Страницы:
At a glance
| Gauge pressure measurement ranges from 0 ... 1 bar up to 0 … 600 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Measuring range: | 0 bar ... 40 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: |  |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Relativdruckmessbereiche von 0 ... 1 bar bis 0 … 600 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Gauge pressure | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ B according to DIN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 10 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 16 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 25 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 25 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ B according to DIN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ female | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | M20 x 1.5 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Stainless steel | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 1.6 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | M20 x 1.5 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Stainless steel | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 2.5 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 4 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Absolute pressure measurement ranges from 0 ... 1 bar up to 0 … 25 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ female | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 1 bar bis 0 … 25 bar |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 bar ... 6 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 0,1 MPa bis 0 … 2,5 MPa |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 MPa ... 0.16 MPa | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 15 psi bis 0 …300 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 psi ... 15 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 15 psi bis 0 …300 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 psi ... 15 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 15 psi bis 0 …300 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 psi ... 15 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 15 psi bis 0 …300 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 psi ... 15 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 15 psi bis 0 …300 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 psi ... 25 psi | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Auf einen Blick
| Absolutdruckmessbereiche von 0 ... 15 psi bis 0 …300 psi |
| Eine Vielzahl an Prozessanschlüssen verfügbar |
| Keine mechanisch bewegten Teile. Dadurch verschleiß-, ermüdungs- und wartungsfrei |
| Rundum verschweißte, hermetisch dichte Edelstahlmembran |
| Ausgangssignal 4 … 20 mA, 0 … 5 V oder 0 … 10 V |
| Elektrischer Anschluss M12x1, Winkelstecker nach DIN 175301-803 A oder Kabelanschluss |
Ihr Nutzen
| Geringer Platzbedarf durch kompakte Abmessungen |
| Einfache und kostensparende Installation |
| Optimale Lösungen durch vielfältige Konfigurierbarkeit |
| Hohe Zuverlässigkeit durch robusten Aufbau |
| Hervorragendes Preis-Leistungs-Verhältnis |
| Features | |||
| Pressure type: | Absolute pressure | ||
| Measuring range: | 0 psi ... 100 psi | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 0 V ... 5 V, 3-Leiter | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 0,6 % der Spanne (bei Nichtlinearität 0,25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ B according to DIN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ female | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | 0.6 mm pressure port | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 9 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 0...10 V, 3-wire | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | ¼'' NPT | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Without seal | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 15 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 24 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ B according to EN 837 | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | Copper | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 24 bar | ||
| Температура процесса: | -30 °C ... +100 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) | ||
| Механика/электроника | |||
| Process connection: | G ½ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | FPM/FKM | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 67 | ||
| Тип подключения: | Round connector M12 x 1, 4-pin, IP 67 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -30 °C ... +100 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
At a glance
| Compound pressure measurement ranges from -1 ... 0 bar up to -1… +24 bar |
| A large variety of available process connections |
| No moving parts: No mechanical wear, fatigue-proof, maintenance-free |
| Circularly welded, hermetically sealed stainless steel membrane |
| Output signal 4 … 20 mA, 0 … 5 V or 0 … 10 V |
| Electrical connection M12x1, L-connector acc. to DIN 175301-803 A or flying leads |
Your benefits
| Compact size takes up less space |
| Simple and cost-saving installation |
| Available in a wide selection of configurations, enabling a perfect match to individual customer requirements |
| Robust design enables higher reliability |
| Excellent price/performance ratio |
| Features | |||
| Pressure type: | Compound pressure | ||
| Measuring range: | -1 bar ... 0.9 bar | ||
| Температура процесса: | 0 °C ... +80 °C | ||
| Output signal: | 4 mA ... 20 mA | ||
| Gauge pressure: | 0 bar ... 1 bar up to bar ... 600 bar | ||
| Absolute pressure: | 0 bar ... 1 bar up to 0 bar ... 25 bar | ||
| Compound pressure: | -1 bar ... 0 bar up to -1 bar ... +24 bar | ||
| Средний: | Liquid and gaseous media | ||
| Performance | |||
| Accuracy: | ≤ ± 0.5 % of span (with non-linearity 0.25 %), ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) | ||
| Non-linearity: | ≤ ± 0.25 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) | ||
| Response time: | |||
| Long-term drift/one-year stability: | ≤ 0.1 % of span according to IEC 61298-2 | ||
| Rated temperature range: | 0 °C ... +80 °C | ||
| Service life: | Minimum 100 Mio. life cycles | ||
| Non-repeatability: | ≤ 0.1 % of span | ||
| Hysteresis: | ≤ 0.16 % of span | ||
| Signal noise: | ≤ 0.3 % of span | ||
| Adjustment accuracy of zero signal: | ≤ 0.15 % of span typ., ≤ 0.4 % of span max. (with non-linerarity 0.25 %) | ||
| Механика/электроника | |||
| Process connection: | G ¼ A according to DIN 3852-E | ||
| Детали, контактирующие с измеряемой средой: | Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) | ||
| Seal: | NBR | ||
| Pressure port: | Standard | ||
| Материал корпуса: | Stainless steel 316L | ||
| Enclosure rating: | IP 65 | ||
| Тип подключения: | L-connector acc. to DIN 175301-803 A, IP 65 | ||
| Потребляемая мощность: | Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output | ||
| Electrical safety: | Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M | ||
| Protection class III: | |
||
| Weight sensor: | Ca. 80 g | ||
| Internal transmission fluid: | Silicone oil (only with pressure ranges | ||
| Isolation voltage: | 500 V DC | ||
| CE-conformity: | Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 | ||
| Reference conditions: | Reference conditions: According to IEC 61298-1 | ||
| Данные окуражающей среды | |||
| Storage temperature: | -20 °C ... +80 °C | ||
| Ambient temperature: | 0 °C ... +80 °C | ||
| Shock load: | 500 g according to IEC 60068-2-27 (mechanical shock) | ||
| Vibration load: | 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional | ||
| Relative humidity: | 45 % ... 75 % | ||
Страницы: