At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Light switching | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Connector M12, 4-pin 6) | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 40 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 100 mm ... 300 mm 1) | ||
| Диапазон измерений: | 100 mm ... 300 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (300 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 5-wire, 5 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 100 mm ... 300 mm 1) | ||
| Диапазон измерений: | 100 mm ... 300 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (300 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Connector M12, 4-pin 6) | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 40 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Connector M12, 4-pin 6) | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 40 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | NPN, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Connector M12, 4-pin 6) | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 40 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 100 mm ... 300 mm 1) | ||
| Диапазон измерений: | 100 mm ... 300 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (300 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 5 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Cable, 4-wire, 5 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.18 mm² | ||
| Cable diameter: | Ø 3.8 mm | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 150 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 100 mm ... 300 mm 1) | ||
| Диапазон измерений: | 100 mm ... 300 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (300 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Connector M12, 4-pin 6) | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 40 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Connector M12, 4-pin 6) | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 40 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 65 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | ≤ 5 Vpp 2) | ||
| Потребляемая мощность: | ≤ 35 mA 3) | ||
| Output type: | PNP, open collector | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Selectable via L/D control wire | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 3 ms 4) | ||
| Частота переключений: | 160 Hz 5) | ||
| Тип подключения: | Connector M12, 4-pin 6) | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Класс защиты: | III | ||
| Вес: | 40 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| EMC: | EN 60947-5-2 11) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 60 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 100 mm ... 300 mm 1) | ||
| Диапазон измерений: | 100 mm ... 300 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (300 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC, 24 V DC ... 240 V DC 1)2) | ||
| Потребляемая мощность: | ≤ 5 VA | ||
| Output type: | Relay, electrically isolated 3) | ||
| Output function: | Change-over contacts | ||
| Режим переключения: | Light switching 4) | ||
| Switching current (switching voltage): | 3 A (240 V AC), 3 A (30 V DC) | ||
| Response time: | ≤ 15 ms | ||
| Частота переключений: | 33 Hz 5) | ||
| Тип подключения: | Cable, 5-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.76 mm² | ||
| Cable diameter: | Ø 6.4 mm | ||
| Защита цепи: | A, C 7)8) | ||
| Класс защиты: | II 9) | ||
| Overvoltage category: | 2 | ||
| Вес: | 160 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 10) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 60 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC, 24 V DC ... 240 V DC 1)2) | ||
| Потребляемая мощность: | ≤ 5 VA | ||
| Output type: | Relay, electrically isolated 3) | ||
| Output function: | Change-over contacts | ||
| Режим переключения: | Light switching 4) | ||
| Switching current (switching voltage): | 3 A (240 V AC), 3 A (30 V DC) | ||
| Response time: | ≤ 15 ms | ||
| Частота переключений: | 33 Hz 5) | ||
| Тип подключения: | Cable, 5-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.76 mm² | ||
| Cable diameter: | Ø 6.4 mm | ||
| Защита цепи: | A, C 7)8) | ||
| Класс защиты: | II 9) | ||
| Overvoltage category: | 2 | ||
| Вес: | 160 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 10) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 60 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC, 24 V DC ... 240 V DC 1)2) | ||
| Потребляемая мощность: | ≤ 5 VA | ||
| Output type: | Relay, electrically isolated 3) | ||
| Output function: | Change-over contacts | ||
| Режим переключения: | Light switching 4) | ||
