Facebook Mail.ru ok.ru ВКонтакте
 
+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 
 
 
 
 

DKS40

Главная » Продукция » SICK » Энкодеры » Инкрементальные энкодеры » DKS40
 
 
Страницы:
123
 



DKS40-A5J00004
Арт. 1036293

At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 4
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00010
    Арт. 1034634

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 10
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00020
    Арт. 1034635

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 20
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00050
    Арт. 1034636

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 50
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00064
    Арт. 1035661

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 64
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00100
    Арт. 1034637

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 100
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00200
    Арт. 1034638

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 200
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00250
    Арт. 1034639

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 250
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00256
    Арт. 1034640

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 256
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00360
    Арт. 1034641

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00500
    Арт. 1034642

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00512
    Арт. 1034643

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 512
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00600
    Арт. 1035204

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 600
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J00720
    Арт. 1034644

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 720
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J01000
    Арт. 1034645

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J01024
    Арт. 1034646

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,024
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J01090
    Арт. 1063729

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,090
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J01500
    Арт. 1035458

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J02000
    Арт. 1034815

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5J02048
    Арт. 1034816

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,048
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5K00050
    Арт. 1064683

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 50
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5K00100
    Арт. 1035605

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 100
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5K00360
    Арт. 1036730

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5K00500
    Арт. 1035779

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5K00600
    Арт. 1065717

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 600
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5K01000
    Арт. 1036073

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5K02048
    Арт. 1036137

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,048
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 1.5 m
    Тип подключения: Cable, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5L01000
    Арт. 1035582

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5L02000
    Арт. 1035581

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,000
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5L02048
    Арт. 1035616

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,048
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 3 m
    Тип подключения: Cable, universal, 3 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5M00360
    Арт. 1036504

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5M00500
    Арт. 1036627

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 500
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5M01024
    Арт. 1035705

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1,024
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5M02048
    Арт. 1036631

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,048
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable, universal, 5 m
    Тип подключения: Cable, universal, 5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5P00360
    Арт. 1035695

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 360
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Тип подключения: Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-A5P02048
    Арт. 1036702

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 2,048
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 4.5 V ... 5.5 V, TTL/RS422, Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Тип подключения: Cable with plug M12, 8-pin, cable with connector, universal, 1.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 4.5 V ... 5.5 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00001
    Арт. 1061657

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 1
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00005
    Арт. 1035377

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 5
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00010
    Арт. 1034647

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 10
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00016
    Арт. 1059211

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 16
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00020
    Арт. 1034648

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 20
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00030
    Арт. 1037301

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 30
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00050
    Арт. 1034649

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 50
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00060
    Арт. 1035474

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 60
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00100
    Арт. 1034650

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 100
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00125
    Арт. 1035337

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 125
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00200
    Арт. 1034651

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 200
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00250
    Арт. 1034652

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 250
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00256
    Арт. 1034653

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 256
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
    DKS40-E5J00300
    Арт. 1035475

    At a glance

  		•  Compact housing
  		• Durable, low-cost design
  		• Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  		• Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  		• Face mount flange with solid shaft
  		• Housing for simple clamping ring mounting
  		• Any line count possible from 1 to 2,048

    Your benefits

  		•  Low-cost encoder with outstanding quality
  		• Withstands harsh environmental conditions due to high IP protection class and rugged design
  		• Universal cable outlet enables axial and radial cable guidance
  		• Compact dimensions enable simple installation even where space is cramped
    Performance
    Шаг измерения: 90 °, Number of lines
    Error limits binary number of lines: 0.09 °
    Error limits non-binary number of lines: 0.13 °
    Measuring step deviation at binary number of lines: 0.035 °
    Measuring step deviation at non binary number of lines: 0.07 °
    Время инициализации: 40 s
    Pulses per revolution: 300
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 8 mm x 13 mm
    Масса: 0.18 kg
    Крутящий момент на старте: 0.6 Ncm (+20 °C)
    Момент вращения: 0.4 Ncm (+20 °C)
    Maximum operating speed: 6,000 U/min
    Moment of inertia of the rotor: 6 gcm²
    Bearing lifetime: 2 x 10^9 revolutions
    Макс. угловое ускорение: 3,6 x 10^9 rad/s²
    Permissible shaft loading radial/axial: 40 N, 20 N
    Electrical data
    Electrical interface: 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m
    Тип подключения: Cable, universal, 0.5 m
    Номинальная потребляемая мощность (без нагрузки): 40 mA
    Supply voltage: 10 V ... 30 V
    Output current: 30 mA
    Maximum output frequency: 200 kHz
    Reference signal, number: 1
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) 1)
    Данные окуражающей среды
    EMC: EN 61000-6-2, EN 61000-6-3
    Protection class housing side with cable outlet: IP 64
    Protection class shaft side: IP 64
    Protection class standard: IEC 60529
    Air humidity: 90 % 1)
    Working temperature range: 0 °C ... +60 °C
    Storage temperature range: -40 °C ... +70 °C, without package
    Устойчивость к ударам: 50 g, 7 ms (EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
     
     


    Страницы:
    123
     

     
     
    ⋆
     
      197374, г. Санкт-Петербург,
    пр. Приморский, 137 к. 2
      +7 (812) 432-38-38
      +7 (812) 432-36-36
      пн-пт. 10:00 — 18:00
    © 2005-2023 — ООО «ЭйСиЭс»

    ←

    Facebook Mail.ru ok.ru ВКонтакте
     
    Информация
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: