... +90 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 30 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051809

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051810

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051811

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051812

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051793

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051794

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051795

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051796

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051801

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051802

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051803

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1051804

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Safety-related parameters
    Safety integrity level: SIL2 (IEC 61508), SILCL2 (IEC 62061)
    Category: 3 (EN ISO 13849)
    Уровень производительности: PL d EN ISO 13849 1)
    TM (mission time): 20 a (EN ISO 13849)
    Максимальная интенсивность запросов: Continuous (analog signals)
    PFHD: probability of dangerous failure per hour: 1.0 * 1E-08 2)
    MTTFd: mean time to dangerous failure: 1,073 a (EN ISO 13849)
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Resolver support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.25 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037059

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037060

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037061

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037062

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Диаметр вала: 7 mm
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Plug-in shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037083

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037084

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037085

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037086

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Rubber support
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037067

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037068

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte, 1,792 Byte (E2PROM 2048)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector, 8-pin
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
    Арт. 1037069

    At a glance

  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

    Your benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 128 Byte, 128 Byte (E2PROM 512)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate
    Dimensions: See dimensional drawing
    Moment of inertia of the rotor: 10 gcm²
    Maximum operating speed: 12,000 /min
    Maximum angular acceleration: 200,000 rad/s²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.4 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.5 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.75 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 200 mm
    Shaft version: Tapered shaft
    Angular motion perpendicular to the rotational axis, static: ± 0.005 mm/mm
    Angular motion perpendicular to the rotational axis, dynamic: ± 0.002 mm/mm
    GEWICHT01: 0.2 kg
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 80 mA 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... +115 °C
    Storage temperature range: -40 °C ... +125 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g / 10 ms / according to EN 60068-2-27
    Resistance to vibration: 20 g / 10 Hz / 2,000 Hz / according to EN 60068-2-6
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 40 (according to IEC 60529), with mating connector inserted
     
     


    Страницы:
    12
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: