+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

AFS/AFM60 SSI

 
 
 


Страницы:



Арт. AFM60A-THPL262144

At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 4,096
    Разрешающая способность: 262,144 x 4,096
    Resolution: 18 bit x 12 bit
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60A-THPM262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 4,096
    Разрешающая способность: 262,144 x 4,096
    Resolution: 18 bit x 12 bit
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1052631

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 4,096
    Разрешающая способность: 262,144 x 4,096
    Resolution: 18 bit x 12 bit
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 820 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray + Incremental, TTL/HTL, programmable
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1054239

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 4,096
    Разрешающая способность: 262,144 x 4,096
    Resolution: 18 bit x 12 bit
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Maximum output frequency: 200 kHz
    Load resistance min.: 120 Ω
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray + Sin/Cos, 1.024 Perioden, programmable
    Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Signal before differential generation: ± 20 %
    Signal offset: 2.5 V ± 10 %
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1058680

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 4,096
    Разрешающая способность: 262,144 x 4,096
    Resolution: 18 bit x 12 bit
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 820 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray + Incremental, TTL
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBAA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBAC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M12, 8-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBAK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 1.5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBAL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 3 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBAM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBKA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Maximum output frequency: 200 kHz
    Load resistance min.: 120 Ω
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Signal before differential generation: ± 20 %
    Signal offset: 2.5 V ± 10 %
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBLA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 600 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBPA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBPC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M12, 8-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBPK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 1.5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBPL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 3 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBPM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBRA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 600 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1058566

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Maximum output frequency: 200 kHz
    Load resistance min.: 120 Ω
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Signal before differential generation: ± 20 %
    Signal offset: 2.5 V ± 10 %
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BBTA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 600 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCAA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCAC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M12, 8-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCAK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 1.5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCAL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 3 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCAM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCKA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Maximum output frequency: 200 kHz
    Load resistance min.: 120 Ω
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Signal before differential generation: ± 20 %
    Signal offset: 2.5 V ± 10 %
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCLA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 600 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCPA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCPC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M12, 8-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCPK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 1.5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCPL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 3 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCPM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCRA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 600 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCSA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Maximum output frequency: 200 kHz
    Load resistance min.: 120 Ω
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Signal before differential generation: ± 20 %
    Signal offset: 2.5 V ± 10 %
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BCTA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 3/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 600 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1054686

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 4,096
    Разрешающая способность: 8,192 x 4,096
    Resolution: 13 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BDAA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1054711

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M12, 8-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BDAC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M12, 8-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1050975

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 4,096
    Разрешающая способность: 8,192 x 4,096
    Resolution: 13 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 1.5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BDAK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 1.5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1054522

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 3 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1050279

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 4,096
    Разрешающая способность: 8,192 x 4,096
    Resolution: 13 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 3 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1050280

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 4,096
    Разрешающая способность: 8,192 x 4,096
    Resolution: 13 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BDKA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Maximum output frequency: 200 kHz
    Load resistance min.: 120 Ω
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Signal before differential generation: ± 20 %
    Signal offset: 2.5 V ± 10 %
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFM60B-BDLA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 90 ° elektrisch / Strichzahl
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    Load current max.: 30 mA
    Maximum output frequency: 600 kHz
    Reference signal, position: 90 °, electronically, gated with A and B
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051109

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051111

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M12, 8-pin, radial
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051113

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 1.5 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051117

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 4,096
    Разрешающая способность: 32,768 x 4,096
    Resolution: 15 bit x 12 bit
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 8-pin, universal, 3 m 1)
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 2)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
     


    Страницы:

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: