Страницы:
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 512 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 512 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 720 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 720 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 1,000 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 1,000 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 1,924 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 1,924 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 2,000 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 2,000 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 4,096 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 4,096 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 8,192 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 8,192 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,768 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,768 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 36 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 36 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 42 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 42 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 60 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 60 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 78 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 78 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 100 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 100 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 144 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 144 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 256 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 256 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 360 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 360 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 512 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 512 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 1,024 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 1,024 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 2,048 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 2,048 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 8,192 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 8,192 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,768 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,768 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 36 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 36 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 42 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 42 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 54 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 54 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 72 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 72 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 144 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 144 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 256 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 256 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 360 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 360 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 512 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 512 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 1,024 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 1,024 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 8,192 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 8,192 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 16,384 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 16,384 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,768 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,768 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 16,384 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 16,384 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 10 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, radial, 10 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 4,096 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 4,096 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 8,192 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 8,192 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 16,384 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 16,384 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,768 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,768 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 1.5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 8,192 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 8,192 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,768 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,768 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 3 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 8,192 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 8,192 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,768 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,768 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 5 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
At a glance
| Absolute singleturn encoder |
| Resolution: up to 15 bits (32,768 increments) |
| Electrical interface: SSI with gray code type or gray capped |
| Electrical interface: Parallel with gray, gray capped, binary, BCD code type |
| Zero-set function |
| Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft |
| Enclosure rating: Up to IP66 |
Your benefits
| Optical and magnetic variants for the widest range of requirements |
| Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design |
| High level of productivity due to optical encoders with a high level of precision and fast calculation of positions |
| Robust design for maximum system availability, even in extreme environmental conditions |
| Absolutely compact - specially suited in cases where installation space is tight |
| Flexible integration in all common networks |
| Performance | |||
| Max. number of steps per revolution: | 32,767 | ||
| Макс. число оборотов: | 1 | ||
| Разрешающая способность: | 32,767 x 1 | ||
| Пределы погрешности: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
||
| Repeatability (Ta not constant): | 0.005 ° | ||
| Measuring step deviation: | 0.005 °, 0.016 ° | ||
| Шаг измерения: | 360 ° /number of lines | ||
| Время инициализации: | 80 ms 1) | ||
| Mechanical data | |||
| Механический интерфейс: | Blind hollow shaft | ||
| Диаметр вала: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " 1) |
||
| Крутящий момент на старте: | 0.6 Ncm | ||
| Момент вращения: | 0.4 Ncm | ||
| Maximum operating speed: | 3,000 /min | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Макс. угловое ускорение: | 500,000 rad/s² | ||
| Допустимые осевое движение статическая/динамическая: | ± 0.5 mm, ± 0.2 mm | ||
| Допустимое радиальное движение статический/динамический: | ± 0.3 mm, ± 0.1 mm | ||
| Установка нуля: | ≥ 100 ms 2) | ||
| Electrical data | |||
| Диапазон рабочего напряжения: | 10 V DC ... 32 V DC | ||
| Номинальная потребляемая мощность (без нагрузки): | 90 mA | ||
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) 1) | ||
| Interfaces | |||
| Electrical interface: | Cable, 22-pin, axial, 10 m | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) 1) | ||
| Enclosure rating: | IP 66 (according to IEC 60529) | ||
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) | ||
| Working temperature range: | -20 °C ... 85 °C | ||
| Storage temperature range: | -40 °C ... 100 °C | ||
| Устойчивость к ударам: | 50 g (according to EN 60068-2-27) | ||
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
Страницы: