At a glance
| Ability to cascade 32 sensors with up to 30 m per segment in compliance with performance level e |
| Compatible with sensors from all manufacturers |
| Detailed diagnostic information |
| Integrated standard inputs and outputs |
| Power supply for sensors is included |
| Unscreened standard cable with M12 connectivity |
| IP 65 and IP 67 enclosure rating |
| Intelligent accessories for field diagnostics and commissioning |
Your benefits
| Cascading of safety switches and safety sensors with OSSD outputs minimizes the wiring effort and the number of inputs of the safety controller, which saves costs |
| Easy retrofitting of existing machines |
| Simple calculation of the performance level saves time since the Flexi Loop node monitors each sensor individually |
| User-friendly due to quick and easy configuration |
| Ability to be used over long distances increases application flexibility |
| Detailed diagnostic information minimizes system downtime |
| Seamless system integration and communication with other SICK safety controllers |
| Detailed status information on Flexi Loop components, diagnostics accessories, and safety controller enable quick and easy field diagnostics |
| Safety-related parameters | |||
| Safety integrity level: | SIL3 (IEC 61508) SILCL3 (EN 62061) |
||
| Category: | Category 4 (EN ISO 13849-1) | ||
| Уровень производительности: | PL e (EN ISO 13849-1) | ||
| PFHd: | 0.76 * 1E-09 (EN ISO 13849) | ||
| TM (mission time): | 20 a (EN ISO 13849) | ||
| Safe state in the event of a fault: | The sensor cascade has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit. | ||
| Functions | |||
| Cross-circuit: | Monitoring via Flexi Loop node | ||
| Short-circuit: | Monitoring via Flexi Loop node | ||
| Расхождение ошибки: | Monitoring via Flexi Loop node | ||
| Sequence errors: | Monitoring via Flexi Loop node | ||
| Mechanical data | |||
| Dimensions (W x H x D): | 68.15 mm x 45 mm x 18 mm | ||
| Вес: | 28 g (± 5 %) | ||
| Electrical data | |||
| Класс защиты: | III (EN 61140) | ||
| Type of supply voltage: | SELV | ||
| Supply voltage Vs: | 24 V DC (16.8 V DC ... 30 V DC) | ||
| Потребляемая мощность: | 55 mA | ||
| Interfaces | |||
| Safety device connection: | Dual-channel equivalent electro-mechanical safety switch (EMSS) | ||
| Flexi Loop вход: | To connect a Flexi Loop predecessor module, or to connect a Flexi Loop string with the safety controller Flexi Soft. | ||
| Flexi Loop выход: | To connect a Flexi Loop successor module, or to terminate a Flexi Loop string with the Flexi Loop termination element. | ||
| Connection type safety device: | Female connector M12, 5-pin | ||
| Connection type Flexi Loop input: | Connector M12, 5-pin | ||
| Connection type Flexi Loop output: | Female connector M12, 5-pin | ||
| Number of non-safe inputs: | 0 | ||
| Number of non-safe outputs: | 0 | ||
| Power supply output for external devices: | - | ||
| IO-Link: | - | ||
| Данные окуражающей среды | |||
| Enclosure rating: | IP 65, IP 67 (EN 60529) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Storage temperature: | -25 °C ... +70 °C | ||
| Electromagnetic compatibility (EMC): | Class A (EN 61000-6-2, EN 55011) | ||
| Shock resistance (continuous shock): | 10 g, 16 ms (EN 60068-2-64) | ||
| Shock resistance (single shock): | 30 g, 11 ms (EN 60068-2-27) | ||