+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

ARS60 SSI/Parallel

 
 
 


Страницы:



Арт. 1031825

At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 0.6 Ncm
    Момент вращения: 0.4 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, axial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1034298

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 1
    Разрешающая способность: 2,048 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 0.6 Ncm
    Момент вращения: 0.4 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, axial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031702

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 0.6 Ncm
    Момент вращения: 0.4 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, axial, 10 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031674

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 256
    Макс. число оборотов: 1
    Разрешающая способность: 256 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1036446

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 512
    Макс. число оборотов: 1
    Разрешающая способность: 512 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031688

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 720
    Макс. число оборотов: 1
    Разрешающая способность: 720 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1208587

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 3,600
    Макс. число оборотов: 1
    Разрешающая способность: 3,600 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1035174

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1034514

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 7,920
    Макс. число оборотов: 1
    Разрешающая способность: 7,920 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1034774

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031712

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 10,000
    Макс. число оборотов: 1
    Разрешающая способность: 10,000 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031714

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 16,384
    Макс. число оборотов: 1
    Разрешающая способность: 16,384 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031829

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1032682

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Масса: 0.3 kg
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031673

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 256
    Макс. число оборотов: 1
    Разрешающая способность: 256 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1036513

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 512
    Макс. число оборотов: 1
    Разрешающая способность: 512 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1033019

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 3,600
    Макс. число оборотов: 1
    Разрешающая способность: 3,600 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031703

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031711

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1034865

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 16,384
    Макс. число оборотов: 1
    Разрешающая способность: 16,384 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1032698

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 22,800
    Макс. число оборотов: 1
    Разрешающая способность: 22,800 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031722

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1036501

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 512
    Макс. число оборотов: 1
    Разрешающая способность: 512 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031693

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1209996

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,440
    Макс. число оборотов: 1
    Разрешающая способность: 1,440 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037788

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 3,600
    Макс. число оборотов: 1
    Разрешающая способность: 3,600 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1036735

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1035105

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 72
    Макс. число оборотов: 1
    Разрешающая способность: 72 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1034793

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 360
    Макс. число оборотов: 1
    Разрешающая способность: 360 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1035177

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1032681

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 6 mm
    8 mm
    10 mm
    12 mm
    14 mm
    15 mm 1/4 "
    3/8 "
    1/2 " 1)
    Крутящий момент на старте: 2.2 Ncm
    Момент вращения: 1.6 Ncm
    Maximum operating speed: 3,000 /min
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 64 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1032820

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031739

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 2,000
    Макс. число оборотов: 1
    Разрешающая способность: 2,000 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1034664

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1035419

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 15
    Макс. число оборотов: 1
    Разрешающая способность: 15 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031736

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 21-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1035372

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 12
    Макс. число оборотов: 1
    Разрешающая способность: 12 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031731

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Optical and magnetic variants for the widest range of requirements
  • Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  • High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  • Robust design for maximum system availability, even in extreme environmental conditions
  • Absolutely compact - specially suited in cases where installation space is tight
  • Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 360
    Макс. число оборотов: 1
    Разрешающая способность: 360 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 22-pin, axial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031723

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 24
    Макс. число оборотов: 1
    Разрешающая способность: 24 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031724

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 34
    Макс. число оборотов: 1
    Разрешающая способность: 34 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031725

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 100
    Макс. число оборотов: 1
    Разрешающая способность: 100 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1209374

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 120
    Макс. число оборотов: 1
    Разрешающая способность: 120 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1035694

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 180
    Макс. число оборотов: 1
    Разрешающая способность: 180 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031726

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 256
    Макс. число оборотов: 1
    Разрешающая способность: 256 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1031727

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 360
    Макс. число оборотов: 1
    Разрешающая способность: 360 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1033845

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 400
    Макс. число оборотов: 1
    Разрешающая способность: 400 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038855

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 452
    Макс. число оборотов: 1
    Разрешающая способность: 452 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1036609

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 720
    Макс. число оборотов: 1
    Разрешающая способность: 720 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1033843

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 1,000
    Макс. число оборотов: 1
    Разрешающая способность: 1,000 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1034373

    At a glance

  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
  • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  • Zero-set function
  • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  • Enclosure rating: Up to IP66

    Your benefits

  • Freely programmable resolution (up to 15 bits)
  • Simple zero adjustment directly by press of a button on the encoder or via signal line (cable version)
  • Suitable for all mounting methods thanks to individual mechanical interfaces
  • A basic device for flexible use thanks to simple interchangeable collets for blind hollow shaft and through hollow shaft
  • Versions with cable and M23 connector outlet available in axial and radial designs
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.4 Ncm
    Момент вращения: 0.3 Ncm
    Permissible Load capacity of shaft: 20 N (radial)
    10 N (axial)
    Maximum operating speed: 10,000 /min (without shaft seal)
    6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 54 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 90 mA
    Interfaces
    Electrical interface: Connector M23, 21-pin, radial
    Данные окуражающей среды
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector fitted

    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
     


    Страницы:

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: