- Available spans range from 6 to 100 m.
- Trip and latch switch models are available.
- Minimum switch life is 1 million operations.
- Heavy-duty switch housings withstand harsh environments.
- Switch activates if the rope is pulled, becomes loose or breaks.
- Design meets positive opening requirements for rope pull switches.
- Activates if the rope is pulled, becomes loose or breaks
- Allows rope span to 6 m
- Features compact housing—only 40 mm wide at base
- Provides three contact states for two normally closed (NC) safety contacts
- Both contacts are closed in Run position.
- One contact opens when rope is pulled.
- The other opens if rope breaks or tension is less than normal.
- Offers choice of models with trip or latch actuation
- Trip actuation returns immediately to the Run condition after releasing the rope, following a pull
- Latch actuation requires a manual reset after each pull
- Provides minimum switch life of 1-million operations
- Constructed of heavy-duty die-cast metal for demanding industrial environments
Activates if the rope is pulled, becomes loose or breaks.
- Allows rope span to 75 m
- Features compact housing—only 43 mm wide at base
- Provides two contact states for two normally closed (NC) safety contacts
- Both contacts are closed in Run position.
- Both contact opens when rope is pulled, breaks or if tension is reduced from normal amount.
- Includes two normally open (NO) non-safety auxiliary contacts
- Features indicator for proper rope tensioning
- Offers models with integral clamping and tensioning head for quick rope fixing and tensioning
- Available in model with E-stop push button for manual reset
- Provides minimum switch life of 1 million operations
- Constructed of heavy-impact thermoplastic for demanding industrial environments
- Activates if the rope is pulled, becomes loose or breaks
- Available in models with rope span of 6, 12 or 20 m
- Offered with either two or four normally open (NC) safety contacts and a variety of contact states, depending on model
- Contacts are closed with normal rope tension.
- A minimum of one contact opens if rope is pulled, breaks or if tension is below normal.
- Includes model with two normally open (NO) non-safety auxiliary contacts
- Provides minimum switch life of 1 million operations
- Constructed of heavy-duty die-cast metal for demanding industrial environments
- Activates if the rope is pulled, becomes loose or breaks
- Allows rope span to 100 m, with rope switch in center
- Provides two contact states for two normally closed (NC) safety contacts
- Both contacts are closed in Run position.
- Both contacts opens when rope is pulled, breaks or if tension is below normal
- Includes two normally open (NO) non-safety auxiliary contacts
- Provides minimum switch life of 1 million operations
- Constructed of heavy-duty die-cast metal for demanding industrial environments
The rugged RP-RM83F series rope pulls made of heavy-duty die-cast aluminum housings and are ideal for indoor or outdoor use.
- Contacts latch open when rope is pulled or in case of a broken wire; requires manual reset
- Rated IP67 and NEMA 4, suitable for demanding indoor and outdoor industrial environments
- Designed for quick, easy rope adjustment
- Rope spans up to 75 m (245'), depending on model
- Both safety contacts are closed with normal rope tension, and open when the rope is pulled, if it breaks, or if tension is reduced
- Both monitoring contacts operate opposite the safety contacts, for monitoring by another device
- Additional Aux. 24V solid-state PNP output on some models provides remote rope tension monitoring
- Tension indicator window indicates proper rope tension for operation or safety contacts latched open