| Switching current (switching voltage): | 3 A (240 V AC), 3 A (30 V DC) | ||
| Response time: | ≤ 15 ms | ||
| Частота переключений: | 33 Hz 5) | ||
| Тип подключения: | Cable, 5-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.76 mm² | ||
| Cable diameter: | Ø 6.4 mm | ||
| Защита цепи: | A, C 7)8) | ||
| Класс защиты: | II 9) | ||
| Overvoltage category: | 2 | ||
| Вес: | 160 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 10) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 60 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 100 mm ... 300 mm 1) | ||
| Диапазон измерений: | 100 mm ... 300 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns | ||
| Light spot size (distance): | Ø 30 mm (300 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC, 24 V DC ... 240 V DC 1)2) | ||
| Потребляемая мощность: | ≤ 5 VA | ||
| Output type: | Relay, electrically isolated 3) | ||
| Output function: | Change-over contacts | ||
| Режим переключения: | Light switching 4) | ||
| Switching current (switching voltage): | 3 A (240 V AC), 3 A (30 V DC) | ||
| Response time: | ≤ 15 ms | ||
| Частота переключений: | 33 Hz 5) | ||
| Тип подключения: | Cable, 5-wire, 5 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.76 mm² | ||
| Cable diameter: | Ø 6.4 mm | ||
| Защита цепи: | A, C 7)8) | ||
| Класс защиты: | II 9) | ||
| Overvoltage category: | 2 | ||
| Вес: | 330 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 10) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 60 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 150 mm ... 500 mm 1) | ||
| Диапазон измерений: | 150 mm ... 500 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 30 mm (500 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC, 24 V DC ... 240 V DC 1)2) | ||
| Потребляемая мощность: | ≤ 5 VA | ||
| Output type: | Relay, electrically isolated 3) | ||
| Output function: | Change-over contacts | ||
| Режим переключения: | Light switching 4) | ||
| Switching current (switching voltage): | 3 A (240 V AC), 3 A (30 V DC) | ||
| Response time: | ≤ 15 ms | ||
| Частота переключений: | 33 Hz 5) | ||
| Тип подключения: | Cable, 5-wire, 5 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.76 mm² | ||
| Cable diameter: | Ø 6.4 mm | ||
| Защита цепи: | A, C 7)8) | ||
| Класс защиты: | II 9) | ||
| Overvoltage category: | 2 | ||
| Вес: | 330 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 10) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||
At a glance
| Visible red Bright Light LED |
| Background suppression |
| Potentiometer with an easy-to-read positioning indicator for adjusting the sensing range |
| Cable or rotatable M12 connector |
| Operating mode (light/dark) selectable via control wire |
| Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in compact design |
Your benefits
| Visible red light Bright Light LED simplifies alignment and easy-to-read positioning indicator for simple commissioning |
| Reliable object detection in difficult ambient light conditions |
| Cable or rotatable M12 connector provide installation flexibility |
| Operating mode (light/dark) is selectable via a control cable to reduce the number of device variants |
| Variants with DC voltage and universal AC/DC voltage in the same housing provide increased flexibility |
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 20 mm x 60 mm x 43.9 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 200 mm ... 1,000 mm 1) | ||
| Диапазон измерений: | 200 mm ... 1,000 mm 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | BrightLight LED 3) | ||
| Angle of dispersion: | Ca. 3 ° | ||
| Регулировки: | Potentiometer, 2 turns 4) |
||
| Light spot size (distance): | Ø 35 mm (1,000 mm) | ||
| Механика/электроника | |||
| Supply voltage: | 24 V AC/DC ... 240 V AC/DC, 24 V DC ... 240 V DC 1)2) | ||
| Потребляемая мощность: | ≤ 5 VA | ||
| Output type: | Relay, electrically isolated 3) | ||
| Output function: | Change-over contacts | ||
| Режим переключения: | Light switching 4) | ||
| Switching current (switching voltage): | 3 A (240 V AC), 3 A (30 V DC) | ||
| Response time: | ≤ 15 ms | ||
| Частота переключений: | 33 Hz 5) | ||
| Тип подключения: | Cable, 5-wire, 5 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.76 mm² | ||
| Cable diameter: | Ø 6.4 mm | ||
| Защита цепи: | A, C 7)8) | ||
| Класс защиты: | II 9) | ||
| Overvoltage category: | 2 | ||
| Вес: | 330 g | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Items supplied: | BEF-W250 mounting bracket | ||
| Usage category: | AC-15, DC-13, According to EN 60947-1 | ||
| EMC: | EN 60947-5-2 10) | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS, Plastic | ||