Система IDL для определения выполняет анализ писем и посылок на непрерывном конвейере, наклонных лотках, перекрестных конвейерных системах.
- Определение и подсчет позиций с мин. высотой 2 мм
- Точное измерение положения на конвейере или в лотке
- Сдвоенное определение, разграничение изделий (чрезмерно близкое размещение), условия соприкосновения и связки
- Предварительная калибровка измерительной головки в коррпусе IP 65
- Комплексная характеристика объекта в трехмерном выражении до 3 м/с
- Классификация по высоте
The IDL system for item detection performs an analysis of letters and parcels on continuous belts, tilt trays and cross belt conveyor systems. The IDL system provides information about the number of items, their position and other characteristics used to increase throughput by reducing missorts and optimizing the off load process. Reliable operation of the sorter requires adequate distance between packages and the detection of packages that are on top of each other. IDL provides accurate singulation verification and classifies packages as singles or doubles. A strength of IDL is its use of both 3D shape and 2D grayscale imaging. Using laser triangulation for 3D imaging is ideal for small- to medium-sized items. Items as small as 2 mm high can be accurately analyzed, increasing efficiency in product streams that contain both flats and packages. By measuring position, volume, occupied area and product overhang, the IDL system increases throughput and efficiency of the sorter.
At a glance
| Detection and counting of items of heights down to 2 mm |
| Accurate measurement of item position on belt or tray |
| Doubles detection including side-by-side, product spacing (too close), touching and piggy-back conditions |
| Pre-calibrated measurement head in IP 65 housing |
| Full-range item characteristics in 3D in up to 3 m/s |
| Classify items by height measurement |
Your benefits
| Sorting center throughput is maximized |
| Position measurement enables additional sort destinations with existing sort footprint |
| Minimized recirculation results in reduced package handling and minimized costs for damage |
| Handling costs are decreased due to decreased missorts |
| Classification of items into correct price category |
| Easy and inexpensive integration by simple installation over-the-belt and easy connection to sorter protocols |
| Features | |||
| Type of system: | Item detection system | ||
| Laser class: | 2M | ||
| Applications: | Doubles detection, footprint position and volume, object classification | ||
| System features: | Full-range item characteristics in 3D down to 2 mm height | ||
| Field of view width: | 500 mm ... 1,550 mm | ||
| Sensing distance: | 280 mm ... 1,280 mm | ||
| Максимальный диапазон высоты: | 1,000 mm | ||
| Источник света: | Laser, red, 660 nm 1) | ||
| Performance | |||
| Транспортная скорость: | ≤ 3 m/s | ||
| Detectable object shape: | All shapes, singulated or piggy-backs | ||
| Minimum object size: | 50 mm x 50 mm x 2 mm | ||
| Maximum object size: | 2,500 mm x 750 mm x 750 mm (depends on the configuration) | ||
| Output data: | Singulation type, separation distance, length, width, height, area, volume, X-, Y- and Z-position of item center, overhang | ||
| Interfaces | |||
| Operator interface: | Ranger Studio, IDL, SOPAS | ||
| Ethernet: |  |
||
| Electrical connection (Ethernet): | Harting, push-pull | ||
| PROFIBUS: | |
||
| Serial (RS-232, RS-422): | |
||
| Encoder interface: | HTL | ||
| Максимальная частота энкодера: | 30 kHz | ||
| Механика/электроника | |||
| Supply voltage: | AC 100 V ... 240 V +/- 15% | ||
| Вес: | 7 kg | ||
| Dimensions (L x W x H): | 420 mm x 107 mm x 163 mm | ||
| Enclosure rating: | IP 65 | ||
| Материал корпуса: | Aluminum | ||
| Цвет корпуса: | Gray, varnished | ||
| Разъемы: | M12, 8-pin socket (encoder) | ||
| Power I/O connection: | Male connector M12, 8-pin | ||
| Connector material: | Ethernet: thermoplast/anodized aluminum, M12: nickel-plated brass | ||
| Материал окна: | Float glass, AR-coated | ||
| Данные окуражающей среды | |||
| Shock load: | 15 g, 3 x 6 directions | ||
| Vibration load: | 5 g, 58 Hz ... 150 Hz | ||
| Ambient operating temperature: | 0 °C ... +40 °C 1) | ||
| Температура хранения: | -30 °C ... +70 °C 2) | ||
The IDL system for item detection performs an analysis of letters and parcels on continuous belts, tilt trays and cross belt conveyor systems. The IDL system provides information about the number of items, their position and other characteristics used to increase throughput by reducing missorts and optimizing the off load process. Reliable operation of the sorter requires adequate distance between packages and the detection of packages that are on top of each other. IDL provides accurate singulation verification and classifies packages as singles or doubles. A strength of IDL is its use of both 3D shape and 2D grayscale imaging. Using laser triangulation for 3D imaging is ideal for small- to medium-sized items. Items as small as 2 mm high can be accurately analyzed, increasing efficiency in product streams that contain both flats and packages. By measuring position, volume, occupied area and product overhang, the IDL system increases throughput and efficiency of the sorter.
