At a glance
| Autocollimation optics |
| Polarizing filter |
| Highly visible red sender LED |
| Operation via potentiometer |
| Sensors meet requirements of Category 3G/3D |
Your benefits
| Autocollimation optics and polarizing filters ensure reliable detection of shiny objects |
| Quick and easy alignment and setup due to highly visible red light |
| Reliable use in potentially explosive atmospheres |
| Application-specific sensitivity control via potentiometer |
| Quick and easy installation due to a wide range of accessories, especially reflectors |
| Features | |||
| Sensor/detection principle: | Photoelectric retro-reflective sensor, autocollimation | ||
| Dimensions (W x H x D): | 23.6 mm x 117 mm x 49.3 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 0 m ... 7 m 1) | ||
| Диапазон измерений: | 0 m ... 5 m 2) | ||
| Type of light: | Visible red light | ||
| Источник света: | LED 3) | ||
| Длина волны: | 645 nm | ||
| Angle of dispersion: | 1.8 ° | ||
| Регулировки: | Potentiometer, 1 turn | ||
| Light spot size (distance): | Ø 40 mm (2 m) | ||
| Continuous threshold adaption: | - | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Пульсации: | 2) | ||
| Потребляемая мощность: | 40 mA 3) | ||
| Output type: | PNP | ||
| Режим переключения: | Светлое/темное переключение | ||
| Output current Imax.: | 100 mA | ||
| Response time: | 4) | ||
| Частота переключений: | ± 1,000 Hz 5) | ||
| Тип подключения: | Cable with connector M12, 4-pin, 0.29 m 6) | ||
| Материал кабеля: | PVC | ||
| Защита цепи: | A, C, D 7)8)9) | ||
| Вес: | 300 g | ||
| Поляризационный фильтр: |  |
||
| Special device: | - | ||
| Материал оптики: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| ATEX marking: | EX II 3D IP67 T70 °C EX II 3G EEx nA II T4 X 10) |
||
| Ex area category: | 3D, 3G | ||
| Ambient operating temperature: | -40 °C ... +60 °C | ||
| Температура хранения: | -40 °C ... +75 °C | ||
| Материал корпуса: | ABS, Plastic | ||