EZ-SCREEN Low-Profile Safety Light Curtain Systems

Connects Type 4 EZ-SCREEN safety light screens and EZ-SCREEN Grids and Points to AC power
Supplies +24V dc power at 0.7 amps (16.8 W max.) and accepts AC input from 100 to 250V (50-60 Hz)
Powers up to three receivers, or two cascaded emitter-receiver pairs, or four emitters (emitter-only models)
Offers a variety of safety output options
Offers external device monitoring (EDM) on some models

The space-saving, compact profile of the EZ-SCREEN LP is ideal for smaller machines, yet robust enough to meet the demands of large power presses.

Compact profile and multiple mounting options make EZ-SCREEN LP Safety Light Screens a perfect fit for a wide range of machine safety applications
Exceeds OSHA/ANSI Control Reliability requirements, certified to cULus NIPF, and CE certified to Type 4, Category 4PLe and SIL 3
Available in nickel-plated housings for ESD-safe applications, clear anodized aluminum housing or "safety" yellow powder-coat housing
14 mm or 25 mm resolution; defined areas from 270 to 1810 mm (10.6″ to 71.2″)
Positions first and last beam at the ends for continuous sensing; included side-mount brackets allow no "dead" zone
Provides response times as fast as 8 milliseconds with detection ranges up to 7 m

EZ-SCREEN Low-Profile Cascade models allow four systems—of any length and resolution—to be connected in series, forming a single safety device.

Provides continuous detection without overlapping light curtains or protruding cables; flexible mounting options
Cascading adds only 2 ms to overall response time for each additional segment
Standard models can be used as end systems in the cascade
E-Stop, Safety Switches, or Safety Module contacts can be interfaced at the end receiver
Easily configured Reduced Resolution and Fixed Blanking with a remote teach option
Zone and Status indicators plus digital display to indicate number of beams blocked and detailed diagnostics
Two solid-state OSSD safety outputs; includes selectable trip/latch output
Selectable auxiliary output option to monitor the state of the OSSDs or monitor receiver and emitter lockouts
Exceeds OSHA/ANSI Control Reliability requirements, and CE certified to Type 4, Category 4 PLe and SIL 3

Low-Profile safety light curtain with continuous detection along the entire light screen length to eliminate "dead zones."

Low-profile, compact package for smaller production machines, yet robust enough for large power presses
Creates a screen of synchronized, modulated infrared sensing beams that extend from end to end of the housing (no "dead zone")
Built-in muting function, no third box required. Capable of two or four mute device/sensor hookup options
Seven different, predefined, muting configuration options, including Bypass, Mute-Dependent Override, Mute Enable, and Mute-cycle time extensions (4 seconds) for "L"-style cell exit applications
Selectable monitored/non-monitored Mute Lamp, Reset Status, and two OSSD Status Outputs to EZ-LIGHT (or other indicating devices) with RD cordset and accessory end-cap mounting bracket
Optional CSM Muting Splitter Cordset provides easy set up, less wiring, lower installation costs by providing a complete QD connectorized solution
Status, Reset, Zone, Mute Device and Diagnostic indicators and displays tell the number and location of beams blocked and provide detailed diagnostics minimizing downtime and troubleshooting
Set up can be performed without a PC, hand-held programmer, or other device; and DIP switch configuration features many of the same functions as a standard EZ-SCREEN Low Profile
100 mm to 7 m (4" to 23') sensing range
Highly immune to EMI, RFI, ambient light, weld flash and strobe light

⋆