At a glance
| Detection and counting of items of heights down to 2 mm |
| Accurate measurement of item position on belt or tray |
| Doubles detection including side-by-side, product spacing (too close), touching and piggy-back conditions |
| Pre-calibrated measurement head in IP 65 housing |
| Full-range item characteristics in 3D in up to 3 m/s |
| Classify items by height measurement |
Your benefits
| Sorting center throughput is maximized |
| Position measurement enables additional sort destinations with existing sort footprint |
| Minimized recirculation results in reduced package handling and minimized costs for damage |
| Handling costs are decreased due to decreased missorts |
| Classification of items into correct price category |
| Easy and inexpensive integration by simple installation over-the-belt and easy connection to sorter protocols |
| Features | |||
| Type of system: | Item detection system | ||
| Laser class: | 2M | ||
| Applications: | Doubles detection, footprint position and volume, object classification | ||
| System features: | Full-range item characteristics in 3D down to 2 mm height | ||
| Field of view width: | 450 mm ... 820 mm | ||
| Sensing distance: | 415 mm ... 865 mm | ||
| Максимальный диапазон высоты: | 450 mm | ||
| Источник света: | Laser, red, 660 nm 1) | ||
| Performance | |||
| Транспортная скорость: | ≤ 3 m/s | ||
| Detectable object shape: | All shapes, singulated or piggy-backs | ||
| Minimum object size: | 50 mm x 50 mm x 2 mm | ||
| Maximum object size: | 2,500 mm x 420 mm x 420 mm (depends on the configuration) | ||
| Output data: | Singulation type, separation distance, length, width, height, area, volume, X-, Y- and Z-position of item center, overhang | ||
| Interfaces | |||
| Operator interface: | Ranger Studio, IDL, SOPAS | ||
| Ethernet: | |
||
| Electrical connection (Ethernet): | Harting, push-pull | ||
| PROFIBUS: | |
||
| Serial (RS-232, RS-422): | |
||
| Encoder interface: | HTL | ||
| Максимальная частота энкодера: | 30 kHz | ||
| Механика/электроника | |||
| Supply voltage: | AC 100 V ... 240 V +/- 15% | ||
| Вес: | 7 kg | ||
| Dimensions (L x W x H): | 420 mm x 107 mm x 163 mm | ||
| Enclosure rating: | IP 65 | ||
| Материал корпуса: | Aluminum | ||
| Цвет корпуса: | Gray, varnished | ||
| Разъемы: | M12, 8-pin socket (encoder) | ||
| Power I/O connection: | Male connector M12, 8-pin | ||
| Connector material: | Ethernet: thermoplast/anodized aluminum, M12: nickel-plated brass | ||
| Материал окна: | Float glass, AR-coated | ||
| Данные окуражающей среды | |||
| Shock load: | 15 g, 3 x 6 directions | ||
| Vibration load: | 5 g, 58 Hz ... 150 Hz | ||
| Ambient operating temperature: | 0 °C ... +40 °C 1) | ||
| Температура хранения: | -30 °C ... +70 °C 2) | ||